Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> On 9/17/12, Praveen Paneri <p.paneri@xxxxxxxxxxx> wrote: > This driver uses usb_phy interface to interact with s3c-hsotg. Supports > phy_init and phy_shutdown functions to enable/disable phy. Tested with > smdk6410 and smdkv310. More SoCs can be brought under later. > > Signed-off-by: Praveen Paneri <p.paneri@xxxxxxxxxxx> > Acked-by: Heiko Stuebner <heiko@xxxxxxxxx> > --- > .../devicetree/bindings/usb/samsung-usbphy.txt | 9 + > drivers/usb/phy/Kconfig | 8 + > drivers/usb/phy/Makefile | 1 + > drivers/usb/phy/samsung-usbphy.c | 360 > ++++++++++++++++++++ > include/linux/platform_data/samsung-usbphy.h | 27 ++ > 5 files changed, 405 insertions(+), 0 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/usb/samsung-usbphy.txt > create mode 100644 drivers/usb/phy/samsung-usbphy.c > create mode 100644 include/linux/platform_data/samsung-usbphy.h > > diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt > b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt > new file mode 100644 > index 0000000..fefd9c8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt > @@ -0,0 +1,9 @@ > +* Samsung's usb phy transceiver > + > +The Samsung's phy transceiver is used for controlling usb otg phy for > +s3c-hsotg usb device controller. > + > +Required properties: > +- compatible : should be "samsung,exynos4210-usbphy" > +- reg : base physical address of the phy registers and length of memory > mapped > + region. > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > index 63c339b..313685f 100644 > --- a/drivers/usb/phy/Kconfig > +++ b/drivers/usb/phy/Kconfig > @@ -32,3 +32,11 @@ config MV_U3D_PHY > help > Enable this to support Marvell USB 3.0 phy controller for Marvell > SoC. > + > +config SAMSUNG_USBPHY > + bool "Samsung USB PHY controller Driver" > + depends on USB_S3C_HSOTG > + select USB_OTG_UTILS > + help > + Enable this to support Samsung USB phy controller for samsung > + SoCs. > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile > index b069f29..55dcfc1 100644 > --- a/drivers/usb/phy/Makefile > +++ b/drivers/usb/phy/Makefile > @@ -8,3 +8,4 @@ obj-$(CONFIG_OMAP_USB2) += omap-usb2.o > obj-$(CONFIG_USB_ISP1301) += isp1301.o > obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o > obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o > +obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o > diff --git a/drivers/usb/phy/samsung-usbphy.c > b/drivers/usb/phy/samsung-usbphy.c > new file mode 100644 > index 0000000..95ec4d0 > --- /dev/null > +++ b/drivers/usb/phy/samsung-usbphy.c > @@ -0,0 +1,360 @@ > +/* linux/drivers/usb/phy/samsung-usbphy.c > + * > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx> > + * > + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG > controller > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/usb/otg.h> > +#include <linux/platform_data/samsung-usbphy.h> > + > +/* Register definitions */ > + > +#define S3C_PHYPWR (0x00) > + > +#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0) > +#define S3C_PHYPWR_OTG_DISABLE (1 << 4) > +#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3) > +#define S3C_PHYPWR_FORCE_SUSPEND (1 << 1) > +/* For Exynos4 */ > +#define EXYNOS4_PHYPWR_NORMAL_MASK (0x39 << 0) > +#define EXYNOS4_PHYPWR_SLEEP (1 << 5) > + > +#define S3C_PHYCLK (0x04) > + > +#define S3C_PHYCLK_MODE_SERIAL (1 << 6) > +#define S3C_PHYCLK_EXT_OSC (1 << 5) > +#define S3C_PHYCLK_COMMON_ON_N (1 << 4) > +#define S3C_PHYCLK_ID_PULL (1 << 2) > +#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0) > +#define S3C_PHYCLK_CLKSEL_SHIFT (0) > +#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0) > +#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0) > +#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0) > + > +#define S3C_RSTCON (0x08) > + > +#define S3C_RSTCON_PHYCLK (1 << 2) > +#define S3C_RSTCON_HCLK (1 << 1) > +#define S3C_RSTCON_PHY (1 << 0) > + > +#ifndef MHZ > +#define MHZ (1000*1000) > +#endif > + > +enum samsung_cpu_type { > + TYPE_S3C64XX, > + TYPE_EXYNOS4210, > +}; > + > +/* > + * struct samsung_usbphy - transceiver driver state > + * @phy: transceiver structure > + * @plat: platform data > + * @dev: The parent device supplied to the probe function > + * @clk: usb phy clock > + * @regs: usb phy register memory base > + * @ref_clk_freq: reference clock frequency selection > + * @cpu_type: machine identifier > + */ > +struct samsung_usbphy { > + struct usb_phy phy; > + struct samsung_usbphy_data *plat; > + struct device *dev; > + struct clk *clk; > + void __iomem *regs; > + int ref_clk_freq; > + int cpu_type; > +}; > + > +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) > + > +/* > + * Returns reference clock frequency selection value > + */ > +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) > +{ > + struct clk *ref_clk; > + int refclk_freq = 0; > + > + ref_clk = clk_get(sphy->dev, "xusbxti"); > + if (IS_ERR(ref_clk)) { > + dev_err(sphy->dev, "Failed to get reference clock\n"); > + return PTR_ERR(ref_clk); > + } > + > + switch (clk_get_rate(ref_clk)) { > + case 12 * MHZ: > + refclk_freq |= S3C_PHYCLK_CLKSEL_12M; > + break; > + case 24 * MHZ: > + refclk_freq |= S3C_PHYCLK_CLKSEL_24M; > + break; > + default: > + case 48 * MHZ: > + /* default reference clock */ > + refclk_freq |= S3C_PHYCLK_CLKSEL_48M; > + break; > + } > + clk_put(ref_clk); > + > + return refclk_freq; > +} > + > +static void samsung_usbphy_enable(struct samsung_usbphy *sphy) > +{ > + void __iomem *regs = sphy->regs; > + u32 phypwr; > + u32 phyclk; > + u32 rstcon; > + > + /* set clock frequency for PLL */ > + phyclk = sphy->ref_clk_freq; > + phypwr = readl(regs + S3C_PHYPWR); > + rstcon = readl(regs + S3C_RSTCON); > + > + switch (sphy->cpu_type) { > + case TYPE_S3C64XX: > + phyclk &= ~(S3C_PHYCLK_COMMON_ON_N); > + phypwr &= ~S3C_PHYPWR_NORMAL_MASK; > + rstcon |= S3C_RSTCON_PHY; > + break; > + case TYPE_EXYNOS4210: > + phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK; > + rstcon |= S3C_RSTCON_PHY; > + default: > + break; > + } > + > + writel(phyclk, regs + S3C_PHYCLK); > + /* set to normal of PHY0 */ > + writel(phypwr, regs + S3C_PHYPWR); > + /* reset all ports of PHY and Link */ > + writel(rstcon, regs + S3C_RSTCON); > + udelay(10); > + rstcon &= ~S3C_RSTCON_PHY; > + writel(rstcon, regs + S3C_RSTCON); > +} > + > +static void samsung_usbphy_disable(struct samsung_usbphy *sphy) > +{ > + void __iomem *regs = sphy->regs; > + u32 phypwr; > + > + phypwr = readl(regs + S3C_PHYPWR); > + > + switch (sphy->cpu_type) { > + case TYPE_S3C64XX: > + phypwr |= S3C_PHYPWR_NORMAL_MASK; > + break; > + case TYPE_EXYNOS4210: > + phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK; > + default: > + break; > + } > + > + /* unset to normal of PHY0 */ > + writel(phypwr, regs + S3C_PHYPWR); > +} > + > +/* > + * The function passed to the usb driver for phy initialization > + */ > +static int samsung_usbphy_init(struct usb_phy *phy) > +{ > + struct samsung_usbphy *sphy; > + int ret = 0; > + > + sphy = phy_to_sphy(phy); > + > + /* Enable the phy clock */ > + ret = clk_prepare_enable(sphy->clk); > + if (ret) { > + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); > + return ret; > + } > + > + /* Disable phy isolation */ > + if (sphy->plat && sphy->plat->pmu_isolation) > + sphy->plat->pmu_isolation(false); > + > + /* Initialize usb phy registers */ > + samsung_usbphy_enable(sphy); > + > + /* Disable the phy clock */ > + clk_disable_unprepare(sphy->clk); > + return ret; > +} > + > +/* > + * The function passed to the usb driver for phy shutdown > + */ > +static void samsung_usbphy_shutdown(struct usb_phy *phy) > +{ > + struct samsung_usbphy *sphy; > + > + sphy = phy_to_sphy(phy); > + > + if (clk_prepare_enable(sphy->clk)) { > + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); > + return; > + } > + > + /* De-initialize usb phy registers */ > + samsung_usbphy_disable(sphy); > + > + /* Enable phy isolation */ > + if (sphy->plat && sphy->plat->pmu_isolation) > + sphy->plat->pmu_isolation(true); > + > + clk_disable_unprepare(sphy->clk); > +} > + > +static const struct of_device_id samsung_usbphy_dt_match[]; > + > +static inline int samsung_usbphy_get_driver_data(struct platform_device > *pdev) > +{ > + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { > + int data; > + const struct of_device_id *match; > + match = of_match_node(samsung_usbphy_dt_match, > + pdev->dev.of_node); > + data = (int) match->data; > + return data; > + } > + > + return platform_get_device_id(pdev)->driver_data; > +} > + > +static int __devinit samsung_usbphy_probe(struct platform_device *pdev) > +{ > + struct samsung_usbphy *sphy; > + struct samsung_usbphy_data *pdata; > + struct device *dev = &pdev->dev; > + struct resource *phy_mem; > + void __iomem *phy_base; > + struct clk *clk; > + int ret; > + > + pdata = pdev->dev.platform_data; > + if (!pdata) { > + dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); > + return -EINVAL; > + } > + > + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!phy_mem) { > + dev_err(dev, "%s: missing mem resource\n", __func__); > + return -ENODEV; > + } > + > + phy_base = devm_request_and_ioremap(dev, phy_mem); > + if (!phy_base) { > + dev_err(dev, "%s: register mapping failed\n", __func__); > + return -ENXIO; > + } > + > + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); > + if (!sphy) > + return -ENOMEM; > + > + clk = devm_clk_get(dev, "otg"); > + if (IS_ERR(clk)) { > + dev_err(dev, "Failed to get otg clock\n"); > + return PTR_ERR(clk); > + } > + > + sphy->dev = &pdev->dev; > + sphy->plat = pdata; > + sphy->regs = phy_base; > + sphy->clk = clk; > + sphy->phy.dev = sphy->dev; > + sphy->phy.label = "samsung-usbphy"; > + sphy->phy.init = samsung_usbphy_init; > + sphy->phy.shutdown = samsung_usbphy_shutdown; > + sphy->cpu_type = samsung_usbphy_get_driver_data(pdev); > + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); > + > + ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); > + if (ret) > + goto err; > + > + platform_set_drvdata(pdev, sphy); > +err: > + return ret; > +} > + > +static int __exit samsung_usbphy_remove(struct platform_device *pdev) > +{ > + struct samsung_usbphy *sphy = platform_get_drvdata(pdev); > + > + usb_remove_phy(&sphy->phy); > + > + return 0; > +} > + > +#ifdef CONFIG_OF > +static const struct of_device_id samsung_usbphy_dt_match[] = { > + { > + .compatible = "samsung,s3c64xx-usbphy", > + .data = (void *)TYPE_S3C64XX, > + }, { > + .compatible = "samsung,exynos4210-usbphy", > + .data = (void *)TYPE_EXYNOS4210, > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); > +#else > +#define samsung_usbphy_dt_match NULL > +#endif > + > +static struct platform_device_id samsung_usbphy_driver_ids[] = { > + { > + .name = "s3c64xx-usbphy", > + .driver_data = TYPE_S3C64XX, > + }, { > + .name = "exynos4210-usbphy", > + .driver_data = TYPE_EXYNOS4210, > + }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); > + > +static struct platform_driver samsung_usbphy_driver = { > + .probe = samsung_usbphy_probe, > + .remove = __devexit_p(samsung_usbphy_remove), > + .id_table = samsung_usbphy_driver_ids, > + .driver = { > + .name = "samsung-usbphy", > + .owner = THIS_MODULE, > + .of_match_table = samsung_usbphy_dt_match, > + }, > +}; > + > +module_platform_driver(samsung_usbphy_driver); > + > +MODULE_DESCRIPTION("Samsung USB phy controller"); > +MODULE_AUTHOR("Praveen Paneri <p.paneri@xxxxxxxxxxx>"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("platform:samsung-usbphy"); > diff --git a/include/linux/platform_data/samsung-usbphy.h > b/include/linux/platform_data/samsung-usbphy.h > new file mode 100644 > index 0000000..1bd24cb > --- /dev/null > +++ b/include/linux/platform_data/samsung-usbphy.h > @@ -0,0 +1,27 @@ > +/* > + * Copyright (C) 2012 Samsung Electronics Co.Ltd > + * http://www.samsung.com/ > + * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx> > + * > + * Defines platform data for samsung usb phy driver. > + * > + * This program is free software; you can redistribute it and/or modify > it > + * under the terms of the GNU General Public License as published by > the > + * Free Software Foundation; either version 2 of the License, or (at > your > + * option) any later version. > + */ > + > +#ifndef __SAMSUNG_USBPHY_PLATFORM_H > +#define __SAMSUNG_USBPHY_PLATFORM_H > + > +/** > + * samsung_usbphy_data - Platform data for USB PHY driver. > + * @pmu_isolation: Function to control usb phy isolation in PMU. > + */ > +struct samsung_usbphy_data { > + void (*pmu_isolation)(int on); > +}; > + > +extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd); > + > +#endif /* __SAMSUNG_USBPHY_PLATFORM_H */ > -- > 1.7.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |