Re: [PATCH] ARM: dts: use uart2 for console on smdkv310 and smdk5250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20 September 2012 04:48, Kukjin Kim <kgene@xxxxxxxxxx> wrote:
> Thomas Abraham wrote:
>>
>> On 17 September 2012 17:16, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote:
>> >
>> > Cc: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
>> > Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>> > ---
>> >  arch/arm/boot/dts/exynos4210-smdkv310.dts |    2 +-
>> >  arch/arm/boot/dts/exynos5250-smdk5250.dts |    2 +-
>> >  2 files changed, 2 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts
>> b/arch/arm/boot/dts/exynos4210-smdkv310.dts
>> > index 1beccc8..cb01e3d 100644
>> > --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
>> > +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
>> > @@ -26,7 +26,7 @@
>> >         };
>> >
>> >         chosen {
>> > -               bootargs = "root=/dev/ram0 rw ramdisk=8192
>> initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
>> > +               bootargs = "root=/dev/ram0 rw ramdisk=8192
>> initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
>> >         };
>>
>> Dear Mr. Kim,
>>
>> What is the reason for changing the console port to 2 for smdkv310 board?
>>
> Since uart1 can be used for other purpose, we changed the default console
> port to use uart2 a few month ago for all of SMDKs. And if required, I will
> change it for current defconfigs.

Ok, thanks for the information.

Regards,
Thomas.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux