On Thu, Sep 6, 2012 at 11:23 AM, Thomas Abraham
<thomas.abraham@xxxxxxxxxx> wrote:
> Add optional support for i2c bus pin configuration using pinctrl interface
>
> Cc: Ben Dooks <ben-linux@xxxxxxxxx>
> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
(...)
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
(...)
> - else
> - if (s3c24xx_i2c_parse_dt_gpio(i2c))
> + } else if (!IS_ERR_OR_NULL(i2c->pctrl) &&
> + !IS_ERR_OR_NULL(i2c->pctrl_state)) {
You don't need to check i2c->pctrl here, just check i2c->pctrl_state.
If i2c->pctrl failed the other one will be null too, anyway.
(Or the struct isn't kzalloc:ed properly... which I assume.)
> + if (pinctrl_select_state(i2c->pctrl, i2c->pctrl_state)) {
> + dev_err(i2c->dev, "failed to configure io-pins\n");
> + return -ENXIO;
> + }
> + } else if (s3c24xx_i2c_parse_dt_gpio(i2c)) {
> return -EINVAL;
> + }
>
> /* write slave address */
>
> @@ -1013,6 +1022,10 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
> i2c->adap.algo_data = i2c;
> i2c->adap.dev.parent = &pdev->dev;
>
> + i2c->pctrl = devm_pinctrl_get(i2c->dev);
> + if (!IS_ERR_OR_NULL(i2c->pctrl))
> + i2c->pctrl_state = pinctrl_lookup_state(i2c->pctrl, "default");
> +
If all you do is select the default state (later, in the init function)
the use devm_pinctrl_get_select_default() and be done
with it.
In any case do not open code the string "default", use
PINCTRL_STATE_DEFAULT which defines to that string.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
