Sachin Kamat wrote:
>
> Commit: f447ed8b31d (gpio: samsung: add flags specifier to
> device-tree binding) adds a flag to represent active low state
> for gpio line. Since gpio-keys on Origen board are active low,
> using this flag to represent the same.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
> Reviewed-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos4210-origen.dts | 10 +++++-----
> 1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
> b/arch/arm/boot/dts/exynos4210-origen.dts
> index 0c49caa..c37edf0 100644
> --- a/arch/arm/boot/dts/exynos4210-origen.dts
> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
> @@ -62,31 +62,31 @@
>
> up {
> label = "Up";
> - gpios = <&gpx2 0 0 0 2>;
> + gpios = <&gpx2 0 0 0x10000 2>;
> linux,code = <103>;
> };
>
> down {
> label = "Down";
> - gpios = <&gpx2 1 0 0 2>;
> + gpios = <&gpx2 1 0 0x10000 2>;
> linux,code = <108>;
> };
>
> back {
> label = "Back";
> - gpios = <&gpx1 7 0 0 2>;
> + gpios = <&gpx1 7 0 0x10000 2>;
> linux,code = <158>;
> };
>
> home {
> label = "Home";
> - gpios = <&gpx1 6 0 0 2>;
> + gpios = <&gpx1 6 0 0x10000 2>;
> linux,code = <102>;
> };
>
> menu {
> label = "Menu";
> - gpios = <&gpx1 5 0 0 2>;
> + gpios = <&gpx1 5 0 0x10000 2>;
> linux,code = <139>;
> };
> };
> --
> 1.7.4.1
Applied, thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
