On 4 September 2012 14:20, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote: > This commit adds basic device tree for Exynos4210-based Trats board. > > Currently it provides support for eMMC over sdhci and MAX8997 PMIC. > > Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > --- > arch/arm/boot/dts/exynos4210-trats.dts | 237 +++++++++++++++++++++++++++++++++ > arch/arm/mach-exynos/Makefile.boot | 2 +- > 2 files changed, 238 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/exynos4210-trats.dts > > diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts > new file mode 100644 > index 0000000..73567b8 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4210-trats.dts > @@ -0,0 +1,237 @@ > +/* > + * Samsung's Exynos4210 based Trats board device tree source > + * > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Device tree source file for Samsung's Trats board which is based on > + * Samsung's Exynos4210 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +/include/ "exynos4210.dtsi" > + > +/ { > + model = "Samsung Trats based on Exynos4210"; > + compatible = "samsung,trats", "samsung,exynos4210"; > + > + memory { > + reg = <0x40000000 0x20000000 > + 0x60000000 0x20000000>; > + }; Why does this have to be split. Why not have a single entry with the size as 0x40000000? > + > + chosen { > + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; > + }; > + > + vemmc_reg: voltage-regulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "VMEM_VDD_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + gpio = <&gpk0 2 1 0 0>; > + enable-active-high; > + }; > + > + sdhci_emmc: sdhci@12510000 { > + bus-width = <8>; > + non-removable; > + broken-voltage; > + gpios = <&gpk0 0 2 0 3>, > + <&gpk0 1 2 0 3>, > + <&gpk0 3 2 2 3>, > + <&gpk0 4 2 2 3>, > + <&gpk0 5 2 2 3>, > + <&gpk0 6 2 2 3>, > + <&gpk1 3 3 3 3>, > + <&gpk1 4 3 3 3>, > + <&gpk1 5 3 3 3>, > + <&gpk1 6 3 3 3>; > + vmmc-supply = <&vemmc_reg>; > + status = "okay"; > + }; > + > + serial@13800000 { > + status = "okay"; > + }; > + > + serial@13810000 { > + status = "okay"; > + }; > + > + serial@13820000 { > + status = "okay"; > + }; > + > + serial@13830000 { > + status = "okay"; > + }; > + > + i2c@138B0000 { > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <100000>; > + gpios = <&gpb 6 3 3 0>, > + <&gpb 7 3 3 0>; > + status = "okay"; > + > + max8997_pmic@66 { > + compatible = "maxim,max8997-pmic"; > + > + reg = <0x66>; Probably, the interrupts can be listed when we have pinctrl driver merged in Samsung tree. > + > + max8997,pmic-buck1-uses-gpio-dvs; > + max8997,pmic-buck2-uses-gpio-dvs; > + max8997,pmic-buck5-uses-gpio-dvs; > + > + max8997,pmic-ignore-gpiodvs-side-effect; > + max8997,pmic-buck125-default-dvs-idx = <0>; > + > + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>, > + <&gpx0 6 1 0 0>, > + <&gpl0 0 1 0 0>; > + > + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, > + <1250000>, <1200000>, > + <1150000>, <1100000>, > + <1000000>, <950000>; > + > + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, > + <950000>, <900000>, > + <1100000>, <1000000>, > + <950000>, <900000>; > + > + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, > + <1200000>, <1200000>, > + <1200000>, <1200000>, > + <1200000>, <1200000>; > + > + regulators { > + valive_reg: LDO2 { > + regulator-name = "VALIVE_1.1V_C210"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + vusb_reg: LDO3 { > + regulator-name = "VUSB_1.1V_C210"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + }; > + > + vmipi_reg: LDO4 { > + regulator-name = "VMIPI_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vpda_reg: LDO6 { > + regulator-name = "VCC_1.8V_PDA"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vcam_reg: LDO7 { > + regulator-name = "CAM_ISP_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vusbdac_reg: LDO8 { > + regulator-name = "VUSB/VDAC_3.3V_C210"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vccpda_reg: LDO9 { > + regulator-name = "VCC_2.8V_PDA"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + vpll_reg: LDO10 { > + regulator-name = "VPLL_1.1V_C210"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + vcclcd_reg: LDO13 { > + regulator-name = "VCC_3.3V_LCD"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vlcd_reg: LDO15 { > + regulator-name = "VLCD_2.2V"; > + regulator-min-microvolt = <2200000>; > + regulator-max-microvolt = <2200000>; > + }; > + > + camsensor_reg: LDO16 { > + regulator-name = "CAM_SENSOR_IO_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddq_reg: LDO21 { > + regulator-name = "VDDQ_M1M2_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + varm_breg: BUCK1 { > + regulator-name = "VARM_1.2V_C210"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + vint_breg: BUCK2 { > + regulator-name = "VINT_1.1V_C210"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + camisp_breg: BUCK4 { > + regulator-name = "CAM_ISP_CORE_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + vmem_breg: BUCK5 { > + regulator-name = "VMEM_1.2V_C210"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + vccsub_breg: BUCK7 { > + regulator-name = "VCC_SUB_2.0V"; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2000000>; > + regulator-always-on; > + }; > + > + safe1_sreg: ESAFEOUT1 { > + regulator-name = "SAFEOUT1"; > + regulator-always-on; > + }; > + > + safe2_sreg: ESAFEOUT2 { > + regulator-name = "SAFEOUT2"; > + regulator-boot-on; > + }; > + }; > + }; > + }; > +}; > diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot > index 31bd181..a79d999 100644 > --- a/arch/arm/mach-exynos/Makefile.boot > +++ b/arch/arm/mach-exynos/Makefile.boot > @@ -1,5 +1,5 @@ > zreladdr-y += 0x40008000 > params_phys-y := 0x40000100 > > -dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb > +dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb exynos4210-trats.dtb > dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb > -- > 1.7.12 > Reviewed-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html