On 30 August 2012 14:18, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
> Hi Thomas,
>
> On 08/29/2012 07:48 PM, Thomas Abraham wrote:
>> Some platforms allow for clock gating and control of bus interface unit clock
>> and card interface unit clock. Add support for clock lookup of optional biu
>> and ciu clocks for clock gating and clock speed determination.
>>
>> Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
>> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
>> Acked-by: Will Newton <will.newton@xxxxxxxxxx>
>> ---
>> drivers/mmc/host/dw_mmc.c | 42 +++++++++++++++++++++++++++++++++++++++---
>> include/linux/mmc/dw_mmc.h | 4 ++++
>> 2 files changed, 43 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 227c42e..90c7c7b 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -1960,18 +1960,38 @@ int dw_mci_probe(struct dw_mci *host)
>> return -ENODEV;
>> }
>>
>> - if (!host->pdata->bus_hz) {
>> + host->biu_clk = clk_get(host->dev, "biu");
>> + if (IS_ERR(host->biu_clk))
>> + dev_dbg(host->dev, "biu clock not available\n");
>> + else
>> + clk_prepare_enable(host->biu_clk);
> biu is clock for bus interface?
> if didn't get "biu_clk" or didn't clk_prepare_enable(), then can we initialize the card?
Hi Jaehoon,
Yes, the biu clock is for bus interface. The biu and ciu clock lookup
and enable here is optional in the above change. If a platform does
not define these clocks, then the platform code is responsible for
enabling these clocks.
>> +
>> + host->ciu_clk = clk_get(host->dev, "ciu");
>> + if (IS_ERR(host->ciu_clk))
>> + dev_dbg(host->dev, "ciu clock not available\n");
>> + else
>> + clk_prepare_enable(host->ciu_clk);
>> +
>> + if (IS_ERR(host->ciu_clk))
>> + host->bus_hz = host->pdata->bus_hz;
>> + else
>> + host->bus_hz = clk_get_rate(host->ciu_clk);
> if clk_get_rate() is incorrect value(ex,400MHz),
> then mmc->f_min value is too high.
> because mmc->f_min is assigned to DIV_ROUND_UP(host->bus_hz, 510) into dw_mc_init_slot.
> Do you have any opinion for solving this?
One option on Exynos5250 is to use the clock divider in the CLKSEL
register to divide the ciu clock to a lower value. For Exynos4, since
there is no clock divider in CLKSEL register, the platform code should
ensure that the ciu clock has a valid range.
Thanks,
Thomas.
[...]
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
