On 28 August 2012 10:46, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
> On 08/28/2012 02:10 PM, Thomas Abraham wrote:
>> On 28 August 2012 10:40, Thomas Abraham <thomas.abraham@xxxxxxxxxx> wrote:
>>> On 28 August 2012 10:25, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
>>>> Hi Thomas,
>>>>
>>>> On 08/28/2012 01:48 PM, Thomas Abraham wrote:
>>>>> On 27 August 2012 14:28, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
>>>>>> Hi Thomas,
>>>>>>
>>>>>>> + gpio = of_get_named_gpio(slot_np, "wp-gpios", 0);
>>>>>>> + if (gpio_is_valid(gpio)) {
>>>>>>> + if (devm_gpio_request(host->dev, gpio, "dw-mci-wp"))
>>>>>>> + dev_info(host->dev, "gpio [%d] request failed\n",
>>>>>>> + gpio);
>>>>>>> + } else {
>>>>>>> + dev_info(host->dev, "wp gpio not available");
>>>>>>> + host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT;
>>>>>>> + }
>>>>>>> +
>>>>>>> + if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
>>>>>>> + return 0;
>>>>>>> +
>>>>>>> + gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
>>>>>>> + if (gpio_is_valid(gpio)) {
>>>>>>> + if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
>>>>>> I'm not sure, but i saw mmc_gpio_request_cd() into drivers/mmc/core/slot-gpio.c.
>>>>>> Can we use this? i think we can use them.
>>>>>> Just my opinion.
>>>>>
>>>>> Thanks for letting me know about this, I was not aware of this.
>>>>> Looking into this code, it is usable for controllers that use a gpio
>>>>> (specified using cd-gpios property) as card-detect line. As you know,
>>>>> the dw-mmc driver does not support this feature yet. In case of
>>>>> exynos, the card-detect pin of the mmc slot is connected to the
>>>>> card-detect pad of the dw-mmc controller using pinmux, which is not
>>>>> considered as a gpio. Hence, mmc_gpio_request_cd() is not applicable
>>>>> in this case.
>>>> But In case of external card-detect-pin, we can use the mmc_gpio_request_cd().
>>>
>>> Yes, we can use. But the current dw-mmc controller driver does not
>>> support this feature yet. The existing driver considers that (a)
>>> card-detect line is connected to the card-detect pad of the controller
>>> or (b) it is broken. For Exynos5250, it is case (a). There is no
>>
>> Sorry, I meant smdk5250, not Exynos5250.
> Already i tested with my exynos5 board.
> If you want, i will share the patch.
But did you use "samsung,cd-pinmux-gpio" binding or "cd-gpios" binding
for specifying the card-detect line. I think, for your board, you have
to use "cd-gpios". But this patch series does not add support for
"cd-gpios".
Sure, I will like to have a look at your patch and understand more.
Thanks,
Thomas.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
