Hi Tomasz, On 08/12/2012 12:22 AM, Tomasz Figa wrote: > On Saturday 11 of August 2012 21:32:15 Sylwester Nawrocki wrote: >> On 08/11/2012 08:39 PM, Tomasz Figa wrote: >>> Hi, >>> >>> On Saturday 11 of August 2012 20:06:13 Sylwester Nawrocki wrote: >>>> Hi all, >>>> >>>> This patch adds a driver for Samsung S3C244X/S3C64XX SoC series camera >>>> host interface. My intention was to create a V4L2 driver that would >>>> work >>>> with standard applications like Gstreamer or mplayer, and yet exposing >>>> possibly all features available in the hardware. >>>> >>>> It took me several weeks to do this work in my (limited) spare time. >>>> Finally I've got something that is functional and I think might be >>>> useful for others, so I'm publishing this initial version. It >>>> hopefully doesn't need much tweaking or corrections, at least as far >>>> as S3C244X is concerned. It has not been tested on S3C64XX SoCs, as I >>>> don't have the hardware. However, the driver has been designed with >>>> covering S3C64XX as well in mind, and I've already taken care of some >>>> differences between S3C2444X and S3C64XX. Mem-to-mem features are not >>>> yet supported, but these are quite separate issue and could be easily >>>> added as a next step.> >>> I will try to test it on S3C6410 in some reasonably near future and >>> report any needed corrections. >> >> Sounds great, thanks. > > I have not tested the driver yet, but I am looking through the code and it > seems like S3C6410 (at least according to the documentation) supports far > more pixel formats than defined in the driver. > > Both preview and scaler paths are supposed to support 420/422 planar, 422 > interleaved and 565/666/888 formats. Indeed, somehow I missed that s3c64xx supports most of the pixel formats on both: the preview and the codec data paths. I've updated the pixel format definitions to reflect that, but it still needs to be verified with proper tests. I just didn't add YUV422 packed format, I expect it to be done by someone who actually verifies that it works, after checking/updating camif-regs.c as well. > Also two distinct planar 420 formats exist that simply differ by plane > order YUV420 (currently supported in your driver) and YVU420 (with Cb and > Cr planes swapped). It should be pretty straightforward to add support for > the latter. Yeah, thanks for the suggestion. I've added support for YVU420 - it yields more options where setting up gstreamer pipelines, along with a few fixes for issues I've found after some more testing, including LKM build. It can be pulled from following git tree: git://linuxtv.org/snawrocki/media.git s3c-camif-devel It's based off of staging/for_v3.7 branch (3.6-rc3). I consider it more or less stable. The final branch for mainline is 's3c-camif', the difference is only that the fixes were squashed to a single commit adding the whole driver there. -- Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |