SPI is also connected on the board, use that instead of I2C as it's much faster. Also define platform data now the core driver is in mainline. Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 35 ++++++++++++++++++++++---- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index f81f089..22dd77b 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -192,9 +192,33 @@ static const struct i2c_board_info wm1277_devs[] = { }, }; -static const struct i2c_board_info wm5102_devs[] = { - { I2C_BOARD_INFO("wm5102", 0x1a), - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, +static struct arizona_pdata wm5102_pdata = { + .ldoena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .irq_active_high = true, + .micd_pol_gpio = CODEC_GPIO_BASE + 4, + .gpio_defaults = { + [2] = 0x10000, /* AIF3TXLRCLK */ + [3] = 0x4, /* OPCLK */ + }, +}; + +static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = { + .line = S3C64XX_GPN(5), +}; + +static struct spi_board_info wm5102_spi_devs[] = { + [0] = { + .modalias = "wm5102", + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + + WM831X_IRQ_GPIO_2, + .controller_data = &wm5102_spi_csinfo, + .platform_data = &wm5102_pdata, + }, }; static const struct i2c_board_info wm6230_i2c_devs[] = { @@ -234,8 +258,9 @@ static __devinitdata const struct { { .id = 0x3c, .name = "1273-EV1 Longmorn" }, { .id = 0x3d, .name = "1277-EV1 Littlemill", .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, - { .id = 0x3e, .name = "WM5102-6271-EV1-CS127", - .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) }, + { .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut", + .spi_devs = wm5102_spi_devs, + .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html