On 07/24/2012 08:55 AM, Jingoo Han wrote:
On Tuesday, July 24, 2012 8:46 AM, Joonyoung Shim Wrote:
On 07/24/2012 08:14 AM, Jingoo Han wrote:
On Monday, July 23, 2012 6:55 PM, Joonyoung Shim wrote:
Hi, Jingoo.
On 07/23/2012 05:34 PM, Joonyoung Shim wrote:
On 07/18/2012 02:57 PM, Leela Krishna Amudala wrote:
This patch adds the bus clock for FIMD and changes
the device name for lcd clock
Please refer below patch for exynos4.
http://lists.linaro.org/pipermail/linaro-dev/2011-December/008872.html
Signed-off-by: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
---
arch/arm/mach-exynos/clock-exynos5.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-exynos/clock-exynos5.c
b/arch/arm/mach-exynos/clock-exynos5.c
index 774533c..f001876 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -634,6 +634,11 @@ static struct clk exynos5_init_clocks_off[] = {
.enable = exynos5_clk_ip_disp1_ctrl,
.ctrlbit = (1 << 3),
}, {
+ .name = "fimd",
+ .devname = "exynos5-fb",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
With this patch, it causes below error at the DP driver because fimd
clock is disabled.
[ 0.210000] exynos-dp exynos-dp: Timeout of video streamclk ok
[ 0.210000] exynos-dp exynos-dp: unable to config video
[ 0.210000] exynos-dp: probe of exynos-dp failed with error -110
I wonder fimd clock has any dependency with DP
FIMD pixel clock is necessary to enable DP.
So then, i think DP driver also should control FIMD pixel clock.
Do you have any patch or plan for it?
Um, I don't think so.
Because, DP cannot work by itself.
In order to use DP, FIMD should be enabled.
If FIMD is enabled, FIMD pixel clock is enabled;
therefore, DP driver does not need to control FIMD pixel clock.
Why does DP driver have FIMD driver dependency? Also for this, it needs
FIMD driver is probed earlier then DP driver. We cannot decide driver
probe order if they are same level drivers and itself is weird
condition. Although there is hardware dependency, DP and FIMD driver
don't have any code relations. They are each other drivers. But DP
needs FIMD pixel clock and because the clock can be control at the
several drivers and the clock framework exists for that, then i think
it's better DP driver also control FIMD pixel clock.
In my opinion, adding config dependency would be better, such as FB_S3C or DRM_EXYNOS_FIMD.
I think this is not solution. How do you ensure FIMD driver is probed
earlier than DP driver? Even if it's possible, when FIMD driver only
controls pixel clock, DP driver will execute any operations regardless
status of FIMD pixel clock, so if FIMD driver turns off pixel clock,
then DP will occur any error.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
