Changes from v1: EXYNOS4: USB: Generalising setup-usb-phy driver for exynos 1) Make function exynos_usb_clock_enable() as static. 2) Remove the check for 'usb_clk' in exynos_usb_clock_enable(). ARM: EXYNOS5: Add PHY initialization code for usb 2.0 1) Set HOST_CTRL0_COMMONON_N and reset OTG_SYS_COMMON_ON bits for host and otg power saving in suspend mode. Ajay Kumar (2): ARM: EXYNOS5: Add machine data for USB 2.0 ARM: EXYNOS5: Add OHCI device from device tree Vivek Gautam (6): EXYNOS4: USB: Generalising setup-usb-phy driver for exynos ARM: EXYNOS5: Add EHCI device from device tree ARM: EXYNOS5: Add PHY initialization code for usb 2.0 ARM: EXYNOS5: Add machine data for USB3.0 ARM: EXYNOS5: Add XHCI device from device tree ARM: EXYNOS5: Add PHY initialization code for usb 3.0 .../devicetree/bindings/usb/exynos-usb.txt | 60 +++ arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 + arch/arm/boot/dts/exynos5250.dtsi | 18 + arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-exynos/clock-exynos5.c | 24 ++ arch/arm/mach-exynos/common.c | 10 + arch/arm/mach-exynos/include/mach/map.h | 3 + arch/arm/mach-exynos/include/mach/regs-pmu.h | 4 + arch/arm/mach-exynos/include/mach/regs-usb-phy.h | 86 ++++ arch/arm/mach-exynos/mach-exynos5-dt.c | 26 ++ arch/arm/mach-exynos/setup-usb-phy.c | 411 ++++++++++++++++++-- arch/arm/plat-samsung/include/plat/map-s5p.h | 2 + .../include/plat/regs-usb3-exynos-drd-phy.h | 75 ++++ arch/arm/plat-samsung/include/plat/usb-phy.h | 1 + drivers/usb/Kconfig | 1 + 15 files changed, 693 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/exynos-usb.txt create mode 100644 arch/arm/plat-samsung/include/plat/regs-usb3-exynos-drd-phy.h -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |