This patch adds EHCI device from device tree for exynos5 and adds platform data. Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 45dadca..b2349fe 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -39,3 +39,22 @@ ehci { samsung,vbus-gpio = <&gpx2 6 1 3 3>; }; +XHCI +Required properties: + - compatible: should be "samsung,exynos-xhci" for USB 3.0 + DWC3 controller in host mode. + - reg: physical base address of the controller and length + of memory mapped. + - interrupts: interrupt number to the cpu. + - samsung,vbus-gpio: if present, specifies the GPIO + that needs to be pulled up for the bus to be powered. + +Optional properties: + - samsung,vbus-gpio: if present, specifies the GPIO + that needs to be pulled up for the bus to be powered. + +xhci { + compatible = "samsung,exynos-xhci"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; +}; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 988f52a..bc36584 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -70,6 +70,12 @@ interrupts = <0 71 0>; }; + xhci { + compatible = "samsung,exynos-xhci"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + }; + rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 0cc626e..fc1ed3f 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -10,6 +10,7 @@ */ #include <linux/of_platform.h> +#include <linux/platform_data/dwc3-exynos.h> #include <linux/serial_core.h> #include <asm/mach/arch.h> @@ -34,6 +35,12 @@ static struct s5p_ehci_platdata smdk5250_ehci_pdata = { .phy_exit = s5p_usb_phy_exit, }; +static struct dwc3_exynos_data smdk5250_xhci_pdata = { + .phy_type = S5P_USB_PHY_DRD, + .phy_init = s5p_usb_phy_init, + .phy_exit = s5p_usb_phy_exit, +}; + /* * The following lookup table is used to override device names when devices * are registered from device tree. This is temporarily added to enable @@ -73,6 +80,8 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos-ohci", &smdk5250_ohci_pdata), OF_DEV_AUXDATA("samsung,exynos-ehci", 0x12110000, "s5p-ehci", &smdk5250_ehci_pdata), + OF_DEV_AUXDATA("samsung,exynos-xhci", 0x12000000, + "exynos-dwc3", &smdk5250_xhci_pdata), {}, }; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html