There is no need now for individual GPIO port J pin control bit definitions, the GPIO0..12 pins can be configured using the gpiolib API. The GPJ* register address offset definitions for S3C2413 are moved to the common mach-s3c24xx/include/mach/regs-gpio.h header. These are still used outside of the gpio-samsung driver by PM code. Switching GPJ port to camera function can be done for example with: s3c_gpio_cfgall_range(S3C2410_GPJ(0), 13, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx> --- arch/arm/mach-s3c24xx/include/mach/regs-gpio.h | 17 +++++- arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h | 70 ----------------------- arch/arm/mach-s3c24xx/mach-gta02.c | 1 - arch/arm/mach-s3c24xx/mach-rx1950.c | 1 - arch/arm/mach-s3c24xx/pm-s3c2412.c | 1 - arch/arm/mach-s3c24xx/s3c2412.c | 1 - arch/arm/mach-s3c24xx/s3c244x.c | 1 - 7 files changed, 15 insertions(+), 77 deletions(-) delete mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index cac1ad6..a11a638 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -302,7 +302,7 @@ /* S3C2410: * Port G consists of 8 GPIO/IRQ/Special function * - * GPGCON has 2 bits for each of the input pins on port F + * GPGCON has 2 bits for each of the input pins on port G * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -366,7 +366,7 @@ /* Port H consists of11 GPIO/serial/Misc pins * - * GPGCON has 2 bits for each of the input pins on port F + * GPHCON has 2 bits for each of the input pins on port H * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -427,6 +427,19 @@ * for the 2412/2413 from the 2410/2440/2442 */ +/* + * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits + * for each of the pins on port J. + * 00 - input, 01 output, 10 - camera + * + * Pull up works like all other ports. + */ + +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + /* S3C2443 and above */ #define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) #define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h deleted file mode 100644 index 19575e0..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics <linux@xxxxxxxxxxxx> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 0f29f64..92e1f93 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -71,7 +71,6 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/fb.h> #include <plat/usb-control.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index a6762aa..7ee73f2 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -42,7 +42,6 @@ #include <asm/mach-types.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-lcd.h> #include <mach/h1940.h> #include <mach/fb.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d045885..c60f67a 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <mach/regs-power.h> -#include <mach/regs-gpioj.h> #include <mach/regs-gpio.h> #include <mach/regs-dsc.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index d4bc7f9..6c5f403 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -39,7 +39,6 @@ #include <plat/regs-serial.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/regs-spi.h> #include <mach/regs-s3c2412.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 6f74118..b0b60a1 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -36,7 +36,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/s3c2410.h> -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |