Replace SoC specific GPIO functions with the gpiolib API. The LED gpio is freed right after it is configured so it can be acquired in the s3c24xx_led driver. This change is required for converting the s3c24xx_led driver to the gpiolib API. Cc: laforge@xxxxxxxxxxxx Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx> --- This change was only compile tested. If there is someone still using this board please provide a "Tested-by" tag. --- arch/arm/mach-s3c24xx/mach-qt2410.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b868ddd..678bbca 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -47,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/regs-gpio.h> #include <mach/leds-gpio.h> #include <mach/regs-lcd.h> #include <plat/regs-serial.h> @@ -325,8 +324,9 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(0), 1); + /* set initial state of the LED GPIO */ + WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPB(0)); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |