Sachin Kamat wrote:
>
> Adds S3C-HSOTG support to SMDKV210 board.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
> ---
> Based on Kukjin's tree - v3.5-for-usb-2 branch
> ---
> arch/arm/mach-s5pv210/Kconfig | 2 ++
> arch/arm/mach-s5pv210/mach-smdkv210.c | 9 +++++++++
> 2 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index 88e983b..77185c3 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -152,6 +152,7 @@ config MACH_SMDKV210
> select S3C_DEV_I2C1
> select S3C_DEV_I2C2
> select S3C_DEV_RTC
> + select S3C_DEV_USB_HSOTG
> select S3C_DEV_WDT
> select S5P_DEV_FIMC0
> select S5P_DEV_FIMC1
> @@ -170,6 +171,7 @@ config MACH_SMDKV210
> select S5PV210_SETUP_IDE
> select S5PV210_SETUP_KEYPAD
> select S5PV210_SETUP_SDHCI
> + select S5PV210_SETUP_USB_PHY
> help
> Machine support for Samsung SMDKV210
>
> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-
> s5pv210/mach-smdkv210.c
> index 91d4ad8..c7a6e49 100644
> --- a/arch/arm/mach-s5pv210/mach-smdkv210.c
> +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
> @@ -19,6 +19,7 @@
> #include <linux/gpio.h>
> #include <linux/delay.h>
> #include <linux/pwm_backlight.h>
> +#include <linux/platform_data/s3c-hsotg.h>
>
> #include <asm/hardware/vic.h>
> #include <asm/mach/arch.h>
> @@ -47,6 +48,7 @@
> #include <plat/backlight.h>
> #include <plat/regs-fb-v4.h>
> #include <plat/mfc.h>
> +#include <plat/clock.h>
>
> #include "common.h"
>
> @@ -210,6 +212,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata
> __initdata = {
> .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
> };
>
> +/* USB OTG */
> +static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
> +
> static struct platform_device *smdkv210_devices[] __initdata = {
> &s3c_device_adc,
> &s3c_device_cfcon,
> @@ -223,6 +228,7 @@ static struct platform_device *smdkv210_devices[]
> __initdata = {
> &s3c_device_i2c2,
> &s3c_device_rtc,
> &s3c_device_ts,
> + &s3c_device_usb_hsotg,
> &s3c_device_wdt,
> &s5p_device_fimc0,
> &s5p_device_fimc1,
> @@ -321,6 +327,9 @@ static void __init smdkv210_machine_init(void)
>
> samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
>
> + s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
> + clk_xusbxti.rate = 24000000;
> +
> platform_add_devices(smdkv210_devices,
> ARRAY_SIZE(smdkv210_devices));
> }
>
> --
> 1.7.4.1
Applied, thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
