Sachin Kamat wrote: > > S3C-HSOTG support is added to SMDK4212 and SMDK4412 boards. > > Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx> > --- > arch/arm/mach-exynos/Kconfig | 2 ++ > arch/arm/mach-exynos/mach-smdk4x12.c | 8 ++++++++ > 2 files changed, 10 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 6682f35..95e3ee3 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -349,6 +349,7 @@ config MACH_SMDK4212 > select S3C_DEV_I2C3 > select S3C_DEV_I2C7 > select S3C_DEV_RTC > + select S3C_DEV_USB_HSOTG > select S3C_DEV_WDT > select SAMSUNG_DEV_BACKLIGHT > select SAMSUNG_DEV_KEYPAD > @@ -359,6 +360,7 @@ config MACH_SMDK4212 > select EXYNOS4_SETUP_I2C7 > select EXYNOS4_SETUP_KEYPAD > select EXYNOS4_SETUP_SDHCI > + select EXYNOS4_SETUP_USB_PHY > help > Machine support for Samsung SMDK4212 > > diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach- > exynos/mach-smdk4x12.c > index d00e4f0..6d8f325 100644 > --- a/arch/arm/mach-exynos/mach-smdk4x12.c > +++ b/arch/arm/mach-exynos/mach-smdk4x12.c > @@ -19,6 +19,7 @@ > #include <linux/pwm_backlight.h> > #include <linux/regulator/machine.h> > #include <linux/serial_core.h> > +#include <linux/platform_data/s3c-hsotg.h> > > #include <asm/mach/arch.h> > #include <asm/hardware/gic.h> > @@ -235,6 +236,9 @@ static struct samsung_keypad_platdata > smdk4x12_keypad_data __initdata = { > .cols = 5, > }; > > +/* USB OTG */ > +static struct s3c_hsotg_plat smdk4x12_hsotg_pdata; > + > static struct platform_device *smdk4x12_devices[] __initdata = { > &s3c_device_hsmmc2, > &s3c_device_hsmmc3, > @@ -243,6 +247,7 @@ static struct platform_device *smdk4x12_devices[] > __initdata = { > &s3c_device_i2c3, > &s3c_device_i2c7, > &s3c_device_rtc, > + &s3c_device_usb_hsotg, > &s3c_device_wdt, > &samsung_device_keypad, > }; > @@ -281,6 +286,9 @@ static void __init smdk4x12_machine_init(void) > s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); > s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); > > + s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata); > + clk_xusbxti.rate = 24000000; Well, already clk_xusbxti.rate is declared at the same file? 257 static void __init smdk4x12_map_io(void) 258 { 259 clk_xusbxti.rate = 24000000; 260 Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html