Hi,
On Tue, May 1, 2012 at 10:07 PM, Thomas Abraham
<thomas.abraham@xxxxxxxxxx> wrote:
> Add device tree based discovery support.
>
> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
> ---
> .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 85 +++++++++
> drivers/mmc/host/dw_mmc-pltfm.c | 24 +++
> drivers/mmc/host/dw_mmc.c | 181 +++++++++++++++++++-
> drivers/mmc/host/dw_mmc.h | 10 +
> include/linux/mmc/dw_mmc.h | 2 +
> 5 files changed, 296 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> new file mode 100644
> index 0000000..c1ed70e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> @@ -0,0 +1,85 @@
> +* Synopsis Designware Mobile Storage Host Controller
> +
> +The Synopsis designware mobile storage host controller is used to interface
> +a SoC with storage medium such as eMMC or SD/MMC cards.
> +
> +Required Properties:
> +
> +* compatible: should be one of the following
> + - synopsis,dw-mshc: for controllers compliant with synopsis dw-mshc.
> +
> +* reg: physical base address of the dw-mshc controller and size of its memory
> + region.
> +
> +* interrupts: interrupt specifier for the controller. The format and value of
> + the interrupt specifier depends on the interrupt parent for the controller.
> +
> +# Slots: The slot specific information are contained within child-nodes with
> + each child-node representing a supported slot. There should be atleast one
> + child node representing a card slot. The name of the slot child node should
> + be 'slot{n}' where n is the unique number of the slot connnected to the
> + controller. The following are optional properties which can be included in
> + the slot child node.
Since we're talking slots / cards on a bus, I think the addressing
model would be useful here. So in the main controller node:
#address-cells = <1>;
#size-cells = <0>;
And then each slot would need a reg property and possibly unit address:
slot {
reg = <0>;
...
};
(unit addresses on the slots are only needed if they can't be
disambiguated by name, so not needed if you only have one slot).
-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
