Hi Sachin,
On 04/24/2012 12:38 PM, Sachin Kamat wrote:
> From: Ajay Kumar<ajaykumar.rs@xxxxxxxxxxx>
>
> Modify the G2D driver(which initially supported only FIMG2D v3 style H/W)
> to support FIMG2D v4.1 style hardware present on Exynos4x12 and Exynos52x0 SOC.
>
> -- Set the SRC and DST type to 'memory' instead of using reset values.
> -- FIMG2D v4.1 H/W uses different logic for stretching(scaling).
> -- Use CACHECTL_REG only with FIMG2D v3.
>
> Signed-off-by: Ajay Kumar<ajaykumar.rs@xxxxxxxxxxx>
> Signed-off-by: Sachin Kamat<sachin.kamat@xxxxxxxxxx>
> ---
> drivers/media/video/s5p-g2d/g2d-hw.c | 17 +++++++++++++----
> drivers/media/video/s5p-g2d/g2d-regs.h | 6 ++++++
> drivers/media/video/s5p-g2d/g2d.c | 23 +++++++++++++++++++++--
> drivers/media/video/s5p-g2d/g2d.h | 9 ++++++++-
> 4 files changed, 48 insertions(+), 7 deletions(-)
>
...
> @@ -783,6 +788,8 @@ static int g2d_probe(struct platform_device *pdev)
>
> def_frame.stride = (def_frame.width * def_frame.fmt->depth)>> 3;
>
> + dev->device_type = platform_get_device_id(pdev)->driver_data;
> +
> return 0;
>
> unreg_video_dev:
> @@ -832,9 +839,21 @@ static int g2d_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static struct platform_device_id g2d_driver_ids[] = {
> + {
> + .name = "s5p-g2d",
> + .driver_data = TYPE_G2D_3X,
IMHO it would be better to define a separate data structure describing
the quirks. For an example please see http://patchwork.linuxtv.org/patch/10869
and the code using struct flite_variant. There was some lengthy
discussion recently on linux-i2c mailing list, where someone tried
to add more quirks to the i2c-s3c2440 driver which uses 'driver_data'
like it is done in this patch. To avoid wasting time in future,
I would suggest to make 'driver_data' right away holding a pointer
to a data structure, rather than simple integer.
We could start, for example, with something like:
struct g2d_variant {
unsigned short hw_rev;
};
> + }, {
> + .name = "s5p-g2d41x",
> + .driver_data = TYPE_G2D_41X,
> + }, { },
How about marking the last empty entry e.g.
{ /* sentinel */ }
? Or just putting it in new line ?
> +};
> +MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
Hmm, should be g2d_driver_ids. This isn't going to fly when you
compile this driver as a module. You would get an error like:
error: ‘__mod_platform_device_table’ aliased to undefined symbol ‘s3c24xx_driver_ids’
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
