[@jassi: I know that you do not work at this stuff any longer, but I included
you in the list of recipients in the hope that you might be able to give me a
pointer on where to look for the culprit of the problem :-) ]
Hi,
while working on the beginnings of a wireless driver connected via SPI [1],
the s3c64xx-spi-driver produced strange problems while doing MODE_3 (CPOL |
CPHA) transfers: [2]
[write] spi cur_bpw: 8: 0x00 0x00 0x04 0x00
[read] spi cur_bpw: 8: 0x00 0x00 0x00 0x00
[read] spi cur_bpw: 8: 0x00 0x00 0x00 0x00
(chip_id = 0x0000, chip_rev = 0x00)
mapped channel 24 to 0
mapped channel 23 to 1
[write] spi cur_bpw: 8: 0x00 0x00 0x04 0x00
[read] spi cur_bpw: 8: 0x00 0x00 0x00 0x00
[read] spi cur_bpw: 8: 0x00 0x00 0x00 0x00
CIR: 0
[write] spi cur_bpw: 8: 0x00 0x00 0x04 0x00
[read] spi cur_bpw: 8: 0x00 0x00 0x00 0x00
mt592x_spi spi0.0: I/O Error: rx-1 tx-0 res:rx-f tx-p len-4
CIR: 0
[write] spi cur_bpw: 8: 0x00 0x00 0x04 0x00
mt592x_spi spi0.0: I/O Error: rx-0 tx-1 res:rx-p tx-f len-4
CIR: 0
[write] spi cur_bpw: 8: 0x00 0x00 0x04 0x00
mt592x_spi spi0.0: I/O Error: rx-0 tx-1 res:rx-p tx-f len-4
CIR: 0
[write] spi cur_bpw: 8: 0x00 0x00 0x04 0x00
mt592x_spi spi0.0: I/O Error: rx-0 tx-1 res:rx-p tx-f len-4
CIR: 0
where the expected result would be:
[write] spi cur_bpw: 8: 0x00 0x00 0x04 0x00
[read] spi cur_bpw: 8: 0x00 0x00 0x00 0x00
[read] spi cur_bpw: 8: 0x21 0x59 0x91 0x00
The pattern of either empty results or read errors also varies with each
invocation, i.e. sometimes all fail or all result in wrong values and so on.
In contrast when doing this with the spi-gpio driver, everything works as
expected and I get the expected results.
Also the device-family I'm working on contains a variant with a Marvell 8686
wlan chip [= the rest of the system is the same]. Using the spi-s3c64xx with
the libertas driver (MODE_0) works as expected.
As I'm not sure where I should look for errors in the driver, I would be glad
to get pointers in the right direction.
Thanks
Heiko
[1] a MediaTek MT5921
[2] the ouput is a simple
printk("spi cur_bpw: %d: ", sdd->cur_bpw);
for(tmp = 0; tmp < xfer->len; tmp++)
printk(" 0x%02x", ((u8 *)xfer->tx_buf)[tmp]);
printk("\n");
same for rxbuf
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
