Add device tree based discovery support for Samsung's display controller
framebuffer driver.
Cc: Jingoo Han <jg1.han@xxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
---
.../devicetree/bindings/fb/samsung-fb.txt | 148 +++++++++++++
drivers/video/s3c-fb.c | 230 +++++++++++++++++++-
2 files changed, 370 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fb/samsung-fb.txt
diff --git a/Documentation/devicetree/bindings/fb/samsung-fb.txt b/Documentation/devicetree/bindings/fb/samsung-fb.txt
new file mode 100644
index 0000000..612bd9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/samsung-fb.txt
@@ -0,0 +1,148 @@
+* Samsung Display Controller Framebuffer Controller
+
+The display controller is used to transfer image data from memory to a
+external display device such as an RGB interface LCD panel. It supports
+various color formats such as rgb and yuv. It also supports multiple window
+overlays.
+
+Required properties:
+
+ - compatible: should be one of the following
+ - samsung,exynos4210-fimd: for fimd compatible with Exynos4210 fimd
+ - samsung,s5pv210-fimd: for fimd compatible with s5pv210 fimd
+
+ - reg: physical base address of the controller and length of memory
+ mapped region.
+
+ - interrupts: Three interrupts should be specified. The format of the
+ interrupt specifier depends on the interrupt controller. The interrupts
+ should be specified in the following order.
+ - VSYNC (Video Frame) interrupt
+ - Video FIFO level interrupt
+ - FIMD System Interrupt
+
+ - gpios: The gpios used to interface with the external LCD panel. For a
+ panel with rgb interface, the gpio interface consists of video data
+ lines, HSYNC, VSYNC, Pixel Clock and Data Enable. The gpio's used for
+ these interface lines can be listed under this property in any order.
+
+ - samsung,fimd-display: The fimd controller is interfaced with the a
+ display device such as a lcd panel. This property should specify the
+ phandle of the display device node. For a display device node that
+ represents a RGB type display interface, it is expected to specify the
+ video interface timing using the following properties.
+
+ - lcd-htiming: Specifies the horizontal timing for the overlay. The
+ horizontal timing includes four parameters in the following order.
+
+ - horizontal back porch (in number of lcd clocks)
+ - horizontal front porch (in number of lcd clocks)
+ - hsync pulse width (in number of lcd clocks)
+ - Display panels X resolution.
+
+ - lcd-vtiming: Specifies the vertical timing for the overlay. The
+ vertical timing includes four parameters in the following order.
+
+ - vertical back porch (in number of lcd lines)
+ - vertical front porch (in number of lcd lines)
+ - vsync pulse width (in number of lcd clocks)
+ - Y resolution.
+
+ - Overlay/Windows: Multiple overlays/windows can be specified as child
+ nodes. Each window should have the following properties (optional
+ window properties are marked as 'optional').
+
+ - samsung,fimd-win-id: Specifies the window number of the fimd controller.
+
+ - samsung,fimd-win-bpp: Specifies the bits per pixel. Two values should
+ be specified in the following order.
+ - default-bpp: bpp supported by the overlay.
+ - max-bpp: maximum required bpp for the overlay.
+
+ - samsung,fimd-win-res: (OPTIONAL) Specifies the window resolution in
+ pixels. The resolution contains the X and Y pixel values with X being
+ specified first. If this property is not specified, the window
+ resolution is set to be equal to the display panel resolution.
+
+ - samsung,fimd-win-virtres: (OPTIONAL) Specifies the resolution of the
+ virtual frame buffer for the window. The resolution contains the X
+ and Y resolution in pixels with value of X being the specified first.
+
+Optional properties:
+
+ - samsung,fimd-vidout-rgb: Video output format is RGB.
+ - samsung,fimd-inv-hsync: invert hsync pulse polarity.
+ - samsung,fimd-inv-vsync: invert vsync pulse polarity.
+ - samsung,fimd-inv-vclk: invert video clock polarity.
+ - samsung,fimd-inv-vden: invert video enable signal polarity.
+ - samsung,fimd-frame-rate: Number of video frames per second.
+
+Example:
+
+ The following is an example for the fimd framebuffer controller is split
+ into two portions. The SoC specific portion can be specified in the SoC
+ specific dts file. The board specific portion can be specified in the
+ board specific dts file.
+
+ - SoC Specific portion
+
+ fimd@11C00000 {
+ compatible = "samsung,exynos4210-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x11C00000 0x8000>;
+ interrupts = <11 1>, <11 0>, <11 2>;
+ };
+
+ - Board Specific portion
+
+ fimd@11C00000 {
+ samsung,fimd-display = <&lcd_fimd0>;
+ samsung,fimd-vidout-rgb;
+ samsung,fimd-inv-hsync;
+ samsung,fimd-inv-vsync;
+ samsung,fimd-inv-vclk;
+ samsung,fimd-frame-rate = <60>;
+
+ gpios = <&gpf0 0 2 0 0>,
+ <&gpf0 1 2 0 0>,
+ <&gpf0 2 2 0 0>,
+ <&gpf0 3 2 0 0>,
+ <&gpf0 4 2 0 0>,
+ <&gpf0 5 2 0 0>,
+ <&gpf0 6 2 0 0>,
+ <&gpf0 7 2 0 0>,
+ <&gpf1 0 2 0 0>,
+ <&gpf1 1 2 0 0>,
+ <&gpf1 2 2 0 0>,
+ <&gpf1 3 2 0 0>,
+ <&gpf1 4 2 0 0>,
+ <&gpf1 5 2 0 0>,
+ <&gpf1 6 2 0 0>,
+ <&gpf1 7 2 0 0>,
+ <&gpf2 0 2 0 0>,
+ <&gpf2 1 2 0 0>,
+ <&gpf2 2 2 0 0>,
+ <&gpf2 3 2 0 0>,
+ <&gpf2 4 2 0 0>,
+ <&gpf2 5 2 0 0>,
+ <&gpf2 6 2 0 0>,
+ <&gpf2 7 2 0 0>,
+ <&gpf3 0 2 0 0>,
+ <&gpf3 1 2 0 0>,
+ <&gpf3 2 2 0 0>,
+ <&gpf3 3 2 0 0>;
+
+ window0 {
+ samsung,fimd-win-id = <0>;
+ samsung,fimd-win-bpp = <32 24>;
+ samsung,fimd-win-res = <512 300>;
+ samsung,fimd-win-vres = <1024 600>;
+ };
+
+ window1 {
+ samsung,fimd-win-id = <1>;
+ samsung,fimd-win-bpp = <32 24>;
+ samsung,fimd-win-res = <1024 200>;
+ samsung,fimd-win-vres = <1024 600>;
+ };
+ };
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 18c84b8..b8be668 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -24,6 +24,8 @@
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <mach/map.h>
#include <plat/regs-fb-v4.h>
@@ -220,6 +222,7 @@ struct s3c_fb {
int irq_no;
unsigned long irq_flags;
struct s3c_fb_vsync vsync_info;
+ int *gpios;
};
/**
@@ -1352,27 +1355,215 @@ static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON);
}
+#ifdef CONFIG_OF
+static int s3c_fb_dt_parse_gpios(struct device *dev, struct s3c_fb *sfb,
+ bool request)
+{
+ int nr_gpios, idx, gpio, ret;
+
+ nr_gpios = sfb->pdata->win[0]->max_bpp + 4;
+ sfb->gpios = devm_kzalloc(dev, sizeof(int) * nr_gpios, GFP_KERNEL);
+ if (!sfb->gpios) {
+ dev_err(dev, "unable to allocate private data for gpio\n");
+ return -ENOMEM;
+ }
+
+ for (idx = 0; idx < nr_gpios; idx++) {
+ gpio = of_get_gpio(dev->of_node, idx);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "invalid gpio[%d]: %d\n", idx, gpio);
+ return -EINVAL;
+ }
+
+ if (!request)
+ continue;
+
+ ret = gpio_request(gpio, "fimd");
+ if (ret) {
+ dev_err(dev, "gpio [%d] request failed\n", gpio);
+ goto gpio_free;
+ }
+ sfb->gpios[idx] = gpio;
+ }
+ return 0;
+
+gpio_free:
+ while (--idx >= 0)
+ gpio_free(sfb->gpios[idx]);
+ return ret;
+}
+
+static void s3c_fb_dt_free_gpios(struct s3c_fb *sfb)
+{
+ unsigned int idx, nr_gpio;
+
+ nr_gpio = sfb->pdata->win[0]->max_bpp + 4;
+ for (idx = 0; idx < nr_gpio; idx++)
+ gpio_free(sfb->gpios[idx]);
+}
+
+static struct s3c_fb_platdata *s3c_fb_dt_parse_pdata(struct device *dev)
+{
+ struct device_node *np = dev->of_node, *win_np;
+ struct device_node *disp_np;
+ struct s3c_fb_platdata *pd;
+ struct s3c_fb_pd_win *win;
+ u32 wnum = 0, data[4];
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_err(dev, "memory allocation for pdata failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pd->vtiming = devm_kzalloc(dev, sizeof(*pd->vtiming), GFP_KERNEL);
+ if (!pd->vtiming) {
+ dev_err(dev, "memory allocation for vtiming failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ if (of_get_property(np, "samsung,fimd-vidout-rgb", NULL))
+ pd->vidcon0 |= VIDCON0_VIDOUT_RGB;
+ if (of_get_property(np, "samsung,fimd-vidout-tv", NULL))
+ pd->vidcon0 |= VIDCON0_VIDOUT_TV;
+ if (of_get_property(np, "samsung,fimd-inv-hsync", NULL))
+ pd->vidcon1 |= VIDCON1_INV_HSYNC;
+ if (of_get_property(np, "samsung,fimd-inv-vsync", NULL))
+ pd->vidcon1 |= VIDCON1_INV_VSYNC;
+ if (of_get_property(np, "samsung,fimd-inv-vclk", NULL))
+ pd->vidcon1 |= VIDCON1_INV_VCLK;
+ if (of_get_property(np, "samsung,fimd-inv-vden", NULL))
+ pd->vidcon1 |= VIDCON1_INV_VDEN;
+
+ disp_np = of_parse_phandle(np, "samsung,fimd-display", 0);
+ if (!disp_np) {
+ dev_err(dev, "unable to find display panel info\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_property_read_u32_array(disp_np, "lcd-htiming", data, 4)) {
+ dev_err(dev, "invalid horizontal timing\n");
+ return ERR_PTR(-EINVAL);
+ }
+ pd->vtiming->left_margin = data[0];
+ pd->vtiming->right_margin = data[1];
+ pd->vtiming->hsync_len = data[2];
+ pd->vtiming->xres = data[3];
+
+ if (of_property_read_u32_array(disp_np, "lcd-vtiming", data, 4)) {
+ dev_err(dev, "invalid vertical timing\n");
+ return ERR_PTR(-EINVAL);
+ }
+ pd->vtiming->upper_margin = data[0];
+ pd->vtiming->lower_margin = data[1];
+ pd->vtiming->vsync_len = data[2];
+ pd->vtiming->yres = data[3];
+
+ of_property_read_u32_array(np, "samsung,fimd-frame-rate",
+ &pd->vtiming->refresh, 1);
+
+ for_each_child_of_node(np, win_np) {
+ if (of_property_read_u32_array(win_np, "samsung,fimd-win-id",
+ &wnum, 1)) {
+ dev_err(dev, "window id not specified\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ win = devm_kzalloc(dev, sizeof(*win), GFP_KERNEL);
+ if (!win) {
+ dev_err(dev, "no memory for window[%d] data\n", wnum);
+ return ERR_PTR(-ENOMEM);
+ }
+ pd->win[wnum] = win;
+
+ if (of_property_read_u32_array(win_np, "samsung,fimd-win-bpp",
+ data, 2)) {
+ dev_err(dev, "invalid window bpp\n");
+ return ERR_PTR(-EINVAL);
+ }
+ win->default_bpp = data[0];
+ win->max_bpp = data[1];
+
+ if (of_property_read_u32_array(win_np, "samsung,fimd-win-res",
+ data, 2)) {
+ dev_info(dev, "window [%d] resolution not specified. "
+ "Using lcd resolution X[%d] and Y[%d]", wnum,
+ pd->vtiming->xres, pd->vtiming->yres);
+ win->xres = pd->vtiming->xres;
+ win->yres = pd->vtiming->yres;
+ } else {
+ win->xres = data[0];
+ win->yres = data[1];
+ }
+
+ if (!of_property_read_u32_array(win_np,
+ "samsung,fimd-win-virtres", data, 2)) {
+ win->virtual_x = data[0];
+ win->virtual_y = data[1];
+ }
+ }
+
+ return pd;
+}
+#else
+static int s3c_fb_dt_parse_gpios(struct device *dev, struct s3c_fb *sfb,
+ bool request)
+{
+ return 0;
+}
+
+static void s3c_fb_dt_free_gpios(struct s3c_fb *sfb)
+{
+ return 0;
+}
+
+static int s3c_fb_dt_parse_pdata(struct device *dev,
+ struct s3c_fb_platdata **pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static const struct of_device_id s3c_fb_dt_match[];
+
+static inline struct s3c_fb_driverdata *s3c_fb_get_driver_data(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(s3c_fb_dt_match, pdev->dev.of_node);
+ return (struct s3c_fb_driverdata *)match->data;
+ }
+#endif
+ return (struct s3c_fb_driverdata *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
static int __devinit s3c_fb_probe(struct platform_device *pdev)
{
- const struct platform_device_id *platid;
struct s3c_fb_driverdata *fbdrv;
struct device *dev = &pdev->dev;
- struct s3c_fb_platdata *pd;
+ struct s3c_fb_platdata *pd = pdev->dev.platform_data;
struct s3c_fb *sfb;
struct resource *res;
int win;
int ret = 0;
u32 reg;
- platid = platform_get_device_id(pdev);
- fbdrv = (struct s3c_fb_driverdata *)platid->driver_data;
+ fbdrv = s3c_fb_get_driver_data(pdev);
if (fbdrv->variant.nr_windows > S3C_FB_MAX_WIN) {
dev_err(dev, "too many windows, cannot attach\n");
return -EINVAL;
}
- pd = pdev->dev.platform_data;
+ if (pdev->dev.of_node) {
+ pd = s3c_fb_dt_parse_pdata(&pdev->dev);
+ if (IS_ERR(pd))
+ return PTR_ERR(pd);
+ }
+
if (!pd) {
dev_err(dev, "no platform data specified\n");
return -EINVAL;
@@ -1449,7 +1640,12 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
/* setup gpio and output polarity controls */
- pd->setup_gpio();
+ if (dev->of_node) {
+ if (s3c_fb_dt_parse_gpios(dev, sfb, true))
+ goto err_lcd_clk;
+ } else {
+ pd->setup_gpio();
+ }
writel(pd->vidcon1, sfb->regs + VIDCON1);
@@ -1499,6 +1695,7 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
return 0;
err_pm_runtime:
+ s3c_fb_dt_free_gpios(sfb);
pm_runtime_put_sync(sfb->dev);
err_lcd_clk:
@@ -1545,6 +1742,7 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
pm_runtime_put_sync(sfb->dev);
pm_runtime_disable(sfb->dev);
+ s3c_fb_dt_free_gpios(sfb);
return 0;
}
@@ -1588,7 +1786,10 @@ static int s3c_fb_resume(struct device *dev)
clk_enable(sfb->lcd_clk);
/* setup gpio and output polarity controls */
- pd->setup_gpio();
+ if (dev->of_node)
+ s3c_fb_dt_parse_gpios(dev, sfb, false);
+ else
+ pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
/* set video clock running at under-run */
@@ -1658,7 +1859,10 @@ static int s3c_fb_runtime_resume(struct device *dev)
clk_enable(sfb->lcd_clk);
/* setup gpio and output polarity controls */
- pd->setup_gpio();
+ if (dev->of_node)
+ s3c_fb_dt_parse_gpios(dev, sfb, false);
+ else
+ pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
return 0;
@@ -2028,6 +2232,15 @@ static struct platform_device_id s3c_fb_driver_ids[] = {
};
MODULE_DEVICE_TABLE(platform, s3c_fb_driver_ids);
+#ifdef CONFIG_OF
+static const struct of_device_id s3c_fb_dt_match[] = {
+ { .compatible = "samsung,exynos4210-fimd",
+ .data = (void *)&s3c_fb_data_exynos4 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c_fb_dt_match);
+#endif
+
static const struct dev_pm_ops s3cfb_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(s3c_fb_suspend, s3c_fb_resume)
SET_RUNTIME_PM_OPS(s3c_fb_runtime_suspend, s3c_fb_runtime_resume,
@@ -2042,6 +2255,7 @@ static struct platform_driver s3c_fb_driver = {
.name = "s3c-fb",
.owner = THIS_MODULE,
.pm = &s3cfb_pm_ops,
+ .of_match_table = of_match_ptr(s3c_fb_dt_match),
},
};
--
1.6.6.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
