Hi, Without the patch(the patch was not made by me) that will follow, my gta02 machine is stuck at the end of this log, without any reaction: Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.0-next-20120327 (gnutoo@trisquel) (gcc version 4.6.3 20111117 (prerelease) (GCC) ) #271 Wed Mar 28 00:48:08 CEST 2012 [ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: GTA02 [ 0.000000] Ignoring tag cmdline (using the default kernel command line) [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU S3C2442B (id 0x32440aab) [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz [ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c0401d38, node_mem_map c0453000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) rootfstype=ubifs ubi.mtd=6,2048 root=ubi0:om-gta02-rootfs init=/bin/ash loglevel=8 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 125480k/125480k available, 5592k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc03b3600 (3758 kB) [ 0.000000] .init : 0xc03b4000 - 0xc03d6000 ( 136 kB) [ 0.000000] .data : 0xc03d6000 - 0xc0402440 ( 178 kB) [ 0.000000] .bss : 0xc0402464 - 0xc045270c ( 321 kB) [ 0.000000] NR_IRQS:99 [ 0.000000] irq: clearing pending ext status 000b02f0 [ 0.000000] irq: clearing pending ext status 000902d0 [ 0.000000] irq: clearing subpending status 000001c0 [ 0.000000] irq: clearing subpending status 00000080 [ 0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688) [ 0.040000] pid_max: default: 32768 minimum: 301 [ 0.040000] Mount-cache hash table entries: 512 [ 0.040000] Initializing cgroup subsys cpuacct [ 0.040000] Initializing cgroup subsys devices [ 0.040000] Initializing cgroup subsys freezer [ 0.040000] CPU: Testing write buffer coherency: ok [ 0.040000] Setting up static identity map for 0x302d26f8 - 0x302d2774 [ 0.045000] devtmpfs: initialized [ 0.045000] gpiochip_add: registered GPIOs 0 to 23 on device: GPIOA [ 0.045000] gpiochip_add: registered GPIOs 32 to 47 on device: GPIOB [ 0.050000] gpiochip_add: registered GPIOs 64 to 79 on device: GPIOC [ 0.050000] gpiochip_add: registered GPIOs 96 to 111 on device: GPIOD [ 0.050000] gpiochip_add: registered GPIOs 128 to 143 on device: GPIOE [ 0.050000] gpiochip_add: registered GPIOs 160 to 167 on device: GPIOF [ 0.050000] gpiochip_add: registered GPIOs 192 to 207 on device: GPIOG [ 0.050000] gpiochip_add: registered GPIOs 224 to 234 on device: GPIOH [ 0.050000] gpiochip_add: registered GPIOs 256 to 271 on device: GPIOJ [ 0.050000] dummy: [ 0.050000] NET: Registered protocol family 16 [ 0.055000] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.055000] S3C2442: Initialising architecture [ 0.055000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics [ 0.055000] DMA channel 0 at c8804000, irq 33 [ 0.055000] DMA channel 1 at c8804040, irq 34 [ 0.055000] DMA channel 2 at c8804080, irq 35 [ 0.055000] DMA channel 3 at c88040c0, irq 36 [ 0.055000] S3C244X: Clock Support, DVS off [ 0.065000] bio: create slab <bio-0> at 0 [ 0.065000] s3c-i2c s3c2440-i2c: slave address 0x10 [ 0.065000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz [ 0.075000] pcf50633 0-0073: Probed device version 19 variant 132 [ 0.095000] wake enabled for irq 53 [ 0.095000] auto: 3300 mV normal [ 0.110000] down1: 1300 <--> 1600 mV at 1300 mV normal [ 0.110000] down1: Voltage range but no REGULATOR_CHANGE_VOLTAGE [ 0.110000] down2: 1800 mV normal [ 0.110000] ldo1: 3300 mV normal [ 0.115000] ldo2: 3300 mV normal [ 0.115000] ldo3: 3000 mV normal [ 0.115000] ldo4: 3200 mV normal [ 0.120000] ldo5: 3000 mV normal [ 0.120000] ldo6: 3000 mV normal [ 0.120000] hcldo: 2000 <--> 3300 mV at 3000 mV normal [ 0.125000] memldo: 1800 mV normal [ 0.125000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter [ 0.125000] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.170000] NET: Registered protocol family 2 [ 0.170000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.175000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.175000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.175000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.175000] TCP: reno registered [ 0.175000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.175000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.175000] NET: Registered protocol family 1 [ 0.175000] s3c-adc s3c24xx-adc: operating without regulator "vdd" . [ 0.175000] platform s3c24xx-adc: Driver s3c-adc requests probe deferral [ 0.180000] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.180000] msgmni has been set to 245 [ 0.185000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.185000] io scheduler noop registered [ 0.185000] io scheduler deadline registered (default) [ 0.190000] s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 [ 0.190000] s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 [ 0.190000] s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 Denis. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
