Re: [PATCH 3/5] ARM: Exynos4: Add pinctrl devices and pin maps

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thomas Abraham wrote:
> Add the three pinctrl platform devices and the pin maps for Exynos4.
> 
> Signed-off-by: Thomas Abraham<thomas.abraham@xxxxxxxxxx>
> ---
>   arch/arm/mach-exynos/Kconfig              |    1 +
>   arch/arm/mach-exynos/Makefile             |    1 +
>   arch/arm/mach-exynos/common.h             |    6 ++
>   arch/arm/mach-exynos/dev-pinctrl.c        |  115 +++++++++++++++++++++++++++++
>   arch/arm/plat-samsung/include/plat/devs.h |    3 +
>   5 files changed, 126 insertions(+), 0 deletions(-)
>   create mode 100644 arch/arm/mach-exynos/dev-pinctrl.c

[...]

> +#include<linux/kernel.h>
> +#include<linux/dma-mapping.h>
> +#include<linux/platform_device.h>
> +#include<linux/interrupt.h>
> +#include<linux/pinctrl/machine.h>

#include <linux/ioport.h> for DEFINE_RES_xxx at below.

> +
> +#include<plat/devs.h>
> +#include<plat/pinctrl.h>
> +
> +#include<mach/map.h>
> +
> +static struct resource exynos4_pinctrl_resource0[] = {
> +	[0] = {
> +		.start  = EXYNOS4_PA_GPIO1,
> +		.end    = EXYNOS4_PA_GPIO1 + SZ_4K - 1,
> +		.flags  = IORESOURCE_MEM,
> +	},

[0] = DEFINE_RES_MEM(EXYNOS4_PA_GPIO1, SZ_4K),

> +	[1] = {
> +		.start  = IRQ_GPIO_XA,
> +		.end    = IRQ_GPIO_XA,
> +		.flags  = IORESOURCE_IRQ,
> +	},

[1] = DEFINE_RES_IRQ(IRQ_GPIO_XA),

But I'm thinking, we need to move to use EXYNOS4_IRQ_GPIO_XA here for
both EXYNOS4 and EXYNOS5 and as a note, I'm working on updating IRQ
naming you can see it in this week :)

> +};
> +
> +struct platform_device exynos4_pinctrl0 = {
> +	.name		= "exynos4-pinctrl",
> +	.id		= 0,
> +	.resource	= exynos4_pinctrl_resource0,
> +	.num_resources	= ARRAY_SIZE(exynos4_pinctrl_resource0),
> +};
> +
> +static struct resource exynos4_pinctrl_resource1[] = {
> +	[0] = {
> +		.start  = EXYNOS4_PA_GPIO2,
> +		.end    = EXYNOS4_PA_GPIO2 + SZ_4K - 1,
> +		.flags  = IORESOURCE_MEM,
> +	},

same as above.

> +	[1] = {
> +		.start  = IRQ_GPIO_XB,
> +		.end    = IRQ_GPIO_XB,
> +		.flags  = IORESOURCE_IRQ,
> +	},

same.

> +};
> +
> +struct platform_device exynos4_pinctrl1 = {
> +	.name		= "exynos4-pinctrl",
> +	.id		= 1,
> +	.resource	= exynos4_pinctrl_resource1,
> +	.num_resources	= ARRAY_SIZE(exynos4_pinctrl_resource1),
> +};
> +
> +static struct resource exynos4_pinctrl_resource2[] = {
> +	[0] = {
> +		.start  = EXYNOS4_PA_GPIO3,
> +		.end    = EXYNOS4_PA_GPIO3 + SZ_4K - 1,
> +		.flags  = IORESOURCE_MEM,
> +	},

same.

> +};
> +
> +struct platform_device exynos4_pinctrl2 = {
> +	.name		= "exynos4-pinctrl",
> +	.id		= 2,
> +	.resource	= exynos4_pinctrl_resource2,
> +	.num_resources	= ARRAY_SIZE(exynos4_pinctrl_resource2),
> +};
> +

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux