From: Jaecheol Lee <jc.lee@xxxxxxxxxxx>
This patch adds support cpufreq for EXYNOS4X12 SoCs. Basically,
the exynos-cpufreq.c is used commonly and exynos4x12-cpufreq.c
is used for EXYNOS4212(two Cortex-A9 cores) and EXYNOS4412(four
Cortex-A9 cores) SoCs.
Signed-off-by: Jaecheol Lee <jc.lee@xxxxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
Changes since v1:
Address comments from Sylwester
arch/arm/mach-exynos/include/mach/cpufreq.h | 1 +
drivers/cpufreq/Kconfig.arm | 7 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/exynos-cpufreq.c | 2 +
drivers/cpufreq/exynos4x12-cpufreq.c | 536 +++++++++++++++++++++++++++
5 files changed, 547 insertions(+), 0 deletions(-)
create mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/arch/arm/mach-exynos/include/mach/cpufreq.h
index 3df27f2..96ac0cb 100644
--- a/arch/arm/mach-exynos/include/mach/cpufreq.h
+++ b/arch/arm/mach-exynos/include/mach/cpufreq.h
@@ -32,3 +32,4 @@ struct exynos_dvfs_info {
};
extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
+extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index dc59abf..9b99a96 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -47,6 +47,7 @@ config ARM_EXYNOS_CPUFREQ
bool "SAMSUNG EXYNOS SoCs"
depends on ARCH_EXYNOS
select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210
+ select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412)
default y
help
This adds the CPUFreq driver common part for Samsung
@@ -60,3 +61,9 @@ config ARM_EXYNOS4210_CPUFREQ
help
This adds the CPUFreq driver for Samsung EXYNOS4210
SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+ bool "Samsung EXYNOS4X12"
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS4X12
+ SoC (EXYNOS4212 or EXYNOS4412).
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 042fbae..f37bbcc 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARCH_OMAP2PLUS) += omap-cpufreq.o
##################################################################################
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 7cfb516..2c63b68 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -254,6 +254,8 @@ static int __init exynos_cpufreq_init(void)
if (soc_is_exynos4210())
ret = exynos4210_cpufreq_init(exynos_info);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ ret = exynos4x12_cpufreq_init(exynos_info);
else
pr_err("%s: CPU type not found\n", __func__);
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
new file mode 100644
index 0000000..8c5a7af
--- /dev/null
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4X12 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <mach/regs-clock.h>
+#include <mach/cpufreq.h>
+
+#define CPUFREQ_LEVEL_END (L13 + 1)
+
+static int max_support_idx;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
+
+static struct clk *cpu_clk;
+static struct clk *moutcore;
+static struct clk *mout_mpll;
+static struct clk *mout_apll;
+
+struct cpufreq_clkdiv {
+ unsigned int index;
+ unsigned int clkdiv;
+ unsigned int clkdiv1;
+};
+
+static unsigned int exynos4x12_volt_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
+ {L0, 1500 * 1000},
+ {L1, 1400 * 1000},
+ {L2, 1300 * 1000},
+ {L3, 1200 * 1000},
+ {L4, 1100 * 1000},
+ {L5, 1000 * 1000},
+ {L6, 900 * 1000},
+ {L7, 800 * 1000},
+ {L8, 700 * 1000},
+ {L9, 600 * 1000},
+ {L10, 500 * 1000},
+ {L11, 400 * 1000},
+ {L12, 300 * 1000},
+ {L13, 200 * 1000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_clkdiv exynos4x12_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static unsigned int clkdiv_cpu0_4212[CPUFREQ_LEVEL_END][8] = {
+ /*
+ * Clock divider value for following
+ * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
+ * DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+ */
+ /* ARM L0: 1500 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L1: 1400 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L2: 1300 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L3: 1200 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L4: 1100 MHz */
+ { 0, 3, 6, 0, 4, 1, 2, 0 },
+
+ /* ARM L5: 1000 MHz */
+ { 0, 2, 5, 0, 4, 1, 1, 0 },
+
+ /* ARM L6: 900 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L7: 800 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L8: 700 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L9: 600 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L10: 500 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L11: 400 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L12: 300 MHz */
+ { 0, 2, 4, 0, 2, 1, 1, 0 },
+
+ /* ARM L13: 200 MHz */
+ { 0, 1, 3, 0, 1, 1, 1, 0 },
+};
+
+static unsigned int clkdiv_cpu0_4412[CPUFREQ_LEVEL_END][8] = {
+ /*
+ * Clock divider value for following
+ * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
+ * DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+ */
+ /* ARM L0: 1500 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L1: 1400 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L2: 1300 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L3: 1200 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L4: 1100 MHz */
+ { 0, 3, 6, 0, 4, 1, 2, 0 },
+
+ /* ARM L5: 1000 MHz */
+ { 0, 2, 5, 0, 4, 1, 1, 0 },
+
+ /* ARM L6: 900 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L7: 800 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L8: 700 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L9: 600 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L10: 500 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L11: 400 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L12: 300 MHz */
+ { 0, 2, 4, 0, 2, 1, 1, 0 },
+
+ /* ARM L13: 200 MHz */
+ { 0, 1, 3, 0, 1, 1, 1, 0 },
+};
+
+static unsigned int clkdiv_cpu1_4212[CPUFREQ_LEVEL_END][2] = {
+ /* Clock divider value for following
+ * { DIVCOPY, DIVHPM }
+ */
+ /* ARM L0: 1500 MHz */
+ { 6, 0 },
+
+ /* ARM L1: 1400 MHz */
+ { 6, 0 },
+
+ /* ARM L2: 1300 MHz */
+ { 5, 0 },
+
+ /* ARM L3: 1200 MHz */
+ { 5, 0 },
+
+ /* ARM L4: 1100 MHz */
+ { 4, 0 },
+
+ /* ARM L5: 1000 MHz */
+ { 4, 0 },
+
+ /* ARM L6: 900 MHz */
+ { 3, 0 },
+
+ /* ARM L7: 800 MHz */
+ { 3, 0 },
+
+ /* ARM L8: 700 MHz */
+ { 3, 0 },
+
+ /* ARM L9: 600 MHz */
+ { 3, 0 },
+
+ /* ARM L10: 500 MHz */
+ { 3, 0 },
+
+ /* ARM L11: 400 MHz */
+ { 3, 0 },
+
+ /* ARM L12: 300 MHz */
+ { 3, 0 },
+
+ /* ARM L13: 200 MHz */
+ { 3, 0 },
+};
+
+static unsigned int clkdiv_cpu1_4412[CPUFREQ_LEVEL_END][3] = {
+ /* Clock divider value for following
+ * { DIVCOPY, DIVHPM, DIVCORES }
+ */
+ /* ARM L0: 1500 MHz */
+ { 6, 0, 7 },
+
+ /* ARM L1: 1400 MHz */
+ { 6, 0, 6 },
+
+ /* ARM L2: 1300 MHz */
+ { 5, 0, 6 },
+
+ /* ARM L3: 1200 MHz */
+ { 5, 0, 5 },
+
+ /* ARM L4: 1100 MHz */
+ { 4, 0, 5 },
+
+ /* ARM L5: 1000 MHz */
+ { 4, 0, 4 },
+
+ /* ARM L6: 900 MHz */
+ { 3, 0, 4 },
+
+ /* ARM L7: 800 MHz */
+ { 3, 0, 3 },
+
+ /* ARM L8: 700 MHz */
+ { 3, 0, 3 },
+
+ /* ARM L9: 600 MHz */
+ { 3, 0, 2 },
+
+ /* ARM L10: 500 MHz */
+ { 3, 0, 2 },
+
+ /* ARM L11: 400 MHz */
+ { 3, 0, 1 },
+
+ /* ARM L12: 300 MHz */
+ { 3, 0, 1 },
+
+ /* ARM L13: 200 MHz */
+ { 3, 0, 0 },
+};
+
+static unsigned int exynos4x12_apll_pms_table[CPUFREQ_LEVEL_END] = {
+ /* APLL FOUT L0: 1500 MHz */
+ ((250 << 16) | (4 << 8) | (0x0)),
+
+ /* APLL FOUT L1: 1400 MHz */
+ ((175 << 16) | (3 << 8) | (0x0)),
+
+ /* APLL FOUT L2: 1300 MHz */
+ ((325 << 16) | (6 << 8) | (0x0)),
+
+ /* APLL FOUT L3: 1200 MHz */
+ ((200 << 16) | (4 << 8) | (0x0)),
+
+ /* APLL FOUT L4: 1100 MHz */
+ ((275 << 16) | (6 << 8) | (0x0)),
+
+ /* APLL FOUT L5: 1000 MHz */
+ ((125 << 16) | (3 << 8) | (0x0)),
+
+ /* APLL FOUT L6: 900 MHz */
+ ((150 << 16) | (4 << 8) | (0x0)),
+
+ /* APLL FOUT L7: 800 MHz */
+ ((100 << 16) | (3 << 8) | (0x0)),
+
+ /* APLL FOUT L8: 700 MHz */
+ ((175 << 16) | (3 << 8) | (0x1)),
+
+ /* APLL FOUT L9: 600 MHz */
+ ((200 << 16) | (4 << 8) | (0x1)),
+
+ /* APLL FOUT L10: 500 MHz */
+ ((125 << 16) | (3 << 8) | (0x1)),
+
+ /* APLL FOUT L11 400 MHz */
+ ((100 << 16) | (3 << 8) | (0x1)),
+
+ /* APLL FOUT L12: 300 MHz */
+ ((200 << 16) | (4 << 8) | (0x2)),
+
+ /* APLL FOUT L13: 200 MHz */
+ ((100 << 16) | (3 << 8) | (0x2)),
+};
+
+static const unsigned int asv_voltage_4x12[CPUFREQ_LEVEL_END] = {
+ 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
+ 1000000, 987500, 975000, 950000, 925000, 900000, 900000
+};
+
+static void exynos4x12_set_clkdiv(unsigned int div_index)
+{
+ unsigned int tmp;
+ unsigned int stat_cpu1;
+
+ /* Change Divider - CPU0 */
+
+ tmp = exynos4x12_clkdiv_table[div_index].clkdiv;
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+
+ while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
+ cpu_relax();
+
+ /* Change Divider - CPU1 */
+ tmp = exynos4x12_clkdiv_table[div_index].clkdiv1;
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
+ if (soc_is_exynos4212())
+ stat_cpu1 = 0x11;
+ else
+ stat_cpu1 = 0x111;
+
+ while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
+ cpu_relax();
+}
+
+static void exynos4x12_set_apll(unsigned int index)
+{
+ unsigned int tmp, pdiv;
+
+ /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+ clk_set_parent(moutcore, mout_mpll);
+
+ do {
+ cpu_relax();
+ tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+ >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
+ tmp &= 0x7;
+ } while (tmp != 0x2);
+
+ /* 2. Set APLL Lock time */
+ pdiv = ((exynos4x12_apll_pms_table[index] >> 8) & 0x3f);
+
+ __raw_writel((pdiv * 250), EXYNOS4_APLL_LOCK);
+
+ /* 3. Change PLL PMS values */
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
+ tmp |= exynos4x12_apll_pms_table[index];
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
+
+ /* 4. wait_lock_time */
+ do {
+ cpu_relax();
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ } while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT)));
+
+ /* 5. MUX_CORE_SEL = APLL */
+ clk_set_parent(moutcore, mout_apll);
+
+ do {
+ cpu_relax();
+ tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+ tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
+ } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
+}
+
+bool exynos4x12_pms_change(unsigned int old_index, unsigned int new_index)
+{
+ unsigned int old_pm = exynos4x12_apll_pms_table[old_index] >> 8;
+ unsigned int new_pm = exynos4x12_apll_pms_table[new_index] >> 8;
+
+ return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos4x12_set_frequency(unsigned int old_index,
+ unsigned int new_index)
+{
+ unsigned int tmp;
+
+ if (old_index > new_index) {
+ if (!exynos4x12_pms_change(old_index, new_index)) {
+ /* 1. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ /* 2. Change just s value in apll m,p,s value */
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ tmp &= ~(0x7 << 0);
+ tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
+
+ } else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ /* 2. Change the apll m,p,s value */
+ exynos4x12_set_apll(new_index);
+ }
+ } else if (old_index < new_index) {
+ if (!exynos4x12_pms_change(old_index, new_index)) {
+ /* 1. Change just s value in apll m,p,s value */
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ tmp &= ~(0x7 << 0);
+ tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
+ /* 2. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ } else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the apll m,p,s value */
+ exynos4x12_set_apll(new_index);
+ /* 2. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ }
+ }
+}
+
+static void __init set_volt_table(void)
+{
+ unsigned int i;
+
+ max_support_idx = L1;
+
+ /* Not supported */
+ exynos4x12_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
+
+ for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
+ exynos4x12_volt_table[i] = asv_voltage_4x12[i];
+}
+
+int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
+{
+ int i;
+ unsigned int tmp;
+ unsigned long rate;
+
+ set_volt_table();
+
+ cpu_clk = clk_get(NULL, "armclk");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ moutcore = clk_get(NULL, "moutcore");
+ if (IS_ERR(moutcore))
+ goto err_moutcore;
+
+ mout_mpll = clk_get(NULL, "mout_mpll");
+ if (IS_ERR(mout_mpll))
+ goto err_mout_mpll;
+
+ rate = clk_get_rate(mout_mpll) / 1000;
+
+ mout_apll = clk_get(NULL, "mout_apll");
+ if (IS_ERR(mout_apll))
+ goto err_mout_apll;
+
+ for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
+
+ exynos4x12_clkdiv_table[i].index = i;
+
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);
+
+ tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
+ EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
+ EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
+ EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
+ EXYNOS4_CLKDIV_CPU0_ATB_MASK |
+ EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
+ EXYNOS4_CLKDIV_CPU0_APLL_MASK);
+
+ if (soc_is_exynos4212()) {
+ tmp |= ((clkdiv_cpu0_4212[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+ (clkdiv_cpu0_4212[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+ (clkdiv_cpu0_4212[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+ (clkdiv_cpu0_4212[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+ (clkdiv_cpu0_4212[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+ (clkdiv_cpu0_4212[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+ (clkdiv_cpu0_4212[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));
+ } else {
+ tmp &= ~EXYNOS4_CLKDIV_CPU0_CORE2_MASK;
+
+ tmp |= ((clkdiv_cpu0_4412[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+ (clkdiv_cpu0_4412[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+ (clkdiv_cpu0_4412[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+ (clkdiv_cpu0_4412[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+ (clkdiv_cpu0_4412[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+ (clkdiv_cpu0_4412[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+ (clkdiv_cpu0_4412[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT) |
+ (clkdiv_cpu0_4412[i][7] << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT));
+ }
+
+ exynos4x12_clkdiv_table[i].clkdiv = tmp;
+
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);
+
+ if (soc_is_exynos4212()) {
+ tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
+ EXYNOS4_CLKDIV_CPU1_HPM_MASK);
+ tmp |= ((clkdiv_cpu1_4212[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
+ (clkdiv_cpu1_4212[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT));
+ } else {
+ tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
+ EXYNOS4_CLKDIV_CPU1_HPM_MASK |
+ EXYNOS4_CLKDIV_CPU1_CORES_MASK);
+ tmp |= ((clkdiv_cpu1_4412[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
+ (clkdiv_cpu1_4412[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT) |
+ (clkdiv_cpu1_4412[i][2] << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT));
+ }
+ exynos4x12_clkdiv_table[i].clkdiv1 = tmp;
+ }
+
+ info->mpll_freq_khz = rate;
+ info->pm_lock_idx = L5;
+ info->pll_safe_idx = L7;
+ info->max_support_idx = max_support_idx;
+ info->min_support_idx = min_support_idx;
+ info->cpu_clk = cpu_clk;
+ info->volt_table = exynos4x12_volt_table;
+ info->freq_table = exynos4x12_freq_table;
+ info->set_freq = exynos4x12_set_frequency;
+ info->need_apll_change = exynos4x12_pms_change;
+
+ return 0;
+
+err_mout_apll:
+ clk_put(mout_mpll);
+err_mout_mpll:
+ clk_put(moutcore);
+err_moutcore:
+ clk_put(cpu_clk);
+
+ pr_debug("%s: failed initialization\n", __func__);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(exynos4x12_cpufreq_init);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
