On 24 February 2012 16:00, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote: > On 02/24/2012 06:10 PM, Thomas Abraham wrote: > >> Dear Mr. Chung, >> >> On 14 February 2012 10:33, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote: >>> The header-file is moved to drivers/mmc/host from plat. >>> >>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> >>> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> >>> --- >>> arch/arm/mach-exynos/setup-sdhci-gpio.c | 1 - >>> arch/arm/mach-s5pc100/setup-sdhci-gpio.c | 1 - >>> arch/arm/mach-s5pv210/setup-sdhci-gpio.c | 1 - >>> arch/arm/plat-samsung/include/plat/regs-sdhci.h | 87 ---------------------- >>> drivers/mmc/host/sdhci-s3c.h | 89 +++++++++++++++++++++++ >>> 5 files changed, 89 insertions(+), 90 deletions(-) >>> delete mode 100644 arch/arm/plat-samsung/include/plat/regs-sdhci.h >>> create mode 100644 drivers/mmc/host/sdhci-s3c.h >>> >>> diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c >>> index e8d08bf..cda3714 100644 >>> --- a/arch/arm/mach-exynos/setup-sdhci-gpio.c >>> +++ b/arch/arm/mach-exynos/setup-sdhci-gpio.c >>> @@ -20,7 +20,6 @@ >>> #include <linux/mmc/card.h> >>> >>> #include <plat/gpio-cfg.h> >>> -#include <plat/regs-sdhci.h> >>> #include <plat/sdhci.h> >>> >>> void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) >>> diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c >>> index 03c02d0..6010c03 100644 >>> --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c >>> +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c >>> @@ -19,7 +19,6 @@ >>> #include <linux/mmc/card.h> >>> >>> #include <plat/gpio-cfg.h> >>> -#include <plat/regs-sdhci.h> >>> #include <plat/sdhci.h> >>> >>> void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) >>> diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c >>> index 3e3ac05..0512ada 100644 >>> --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c >>> +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c >>> @@ -20,7 +20,6 @@ >>> #include <linux/mmc/card.h> >>> >>> #include <plat/gpio-cfg.h> >>> -#include <plat/regs-sdhci.h> >>> #include <plat/sdhci.h> >>> >>> void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) >>> diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h >>> deleted file mode 100644 >>> index e34049a..0000000 >>> --- a/arch/arm/plat-samsung/include/plat/regs-sdhci.h >>> +++ /dev/null >>> @@ -1,87 +0,0 @@ >>> -/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h >>> - * >>> - * Copyright 2008 Openmoko, Inc. >>> - * Copyright 2008 Simtec Electronics >>> - * http://armlinux.simtec.co.uk/ >>> - * Ben Dooks <ben@xxxxxxxxxxxx> >>> - * >>> - * S3C Platform - SDHCI (HSMMC) register definitions >>> - * >>> - * This program is free software; you can redistribute it and/or modify >>> - * it under the terms of the GNU General Public License version 2 as >>> - * published by the Free Software Foundation. >>> -*/ >>> - >>> -#ifndef __PLAT_S3C_SDHCI_REGS_H >>> -#define __PLAT_S3C_SDHCI_REGS_H __FILE__ >>> - >>> -#define S3C_SDHCI_CONTROL2 (0x80) >>> -#define S3C_SDHCI_CONTROL3 (0x84) >>> -#define S3C64XX_SDHCI_CONTROL4 (0x8C) >>> - >>> -#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) >>> -#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) >>> -#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) >>> -#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) >>> - >>> -#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) >>> -#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) >>> -#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) >>> - >>> -#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) >>> -#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) >>> -#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) >>> - >>> -#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) >>> -#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) >>> -#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) >>> -#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) >>> -#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) >>> - >>> -#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) >>> -#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) >>> -#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) >>> -#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) >>> -#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) >>> -#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) >>> - >>> -#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) >>> -#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) >>> -#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) >>> -#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) >>> -#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) >>> -#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) >>> -#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) >>> -#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) >>> - >>> -#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) >>> -#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) >>> -#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) >>> -#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) >>> - >>> -#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) >>> -#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) >>> -#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) >>> - >>> -#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) >>> -#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) >>> -#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) >>> - >>> -#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) >>> -#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) >>> -#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) >>> - >>> -#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) >>> -#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) >>> -#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) >>> - >>> -#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) >>> -#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) >>> -#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) >>> -#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) >>> -#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) >>> -#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) >>> - >>> -#define S3C64XX_SDHCI_CONTROL4_BUSY (1) >>> - >>> -#endif /* __PLAT_S3C_SDHCI_REGS_H */ >>> diff --git a/drivers/mmc/host/sdhci-s3c.h b/drivers/mmc/host/sdhci-s3c.h >>> new file mode 100644 >>> index 0000000..e233b15 >>> --- /dev/null >>> +++ b/drivers/mmc/host/sdhci-s3c.h >>> @@ -0,0 +1,89 @@ >>> +/* >>> + * SDHCI Samsung controller driver generics for OF and pltfm. >>> + * >>> + * Copyright 2008 Openmoko, Inc. >>> + * Copyright 2008 Simtec Electronics >>> + * http://armlinux.simtec.co.uk/ >>> + * Ben Dooks <ben@xxxxxxxxxxxx> >>> + * >>> + * S3C Platform - SDHCI (HSMMC) register definitions >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License as published by >>> + * the Free Software Foundation; either version 2 of the License. >>> + */ >>> + >>> +#ifndef __DRIVERS_MMC_S3C_SDHCI_H >>> +#define __DRIVERS_MMC_S3C_SDHCI_H >>> + >>> +#define S3C_SDHCI_CONTROL2 (0x80) >>> +#define S3C_SDHCI_CONTROL3 (0x84) >>> +#define S3C_SDHCI_CONTROL4 (0x8C) >>> + >>> +#define S3C_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) >>> +#define S3C_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) >>> +#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) >>> +#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) >>> + >>> +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) >>> +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) >>> +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) >>> + >>> +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) >>> +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) >>> +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) >>> + >>> +#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) >>> +#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) >>> +#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) >>> +#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) >>> +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) >>> + >>> +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) >>> +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) >>> +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) >>> +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) >>> +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) >>> +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) >>> + >>> +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) >>> +#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) >>> +#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) >>> +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) >>> +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) >>> +#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) >>> +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) >>> +#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) >>> + >>> +#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) >>> +#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) >>> +#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) >>> +#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) >>> + >>> +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) >>> +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) >>> +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) >>> + >>> +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) >>> +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) >>> +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) >>> + >>> +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) >>> +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) >>> +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) >>> + >>> +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) >>> +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) >>> +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) >>> + >>> +#define S3C_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) >>> +#define S3C_SDHCI_CONTROL4_DRIVE_SHIFT (16) >>> +#define S3C_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) >>> +#define S3C_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) >>> +#define S3C_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) >>> +#define S3C_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) >> >> The CONTROL4 register is available from s3c6410 onwards. The sdhci >> controller in s3c24xx (such as s3c2416) do not have the CONTROL4 >> register. I understand that renaming S3C64XX... to S3C should be fine >> but the information that it is applicable from S3C64XX onwards only is >> lost. Is this rename mandatory? I do not have any preference here, but >> I guess we could just leave it as S3C64XX. > > Right..But CONTROL4 register didn't present only in s3c24xx. > (just reserved). > I think that can control in device driver whether s3c24xx or not. > And also in CONTROL2 register, SELBASECLK bit didn't be used up to exynos4. > But everything used S3C_SDHCI_XXX. so i have changed them. > I didn't prefer anything, too. Ok. In this case, we can do as Heiko suggested - Add comments in the header file that CONTROL4 is used in s3c64xx onwards. Thanks, Thomas. > Are there any reason that leave that information? > > Best Regards, > Jaehoon Chung > >> >> Thanks, >> Thomas. >> >>> + >>> +#define S3C_SDHCI_CONTROL4_BUSY (1) >>> + >>> +#endif /* __DRIVERS_MMC_S3C_SDHCI_H */ >>> + >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |