Am Freitag, 24. Februar 2012, 10:10:44 schrieb Thomas Abraham: > Dear Mr. Chung, > > On 14 February 2012 10:33, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote: > > The header-file is moved to drivers/mmc/host from plat. > > > > Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> > > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > > --- > > arch/arm/mach-exynos/setup-sdhci-gpio.c | 1 - > > arch/arm/mach-s5pc100/setup-sdhci-gpio.c | 1 - > > arch/arm/mach-s5pv210/setup-sdhci-gpio.c | 1 - > > arch/arm/plat-samsung/include/plat/regs-sdhci.h | 87 > > ---------------------- drivers/mmc/host/sdhci-s3c.h | > > 89 +++++++++++++++++++++++ 5 files changed, 89 insertions(+), 90 > > deletions(-) > > delete mode 100644 arch/arm/plat-samsung/include/plat/regs-sdhci.h > > create mode 100644 drivers/mmc/host/sdhci-s3c.h > > > > diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c > > b/arch/arm/mach-exynos/setup-sdhci-gpio.c index e8d08bf..cda3714 100644 > > --- a/arch/arm/mach-exynos/setup-sdhci-gpio.c > > +++ b/arch/arm/mach-exynos/setup-sdhci-gpio.c > > @@ -20,7 +20,6 @@ > > #include <linux/mmc/card.h> > > > > #include <plat/gpio-cfg.h> > > -#include <plat/regs-sdhci.h> > > #include <plat/sdhci.h> > > > > void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int > > width) diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c > > b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index 03c02d0..6010c03 100644 > > --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c > > +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c > > @@ -19,7 +19,6 @@ > > #include <linux/mmc/card.h> > > > > #include <plat/gpio-cfg.h> > > -#include <plat/regs-sdhci.h> > > #include <plat/sdhci.h> > > > > void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int > > width) diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c > > b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 3e3ac05..0512ada 100644 > > --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c > > +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c > > @@ -20,7 +20,6 @@ > > #include <linux/mmc/card.h> > > > > #include <plat/gpio-cfg.h> > > -#include <plat/regs-sdhci.h> > > #include <plat/sdhci.h> > > > > void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int > > width) diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h > > b/arch/arm/plat-samsung/include/plat/regs-sdhci.h deleted file mode > > 100644 > > index e34049a..0000000 > > --- a/arch/arm/plat-samsung/include/plat/regs-sdhci.h > > +++ /dev/null > > @@ -1,87 +0,0 @@ > > -/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h > > - * > > - * Copyright 2008 Openmoko, Inc. > > - * Copyright 2008 Simtec Electronics > > - * http://armlinux.simtec.co.uk/ > > - * Ben Dooks <ben@xxxxxxxxxxxx> > > - * > > - * S3C Platform - SDHCI (HSMMC) register definitions > > - * > > - * This program is free software; you can redistribute it and/or modify > > - * it under the terms of the GNU General Public License version 2 as > > - * published by the Free Software Foundation. > > -*/ > > - > > -#ifndef __PLAT_S3C_SDHCI_REGS_H > > -#define __PLAT_S3C_SDHCI_REGS_H __FILE__ > > - > > -#define S3C_SDHCI_CONTROL2 (0x80) > > -#define S3C_SDHCI_CONTROL3 (0x84) > > -#define S3C64XX_SDHCI_CONTROL4 (0x8C) > > - > > -#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) > > -#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) > > -#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) > > -#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) > > - > > -#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) > > -#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) > > -#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) > > - > > -#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) > > -#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) > > -#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) > > - > > -#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) > > -#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) > > -#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) > > -#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) > > -#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) > > - > > -#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) > > -#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) > > -#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) > > -#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) > > -#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) > > -#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) > > - > > -#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) > > -#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) > > -#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) > > -#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) > > -#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) > > -#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) > > -#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) > > -#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) > > - > > -#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) > > -#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) > > -#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) > > -#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) > > - > > -#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) > > -#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) > > -#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) > > - > > -#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) > > -#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) > > -#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) > > - > > -#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) > > -#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) > > -#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) > > - > > -#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) > > -#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) > > -#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) > > - > > -#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) > > -#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) > > -#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) > > -#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) > > -#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) > > -#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) > > - > > -#define S3C64XX_SDHCI_CONTROL4_BUSY (1) > > - > > -#endif /* __PLAT_S3C_SDHCI_REGS_H */ > > diff --git a/drivers/mmc/host/sdhci-s3c.h b/drivers/mmc/host/sdhci-s3c.h > > new file mode 100644 > > index 0000000..e233b15 > > --- /dev/null > > +++ b/drivers/mmc/host/sdhci-s3c.h > > @@ -0,0 +1,89 @@ > > +/* > > + * SDHCI Samsung controller driver generics for OF and pltfm. > > + * > > + * Copyright 2008 Openmoko, Inc. > > + * Copyright 2008 Simtec Electronics > > + * http://armlinux.simtec.co.uk/ > > + * Ben Dooks <ben@xxxxxxxxxxxx> > > + * > > + * S3C Platform - SDHCI (HSMMC) register definitions > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License. > > + */ > > + > > +#ifndef __DRIVERS_MMC_S3C_SDHCI_H > > +#define __DRIVERS_MMC_S3C_SDHCI_H > > + > > +#define S3C_SDHCI_CONTROL2 (0x80) > > +#define S3C_SDHCI_CONTROL3 (0x84) > > +#define S3C_SDHCI_CONTROL4 (0x8C) > > + > > +#define S3C_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) > > +#define S3C_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) > > +#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) > > +#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) > > + > > +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) > > +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) > > +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) > > + > > +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) > > +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) > > +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) > > + > > +#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) > > +#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) > > +#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) > > +#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) > > +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) > > + > > +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) > > +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) > > +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) > > +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) > > +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) > > +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) > > + > > +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) > > +#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) > > +#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) > > +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) > > +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) > > +#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) > > +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) > > +#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) > > + > > +#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) > > +#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) > > +#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) > > +#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) > > + > > +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) > > +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) > > +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) > > + > > +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) > > +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) > > +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) > > + > > +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) > > +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) > > +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) > > + > > +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) > > +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) > > +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) > > + > > +#define S3C_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) > > +#define S3C_SDHCI_CONTROL4_DRIVE_SHIFT (16) > > +#define S3C_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) > > +#define S3C_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) > > +#define S3C_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) > > +#define S3C_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) > > The CONTROL4 register is available from s3c6410 onwards. The sdhci > controller in s3c24xx (such as s3c2416) do not have the CONTROL4 > register. I understand that renaming S3C64XX... to S3C should be fine > but the information that it is applicable from S3C64XX onwards only is > lost. Is this rename mandatory? I do not have any preference here, but > I guess we could just leave it as S3C64XX. I would second that, or as an alternative add a comment above the constants indicating that they are for s3c64xx and onward. Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |