(please CC me in your replies as I am not suscribed to the ML)
The following patch allows users to use KGDB over serial console on
board based on Samsung SOC. It has been tested on a mini2440.
Signed-off-by: Julien Pichon <pichon.jln@xxxxxxxxx>
---
drivers/tty/serial/samsung.c | 50 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 50 insertions(+), 0 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index f96f37b..9f703ca 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -877,11 +877,24 @@ s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
static struct console s3c24xx_serial_console;
+static int __init s3c24xx_serial_console_init(void)
+{
+ register_console(&s3c24xx_serial_console);
+ return 0;
+}
+console_initcall(s3c24xx_serial_console_init);
+
#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
#else
#define S3C24XX_SERIAL_CONSOLE NULL
#endif
+#ifdef CONFIG_CONSOLE_POLL
+static int s3c24xx_serial_get_poll_char(struct uart_port *port);
+static void s3c24xx_serial_put_poll_char(struct uart_port *port,
+ unsigned char c);
+#endif
+
static struct uart_ops s3c24xx_serial_ops = {
.pm = s3c24xx_serial_pm,
.tx_empty = s3c24xx_serial_tx_empty,
@@ -900,6 +913,10 @@ static struct uart_ops s3c24xx_serial_ops = {
.request_port = s3c24xx_serial_request_port,
.config_port = s3c24xx_serial_config_port,
.verify_port = s3c24xx_serial_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = s3c24xx_serial_get_poll_char,
+ .poll_put_char = s3c24xx_serial_put_poll_char,
+#endif
};
static struct uart_driver s3c24xx_uart_drv = {
@@ -1311,6 +1328,39 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
}
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int s3c24xx_serial_get_poll_char(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+ unsigned int ufstat, count;
+
+ do {
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+ count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
+ if (!count)
+ cpu_relax();
+ } while (!count);
+
+ return rd_regb(port, S3C2410_URXH);
+}
+
+static void s3c24xx_serial_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+
+ while (!s3c24xx_serial_console_txrdy(port, ufcon))
+ cpu_relax();
+ wr_regb(cons_uart, S3C2410_UTXH, c);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static void
s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
{
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
