Hi, On 02/04/2012 09:13 AM, Kisang Lee wrote: > Cc: Arnd Bergmann<arnd<at> arndb.de> > Cc: Greg Kroah-Hartman<greg<at> kroah.com> > > Following files are added for C2C driver > c2c.h : Definition of C2C platform data and mode > regs-c2c.h : Definition of C2C registers > > Signed-off-by: Kisang Lee<kisang80.lee@xxxxxxxxxxx> > --- > arch/arm/mach-exynos/include/mach/c2c.h | 65 +++++++++++++++++++++++ > arch/arm/mach-exynos/include/mach/regs-c2c.h | 71 ++++++++++++++++++++++++++ > 2 files changed, 136 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-exynos/include/mach/c2c.h > create mode 100644 arch/arm/mach-exynos/include/mach/regs-c2c.h > ... > diff --git a/arch/arm/mach-exynos/include/mach/regs-c2c.h b/arch/arm/mach-exynos/include/mach/regs-c2c.h > new file mode 100644 > index 0000000..0c3d005 > --- /dev/null > +++ b/arch/arm/mach-exynos/include/mach/regs-c2c.h > @@ -0,0 +1,71 @@ > +/* linux/arch/arm/mach-exynos/include/mach/regs-c2c.h > + * > + * Copyright (c) 2011 Samsung Electronics Co., Ltd. 2012 ? > + * http://www.samsung.com/ > + * > + * Register definition file for Samsung C2C > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#ifndef __ASM_ARM_REGS_S5P_C2C_H > +#define __ASM_ARM_REGS_S5P_C2C_H > + > +/***************************************************************/ > +/* C2C Registers part */ > +/***************************************************************/ > +#define EXYNOS_C2C_REVISION 0x0 > +#define EXYNOS_C2C_SYSCONFIG 0x4 > +#define EXYNOS_C2C_SYSSTATUS 0x8 > +#define EXYNOS_C2C_PORTCONFIG 0xc > +#define EXYNOS_C2C_MIRRORMODE 0x10 > +#define EXYNOS_C2C_IRQ_RAW_STAT0 0x14 > +#define EXYNOS_C2C_IRQ_RAW_STAT1 0x18 > +#define EXYNOS_C2C_IRQ_EN_STAT0 0x1c > +#define EXYNOS_C2C_IRQ_EN_STAT1 0x20 > +#define EXYNOS_C2C_IRQ_EN_SET0 0x24 > +#define EXYNOS_C2C_IRQ_EN_SET1 0x28 > +#define EXYNOS_C2C_IRQ_EN_CLEAR0 0x2c > +#define EXYNOS_C2C_IRQ_EN_CLEAR1 0x30 > +#define EXYNOS_C2C_IRQ_EOI 0x34 > + > +#define EXYNOS_C2C_FCLK_FREQ 0x40 > +#define EXYNOS_C2C_RX_MAX_FREQ 0x44 > +#define EXYNOS_C2C_TX_MAX_FREQ 0x48 > +#define EXYNOS_C2C_RX_MAX_FREQ_ACK 0x4c > +#define EXYNOS_C2C_WAKE_REQ 0x50 > +#define EXYNOS_C2C_WAKE_ACK 0x54 > +#define EXYNOS_C2C_STANDBY 0x60 > +#define EXYNOS_C2C_STANDBY_IN 0x64 > +#define EXYNOS_C2C_WAIT 0x68 > +#define EXYNOS_C2C_GENI_CONTROL 0x70 > +#define EXYNOS_C2C_GENI_MASK 0x74 > +#define EXYNOS_C2C_GENO_STATUS 0x80 > + > +#define EXYNOS_C2C_GENO_INT 0x84 > +#define EXYNOS_C2C_GENO_LEVEL 0x88 > + > +/***************************************************************/ > +/* C2C Bit definition part */ > +/***************************************************************/ > +/* SYSREG Bit definition */ > +#define C2C_SYSREG_CG (31) /* C2C Clock Gating [31] */ > +#define C2C_SYSREG_MO (30) /* Master On [30] */ > +#define C2C_SYSREG_FCLK (20) /* Default Functional Clock Freq [29:20] */ > +#define C2C_SYSREG_TXW (18) /* Default Tx Width [19:18] */ > +#define C2C_SYSREG_RXW (16) /* Default Rx Width [17:16] */ > +#define C2C_SYSREG_RST (15) /* Reset [15] */ > +#define C2C_SYSREG_MD (14) /* Master On [14] */ > +#define C2C_SYSREG_RTRST (13) /* Reset retention registers [13] */ > +#define C2C_SYSREG_BASE_ADDR (3) /* DRAM Base Address [12:3] */ > +#define C2C_SYSREG_DRAM_SIZE (0) /* DRAM Size [2:0] */ > + > +#define C2C_GENIO_LATENCY_INT (26) > +#define C2C_GENIO_OPP_INT (27) > +#define C2C_GENIO_OPP_MODE0 (28) > +#define C2C_GENIO_OPP_MODE1 (29) > +#define C2C_GENIO_LATENCY0 (30) > +#define C2C_GENIO_LATENCY1 (31) Could we have the parentheses around numbers removed ? They don't seem to be useful for anything. > +#endif /* __ASM_ARM_REGS_S5P_C2C_H */ -- Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |