This patch adds clocks, gpio configs and platform devices for EXYNOS5 SPI.
And also the spi clock and gpio setup are added in the smdk5250_machine_init.
Signed-off-by: Kyoungil Kim <ki0351.kim@xxxxxxxxxxx>
---
arch/arm/mach-exynos/clock-exynos5.c | 89 +++++++++++++++
arch/arm/mach-exynos/include/mach/map.h | 13 ++-
arch/arm/mach-exynos/include/mach/regs-clock.h | 4 +
arch/arm/mach-exynos/mach-smdk5250.c | 108 ++++++++++++++++++-
arch/arm/mach-exynos/setup-spi.c | 129 ++++++++++++++++++++--
arch/arm/plat-samsung/include/plat/s3c64xx-spi.h | 4 +
6 files changed, 330 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index b43161b..d6fa729 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -83,6 +83,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
}
+static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
+}
+
static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
@@ -641,6 +646,21 @@ static struct clk exynos5_init_clocks_off[] = {
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 14),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 18),
}
};
@@ -865,6 +885,66 @@ static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
};
+static struct clksrc_clk exynos5_clk_dout_spi0 = {
+ .clk = {
+ .name = "dout_spi0",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_spi1 = {
+ .clk = {
+ .name = "dout_spi1",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_spi2 = {
+ .clk = {
+ .name = "dout_spi2",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .parent = &exynos5_clk_dout_spi0.clk,
+ .enable = exynos5_clksrc_mask_peric1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .parent = &exynos5_clk_dout_spi1.clk,
+ .enable = exynos5_clksrc_mask_peric1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .parent = &exynos5_clk_dout_spi2.clk,
+ .enable = exynos5_clksrc_mask_peric1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
+};
+
static struct clksrc_clk exynos5_clksrcs[] = {
{
.clk = {
@@ -977,6 +1057,9 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_dout_mmc4,
&exynos5_clk_aclk_acp,
&exynos5_clk_pclk_acp,
+ &exynos5_clk_dout_spi0,
+ &exynos5_clk_dout_spi1,
+ &exynos5_clk_dout_spi2,
};
static struct clk *exynos5_clk_cdev[] = {
@@ -994,6 +1077,9 @@ static struct clksrc_clk *exynos5_clksrc_cdev[] = {
&exynos5_clk_sclk_mmc1,
&exynos5_clk_sclk_mmc2,
&exynos5_clk_sclk_mmc3,
+ &exynos5_clk_sclk_spi0,
+ &exynos5_clk_sclk_spi1,
+ &exynos5_clk_sclk_spi2,
};
static struct clk_lookup exynos5_clk_lookup[] = {
@@ -1008,6 +1094,9 @@ static struct clk_lookup exynos5_clk_lookup[] = {
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
};
static unsigned long exynos5_epll_get_rate(struct clk *clk)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 7cdeae0..1c25dc9 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -108,6 +108,9 @@
#define EXYNOS4_PA_SPI0 0x13920000
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
+#define EXYNOS5_PA_SPI0 0x12D20000
+#define EXYNOS5_PA_SPI1 0x12D30000
+#define EXYNOS5_PA_SPI2 0x12D40000
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
@@ -177,10 +180,6 @@
#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
-#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
-#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
-#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
-
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
@@ -210,6 +209,9 @@
#define EXYNOS_PA_PDMA0 EXYNOS4_PA_PDMA0
#define EXYNOS_PA_PDMA1 EXYNOS4_PA_PDMA1
#define EXYNOS_PA_MDMA1 EXYNOS4_PA_MDMA1
+#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
+#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
+#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
#endif
#ifdef CONFIG_ARCH_EXYNOS5
@@ -219,6 +221,9 @@
#define EXYNOS_PA_PDMA0 EXYNOS5_PA_PDMA0
#define EXYNOS_PA_PDMA1 EXYNOS5_PA_PDMA1
#define EXYNOS_PA_MDMA1 EXYNOS5_PA_MDMA1
+#define S3C_PA_SPI0 EXYNOS5_PA_SPI0
+#define S3C_PA_SPI1 EXYNOS5_PA_SPI1
+#define S3C_PA_SPI2 EXYNOS5_PA_SPI2
#endif
/* Compatibility UART */
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index 113836b..b994633 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -226,12 +226,14 @@
#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C)
#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244)
#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250)
+#define EXYNOS5_CLKSRC_PERIC1 EXYNOS_CLKREG(0x10254)
#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310)
#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320)
#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C)
#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340)
#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350)
+#define EXYNOS5_CLKSRC_MASK_PERIC1 EXYNOS_CLKREG(0x10354)
#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510)
#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514)
@@ -243,6 +245,8 @@
#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550)
#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554)
#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
+#define EXYNOS5_CLKDIV_PERIC1 EXYNOS_CLKREG(0x1055C)
+#define EXYNOS5_CLKDIV_PERIC2 EXYNOS_CLKREG(0x10560)
#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
diff --git a/arch/arm/mach-exynos/mach-smdk5250.c b/arch/arm/mach-exynos/mach-smdk5250.c
index 0fe4a0b..0c55bfa 100644
--- a/arch/arm/mach-exynos/mach-smdk5250.c
+++ b/arch/arm/mach-exynos/mach-smdk5250.c
@@ -11,6 +11,9 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -18,9 +21,13 @@
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/s3c64xx-spi.h>
#include <mach/map.h>
+#include <mach/spi-clocks.h>
#include "common.h"
@@ -69,6 +76,72 @@ static struct s3c2410_uartcfg smdk5250_uartcfgs[] __initdata = {
},
};
+static struct s3c64xx_spi_csinfo spi0_csi[] = {
+ [0] = {
+ .line = EXYNOS5_GPA2(1),
+ .set_level = gpio_set_value,
+ .fb_delay = 0x2,
+ },
+};
+
+static struct spi_board_info spi0_board_info[] __initdata = {
+ {
+ .modalias = "spidev",
+ .platform_data = NULL,
+ .max_speed_hz = 10*1000*1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = &spi0_csi[0],
+ }
+};
+
+static struct s3c64xx_spi_csinfo spi1_csi[] = {
+ [0] = {
+ .line = EXYNOS5_GPA2(5),
+ .set_level = gpio_set_value,
+ .fb_delay = 0x2,
+ },
+};
+
+static struct spi_board_info spi1_board_info[] __initdata = {
+ {
+ .modalias = "spidev",
+ .platform_data = NULL,
+ .max_speed_hz = 10*1000*1000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = &spi1_csi[0],
+ }
+};
+
+static struct s3c64xx_spi_csinfo spi2_csi[] = {
+ [0] = {
+ .line = EXYNOS5_GPB1(2),
+ .set_level = gpio_set_value,
+ .fb_delay = 0x2,
+ },
+};
+
+static struct spi_board_info spi2_board_info[] __initdata = {
+ {
+ .modalias = "spidev",
+ .platform_data = NULL,
+ .max_speed_hz = 10*1000*1000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = &spi2_csi[0],
+ }
+};
+
+static struct platform_device *smdk5250_devices[] __initdata = {
+ &s3c64xx_device_spi0,
+ &s3c64xx_device_spi1,
+ &s3c64xx_device_spi2,
+};
+
static void __init smdk5250_map_io(void)
{
clk_xusbxti.rate = 24000000;
@@ -80,7 +153,40 @@ static void __init smdk5250_map_io(void)
static void __init smdk5250_machine_init(void)
{
- /* nothing here yet */
+ platform_add_devices(smdk5250_devices, ARRAY_SIZE(smdk5250_devices));
+
+ exynos_spi_clock_setup(&s3c64xx_device_spi0.dev, 0);
+ exynos_spi_clock_setup(&s3c64xx_device_spi1.dev, 1);
+ exynos_spi_clock_setup(&s3c64xx_device_spi2.dev, 2);
+
+ if (!exynos_spi_cfg_cs(spi0_csi[0].line, 0)) {
+ s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata,
+ EXYNOS_SPI_SRCCLK_SCLK, ARRAY_SIZE(spi0_csi));
+
+ spi_register_board_info(spi0_board_info,
+ ARRAY_SIZE(spi0_board_info));
+ } else
+ printk(KERN_ERR "Error requesting gpio for SPI-CH0 CS\n");
+
+
+ if (!exynos_spi_cfg_cs(spi1_csi[0].line, 1)) {
+ s3c64xx_spi1_set_platdata(&s3c64xx_spi1_pdata,
+ EXYNOS_SPI_SRCCLK_SCLK, ARRAY_SIZE(spi1_csi));
+
+ spi_register_board_info(spi1_board_info,
+ ARRAY_SIZE(spi1_board_info));
+ } else
+ printk(KERN_ERR "Error requesting gpio for SPI-CH1 CS\n");
+
+
+ if (!exynos_spi_cfg_cs(spi2_csi[0].line, 2)) {
+ s3c64xx_spi2_set_platdata(&s3c64xx_spi2_pdata,
+ EXYNOS_SPI_SRCCLK_SCLK, ARRAY_SIZE(spi2_csi));
+
+ spi_register_board_info(spi2_board_info,
+ ARRAY_SIZE(spi2_board_info));
+ } else
+ printk(KERN_ERR "Error requesting gpio for SPI-CH2 CS\n");
}
MACHINE_START(SMDK5250, "SMDK5250")
diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c
index 833ff40..60c8037 100644
--- a/arch/arm/mach-exynos/setup-spi.c
+++ b/arch/arm/mach-exynos/setup-spi.c
@@ -8,12 +8,71 @@
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
+int exynos_spi_cfg_cs(int gpio, int ch_num)
+{
+ char cs_name[16];
+
+ sprintf(cs_name, "dout_spi%d", ch_num);
+
+ if (!gpio_request(gpio, cs_name)) {
+ gpio_direction_output(gpio, 1);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(1));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ gpio_free(gpio);
+
+ return 0;
+ }
+
+ return -EIO;
+}
+
+void exynos_spi_clock_setup(struct device *spi_dev, int ch_num)
+{
+ struct clk *child_clk = NULL;
+ struct clk *parent_clk = NULL;
+ char clk_name[16];
+
+ sprintf(clk_name, "dout_spi%d", ch_num);
+ child_clk = clk_get(spi_dev, clk_name);
+
+ if (IS_ERR(child_clk)) {
+ printk(KERN_ERR "Failed to get %s clk\n", clk_name);
+ return;
+ }
+
+ parent_clk = clk_get(spi_dev, "mout_mpll_user");
+
+ if (IS_ERR(parent_clk)) {
+ printk(KERN_ERR "Failed to get mout_mpll_user clk\n");
+ goto err1;
+ }
+
+ if (clk_set_parent(child_clk, parent_clk)) {
+ printk(KERN_ERR "Unable to set parent %s of clock %s\n",
+ parent_clk->name, child_clk->name);
+ goto err2;
+ }
+
+ if (clk_set_rate(child_clk, 800 * 1000 * 1000))
+ printk(KERN_ERR "Unable to set rate of clock %s\n",
+ child_clk->name);
+
+err2:
+ clk_put(parent_clk);
+err1:
+ clk_put(child_clk);
+}
+
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x1ff,
@@ -25,10 +84,26 @@ struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ int gpio;
+
+ if (soc_is_exynos5250()) {
+ s3c_gpio_cfgpin(EXYNOS5_GPA2(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS5_GPA2(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS5_GPA2(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ for (gpio = EXYNOS5_GPA2(0); gpio < EXYNOS5_GPA2(4); gpio++)
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
+ } else {
+ s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ for (gpio = EXYNOS4_GPB(0); gpio < EXYNOS4_GPB(4); gpio++)
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
+ }
+
return 0;
}
#endif
@@ -44,10 +119,25 @@ struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ int gpio;
+
+ if (soc_is_exynos5250()) {
+ s3c_gpio_cfgpin(EXYNOS5_GPA2(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS5_GPA2(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS5_GPA2(6), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ for (gpio = EXYNOS5_GPA2(4); gpio < EXYNOS5_GPA2(8); gpio++)
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
+ } else {
+ s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ for (gpio = EXYNOS4_GPB(4); gpio < EXYNOS4_GPB(8); gpio++)
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
+ }
return 0;
}
#endif
@@ -63,10 +153,25 @@ struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
- s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
- S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
+ int gpio;
+
+ if (soc_is_exynos5250()) {
+ s3c_gpio_cfgpin(EXYNOS5_GPB1(1), S3C_GPIO_SFN(5));
+ s3c_gpio_setpull(EXYNOS5_GPB1(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS5_GPB1(3), 2,
+ S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
+
+ for (gpio = EXYNOS5_GPB1(1); gpio < EXYNOS5_GPB1(5); gpio++)
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
+ } else {
+ s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
+ s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
+ S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
+
+ for (gpio = EXYNOS4_GPC1(1); gpio < EXYNOS4_GPC1(5); gpio++)
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
+ }
return 0;
}
#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index fa95e9a..ff4c301 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -74,6 +74,10 @@ extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs);
+/* defined to setup chip select GPIO and clock of SPI */
+extern int exynos_spi_cfg_cs(int gpio, int ch_num);
+extern void exynos_spi_clock_setup(struct device *spi_dev, int ch_num);
+
/* defined by architecture to configure gpio */
extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
