On 31 January 2012 15:44, Girish K S <girish.shivananjappa@xxxxxxxxxx> wrote:
> Modified the mmc_poweroff to resume before sending the
> poweroff notification command. In sleep mode only AWAKE
> and RESET commands are allowed, so before sending the
> poweroff notification command resume from sleep mode and
> then send the notification command.
>
> POwerOff Notify is tested on a Synopsis Designware Host
> Controller(eMMC 4.5). The suspend to RAM and resume works fine.
>
> This patch is successfully applied on the Chris's mmc-next
> branch
>
> cc: Chris Ball <cjb@xxxxxxxxxx>
> Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
> Tested-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
> ---
> drivers/mmc/core/core.c | 28 ++++++++++++++++++++--------
> drivers/mmc/core/mmc.c | 17 ++++++++++++-----
> include/linux/mmc/card.h | 4 ++++
> 3 files changed, 36 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index bec0bf2..14ec575 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -1239,7 +1239,8 @@ static void mmc_poweroff_notify(struct mmc_host *host)
> int err = 0;
>
> card = host->card;
> -
> + mmc_claim_host(host);
> +
> /*
> * Send power notify command only if card
> * is mmc and notify state is powered ON
> @@ -1269,6 +1270,7 @@ static void mmc_poweroff_notify(struct mmc_host *host)
> /* Set the card state to no notification after the poweroff */
> card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
> }
> + mmc_release_host(host);
> }
>
> /*
> @@ -1327,12 +1329,28 @@ static void mmc_power_up(struct mmc_host *host)
>
> void mmc_power_off(struct mmc_host *host)
> {
> + int err = 0;
> mmc_host_clk_hold(host);
>
> host->ios.clock = 0;
> host->ios.vdd = 0;
>
> - mmc_poweroff_notify(host);
> + /*
> + * For eMMC 4.5 device send AWAKE command before
> + * POWER_OFF_NOTIFY command, because in sleep state
> + * eMMC 4.5 devices respond to only RESET and AWAKE cmd
> + */
> + if (host->card && mmc_card_is_sleep(host->card) &&
> + host->bus_ops->resume) {
> + err = host->bus_ops->resume(host);
> +
> + if (!err)
> + mmc_poweroff_notify(host);
> + else
> + pr_warning("%s: error %d during resume "
> + "(continue with poweroff sequence)\n",
> + mmc_hostname(host), err);
> + }
>
> /*
> * Reset ocr mask to be the highest possible voltage supported for
> @@ -2386,12 +2404,6 @@ int mmc_suspend_host(struct mmc_host *host)
> */
> if (mmc_try_claim_host(host)) {
> if (host->bus_ops->suspend) {
> - /*
> - * For eMMC 4.5 device send notify command
> - * before sleep, because in sleep state eMMC 4.5
> - * devices respond to only RESET and AWAKE cmd
> - */
> - mmc_poweroff_notify(host);
> err = host->bus_ops->suspend(host);
> }
> mmc_do_release_host(host);
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 2bc586b..c3f09a2 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1330,11 +1330,13 @@ static int mmc_suspend(struct mmc_host *host)
> BUG_ON(!host->card);
>
> mmc_claim_host(host);
> - if (mmc_card_can_sleep(host))
> + if (mmc_card_can_sleep(host)) {
> err = mmc_card_sleep(host);
> - else if (!mmc_host_is_spi(host))
> + if (!err)
> + mmc_card_set_sleep(host->card);
> + } else if (!mmc_host_is_spi(host))
> mmc_deselect_cards(host);
> - host->card->state &= ~MMC_STATE_HIGHSPEED;
> + host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
> mmc_release_host(host);
>
> return err;
> @@ -1354,7 +1356,11 @@ static int mmc_resume(struct mmc_host *host)
> BUG_ON(!host->card);
>
> mmc_claim_host(host);
> - err = mmc_init_card(host, host->ocr, host->card);
> + if (mmc_card_is_sleep(host->card)) {
> + err = mmc_card_awake(host);
> + mmc_card_clr_sleep(host->card);
> + } else
> + err = mmc_init_card(host, host->ocr, host->card);
> mmc_release_host(host);
>
> return err;
> @@ -1364,7 +1370,8 @@ static int mmc_power_restore(struct mmc_host *host)
> {
> int ret;
>
> - host->card->state &= ~MMC_STATE_HIGHSPEED;
> + host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
> + mmc_card_clr_sleep(host->card);
> mmc_claim_host(host);
> ret = mmc_init_card(host, host->ocr, host->card);
> mmc_release_host(host);
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index f9a0663..1a1ca71 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -219,6 +219,7 @@ struct mmc_card {
> #define MMC_CARD_SDXC (1<<6) /* card is SDXC */
> #define MMC_CARD_REMOVED (1<<7) /* card has been removed */
> #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
> +#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */
> unsigned int quirks; /* card quirks */
> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
> @@ -384,6 +385,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
> #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
> #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
> #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
> +#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP)
>
> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
> @@ -395,7 +397,9 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
> #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
> #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
> #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
> +#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP)
>
> +#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP)
> /*
> * Quirk add/remove for MMC products.
> */
> --
> 1.7.1
>
Thanks for the changes.
Reviewed-by: Saugata Das <saugata.das@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
