Mark Brown wrote:
>
> The WM8962 on Tobermory has one of the IN4 inputs connected for DC
> measurement. Tell the driver it can optimise for this mode.
>
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
> This feature is going to be merged via ASoC in 3.4 - is it OK if I apply
> this patch to the ASoC tree too? It's a one liner, I'd be astonished if
> it were to generate any conflicts.
>
Yes, would be better. If required, please go ahead with my ack:
Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> arch/arm/mach-s3c64xx/mach-crag6410-module.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-
> s3c64xx/mach-crag6410-module.c
> index 509307d..317f866 100644
> --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
> +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
> @@ -128,6 +128,7 @@ static struct wm8962_pdata wm8962_pdata __initdata = {
> 0x8000 | WM8962_GPIO_FN_DMICDAT,
> WM8962_GPIO_FN_IRQ, /* Open drain mode */
> },
> + .in4_dc_measure = true,
> };
>
> static struct wm9081_pdata wm9081_pdata __initdata = {
> --
> 1.7.9.rc1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
