oops, it's for Universal C210 so the subject should be:
ARM: SAMSUNG: Correct M-5MOLS sensor clock frequency on Universal C210 board
Should I resend or would you fix it when applying.
--
Regards,
Sylwester
On 01/25/2012 03:23 PM, Sylwester Nawrocki wrote:
> In order to keep the sensor's master clock frequency in valid range
> when FIMC parent clock is xusbxti, the specified frequency must be
> exactly 24MHZ, otherwise it's being set to too low value due to
> rounding.
>
> Signed-off-by: Sylwester Nawrocki<s.nawrocki@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park<kyungmin.park@xxxxxxxxxxx>
> ---
> arch/arm/mach-exynos/mach-universal_c210.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
> index 44fc43e..0e3aeb9 100644
> --- a/arch/arm/mach-exynos/mach-universal_c210.c
> +++ b/arch/arm/mach-exynos/mach-universal_c210.c
> @@ -973,7 +973,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
> .bus_type = FIMC_MIPI_CSI2,
> .board_info =&m5mols_board_info,
> .i2c_bus_num = 0,
> - .clk_frequency = 21600000UL,
> + .clk_frequency = 24000000UL,
> .csi_data_align = 32,
> },
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
