Add voltage regulator and platform data definitions for S5K6AAFX
image sensor driver.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-exynos/mach-universal_c210.c | 74 ++++++++++++++++++++++++++--
1 files changed, 70 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 0e01f04..44fc43e 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -46,6 +46,7 @@
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
+#include <media/s5k6aa.h>
#include "common.h"
@@ -122,8 +123,10 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
-static struct regulator_consumer_supply lp3974_buck3_consumer =
- REGULATOR_SUPPLY("vdet", "s5p-sdo");
+static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
+ REGULATOR_SUPPLY("vdet", "s5p-sdo"),
+ REGULATOR_SUPPLY("vdd_reg", "0-003c"),
+};
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
@@ -168,8 +171,8 @@ static struct regulator_init_data lp3974_buck3_data = {
.enabled = 1,
},
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck3_consumer,
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
+ .consumer_supplies = lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
@@ -302,6 +305,9 @@ static struct regulator_init_data lp3974_ldo8_data = {
.consumer_supplies = lp3974_ldo8_consumer,
};
+static struct regulator_consumer_supply lp3974_ldo9_consumer =
+ REGULATOR_SUPPLY("vddio", "0-003c");
+
static struct regulator_init_data lp3974_ldo9_data = {
.constraints = {
.name = "VCC_2.8V",
@@ -313,6 +319,8 @@ static struct regulator_init_data lp3974_ldo9_data = {
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo9_consumer,
};
static struct regulator_init_data lp3974_ldo10_data = {
@@ -411,6 +419,7 @@ static struct regulator_init_data lp3974_ldo15_data = {
};
static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+ REGULATOR_SUPPLY("vdda", "0-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
@@ -830,6 +839,28 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
+static struct regulator_consumer_supply cam_vt_dio_supply =
+ REGULATOR_SUPPLY("vdd_core", "0-003c");
+
+static struct regulator_init_data cam_vt_dio_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_vt_dio_supply,
+};
+
+static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
+ .supply_name = "CAM_VT_D_IO",
+ .microvolts = 2800000,
+ .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
+ .enable_high = 1,
+ .init_data = &cam_vt_dio_reg_init_data,
+};
+
+static struct platform_device cam_vt_dio_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
+ .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
+};
+
static struct regulator_consumer_supply cam_i_core_supply =
REGULATOR_SUPPLY("core", "0-001f");
@@ -885,6 +916,28 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
+#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
+#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
+
+static int s5k6aa_set_power(int on)
+{
+ gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+ return 0;
+}
+
+static struct s5k6aa_platform_data s5k6aa_platdata = {
+ .mclk_frequency = 21600000UL,
+ .gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
+ .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
+ .bus_type = V4L2_MBUS_PARALLEL,
+ .horiz_flip = 1,
+ .set_power = s5k6aa_set_power,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+ I2C_BOARD_INFO("S5K6AA", 0x3C),
+ .platform_data = &s5k6aa_platdata,
+};
static int m5mols_set_power(struct device *dev, int on)
{
@@ -909,6 +962,14 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &s5k6aa_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 24000000UL,
+ }, {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
@@ -927,6 +988,8 @@ static struct gpio universal_camera_gpios[] = {
{ GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+ { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
+ { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
};
static void universal_camera_init(void)
@@ -950,6 +1013,8 @@ static void universal_camera_init(void)
/* Free GPIOs controlled directly by the sensor drivers. */
gpio_free(GPIO_CAM_MEGA_nRST);
gpio_free(GPIO_CAM_8M_ISP_INT);
+ gpio_free(GPIO_CAM_VGA_NRST);
+ gpio_free(GPIO_CAM_VGA_NSTBY);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
pr_err("Camera port A setup failed\n");
@@ -988,6 +1053,7 @@ static struct platform_device *universal_devices[] __initdata = {
&exynos4_device_pd[PD_MFC],
&exynos4_device_pd[PD_LCD0],
&exynos4_device_pd[PD_CAM],
+ &cam_vt_dio_fixed_reg_dev,
&cam_i_core_fixed_reg_dev,
&cam_s_if_fixed_reg_dev,
&s5p_device_fimc_md,
--
1.7.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
