This patch adds code to resume L2 before MMU is enabled in suspend and cpuidle resume paths. s3c_cpu_resume is moved to the data section with appropriate comments. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@xxxxxxxxxx> --- arch/arm/plat-s5p/sleep.S | 44 ++++++++++++++++++++++++++++++++++++++------ 1 files changed, 38 insertions(+), 6 deletions(-) diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S index 0fd591b..006bd01 100644 --- a/arch/arm/plat-s5p/sleep.S +++ b/arch/arm/plat-s5p/sleep.S @@ -23,9 +23,18 @@ */ #include <linux/linkage.h> -#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> - .text +/* + * The following code is located into the .data section. This is to + * allow l2x0_regs_phys to be accessed with a relative load while we + * can't rely on any MMU translation. We could have put l2x0_regs_phys + * in the .text section as well, but some setups might insist on it to + * be truly read-only. (Reference from: arch/arm/kernel/sleep.S) + */ + .data + .align /* * sleep magic, to allow the bootloader to check for an valid @@ -39,11 +48,34 @@ * s3c_cpu_resume * * resume code entry for bootloader to call - * - * we must put this code here in the data segment as we have no - * other way of restoring the stack pointer after sleep, and we - * must not write to the code segment (code is read-only) */ ENTRY(s3c_cpu_resume) +#ifdef CONFIG_CACHE_L2X0 + adr r0, l2x0_regs_phys + ldr r0, [r0] + ldr r1, [r0, #L2X0_R_PHY_BASE] + ldr r2, [r1, #L2X0_CTRL] + tst r2, #0x1 + bne resume_l2on + ldr r2, [r0, #L2X0_R_AUX_CTRL] + str r2, [r1, #L2X0_AUX_CTRL] + ldr r2, [r0, #L2X0_R_TAG_LATENCY] + str r2, [r1, #L2X0_TAG_LATENCY_CTRL] + ldr r2, [r0, #L2X0_R_DATA_LATENCY] + str r2, [r1, #L2X0_DATA_LATENCY_CTRL] + ldr r2, [r0, #L2X0_R_PREFETCH_CTRL] + str r2, [r1, #L2X0_PREFETCH_CTRL] + ldr r2, [r0, #L2X0_R_PWR_CTRL] + str r2, [r1, #L2X0_POWER_CTRL] + mov r2, #1 + str r2, [r1, #L2X0_CTRL] +resume_l2on: +#endif b cpu_resume +ENDPROC(s3c_cpu_resume) +#ifdef CONFIG_CACHE_L2X0 + .globl l2x0_regs_phys +l2x0_regs_phys: + .long 0 +#endif -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |