Hi Girish, small style comments,
On Fri, Dec 23 2011, Girish K S wrote:
> This patch adds the support of the HS200 bus speed for eMMC 4.5 devices.
> The eMMC 4.5 devices have support for 200MHz bus speed. The function
> prototype of the tuning function is modified to handle the tuning command
> number which is different in sd and mmc case.
>
> cc: Chris Ball <cjb@xxxxxxxxxx>
> Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
> Signed-off-by: Philip Rakity <prakity@xxxxxxxxxxx>
> ---
> drivers/mmc/core/bus.c | 3 +-
> drivers/mmc/core/debugfs.c | 3 +
> drivers/mmc/core/mmc.c | 163 +++++++++++++++++++++++++++++++++++++++++---
> drivers/mmc/core/sd.c | 3 +-
> drivers/mmc/core/sdio.c | 4 +-
> include/linux/mmc/card.h | 3 +
> include/linux/mmc/host.h | 11 +++-
> include/linux/mmc/mmc.h | 66 +++++++++++++++++-
> 8 files changed, 242 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
> index f8a228a..5d011a3 100644
> --- a/drivers/mmc/core/bus.c
> +++ b/drivers/mmc/core/bus.c
> @@ -303,10 +303,11 @@ int mmc_add_card(struct mmc_card *card)
> mmc_card_ddr_mode(card) ? "DDR " : "",
> type);
> } else {
> - printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
> + pr_info("%s: new %s%s%s%s card at address %04x\n",
> mmc_hostname(card->host),
> mmc_card_uhs(card) ? "ultra high speed " :
> (mmc_card_highspeed(card) ? "high speed " : ""),
> + (mmc_card_hs200(card) ? "HS200 " : ""),
> mmc_card_ddr_mode(card) ? "DDR " : "",
> type, card->rca);
> }
> diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
> index 027615d..9ab5b17 100644
> --- a/drivers/mmc/core/debugfs.c
> +++ b/drivers/mmc/core/debugfs.c
> @@ -135,6 +135,9 @@ static int mmc_ios_show(struct seq_file *s, void *data)
> case MMC_TIMING_UHS_DDR50:
> str = "sd uhs DDR50";
> break;
> + case MMC_TIMING_MMC_HS200:
> + str = "mmc high-speed SDR200";
> + break;
> default:
> str = "invalid";
> break;
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index f0a9f1f..583cb42 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -286,6 +286,27 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
> }
> card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
> switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
> + case EXT_CSD_CARD_TYPE_SDR_ALL:
> + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V:
> + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V:
> + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
> + break;
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
> + break;
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
> + break;
> case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
> EXT_CSD_CARD_TYPE_26:
> card->ext_csd.hs_max_dtr = 52000000;
> @@ -700,6 +721,79 @@ static int mmc_select_powerclass(struct mmc_card *card,
> }
>
> /*
> + * Selects the desired buswidth and switch to the HS200 mode
> + * if bus width set without error
> + */
> +static int mmc_select_hs200(struct mmc_card *card)
> +{
> + int idx, err = 0;
> + struct mmc_host *host;
> + static unsigned ext_csd_bits[] = {
> + EXT_CSD_BUS_WIDTH_4,
> + EXT_CSD_BUS_WIDTH_8,
> + };
> + static unsigned bus_widths[] = {
> + MMC_BUS_WIDTH_4,
> + MMC_BUS_WIDTH_8,
> + };
> +
> + BUG_ON(!card);
> +
> + host = card->host;
> +
> + if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V)
> + && (host->caps2 & MMC_CAP2_HS200_1_2V_SDR))
A continuation (&&, ||..) should go on the end of the first line.
Also, & has higher precedence than &&, so parens are unneeded.
if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
> + if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0))
> + err = mmc_set_signal_voltage(host,
> + MMC_SIGNAL_VOLTAGE_180, 0);
> +
> + /* If fails try again during next card power cycle */
> + if (err)
> + goto err;
> +
> + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0;
Wouldn't "idx = host->caps & MMC_CAP_8_BIT_DATA;" do the same thing?
> +
> + /*
> + * Unlike SD, MMC cards dont have a configuration register to notify
> + * supported bus width. So bus test command should be run to identify
> + * the supported bus width or compare the ext csd values of current
> + * bus width and ext csd values of 1 bit mode read earlier.
> + */
> + for (; idx >= 0; idx--) {
I don't understand the purpose of this loop. idx can only be 0 or 1,
right? Why would you go through the loop more than once? Why not say
"if (idx) {"?
> +
> + /*
> + * Host is capable of 8bit transfer, then switch
> + * the device to work in 8bit transfer mode. If the
> + * mmc switch command returns error then switch to
> + * 4bit transfer mode. On success set the corresponding
> + * bus width on the host.
> + */
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_BUS_WIDTH,
> + ext_csd_bits[idx],
> + card->ext_csd.generic_cmd6_time);
> + if (err)
> + continue;
> +
> + mmc_set_bus_width(card->host, bus_widths[idx]);
> +
> + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
> + err = mmc_compare_ext_csds(card, bus_widths[idx]);
> + else
> + err = mmc_bus_test(card, bus_widths[idx]);
> + if (!err)
> + break;
> + }
> +
> + /* switch to HS200 mode if bus width set successfully */
> + if (!err)
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_HS_TIMING, 2, 0);
> +err:
> + return err;
> +}
> +
> +/*
> * Handle the detection and initialisation of a card.
> *
> * In the case of a resume, "oldcard" will contain the card
> @@ -905,11 +999,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> /*
> * Activate high speed (if supported)
> */
> - if ((card->ext_csd.hs_max_dtr != 0) &&
> - (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
> - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> - EXT_CSD_HS_TIMING, 1,
> - card->ext_csd.generic_cmd6_time);
> + if (card->ext_csd.hs_max_dtr != 0) {
> + err = 0;
> + if ((card->ext_csd.hs_max_dtr > 52000000) &&
> + (host->caps2 & MMC_CAP2_HS200))
No need for these parentheses.
if (card->ext_csd.hs_max_dtr > 52000000 &&
host->caps2 & MMC_CAP2_HS200)
> + err = mmc_select_hs200(card);
> + else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_HS_TIMING, 1, 0);
> +
> if (err && err != -EBADMSG)
> goto free_card;
>
> @@ -918,8 +1016,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> mmc_hostname(card->host));
> err = 0;
> } else {
> - mmc_card_set_highspeed(card);
> - mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
> + if ((card->ext_csd.hs_max_dtr > 52000000) &&
> + (host->caps2 & MMC_CAP2_HS200)) {
Same as above.
> + mmc_card_set_hs200(card);
> + mmc_set_timing(card->host,
> + MMC_TIMING_MMC_HS200);
> + } else {
> + mmc_card_set_highspeed(card);
> + mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
> + }
> }
> }
>
> @@ -944,7 +1049,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> */
> max_dtr = (unsigned int)-1;
>
> - if (mmc_card_highspeed(card)) {
> + if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
> if (max_dtr > card->ext_csd.hs_max_dtr)
> max_dtr = card->ext_csd.hs_max_dtr;
> } else if (max_dtr > card->csd.max_dtr) {
> @@ -970,9 +1075,49 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> }
>
> /*
> + * Indicate HS200 SDR mode (if supported).
> + */
> + if (mmc_card_hs200(card)) {
> + u32 ext_csd_bits;
> + u32 bus_width = card->host->ios.bus_width;
> +
> + /*
> + * For devices supporting HS200 mode, the bus width has
> + * to be set before executing the tuning function. If
> + * set before tuning, then device will respond with CRC
> + * errors for responses on CMD line. So for HS200 the
> + * sequence will be
> + * 1. set bus width 4bit / 8 bit (1 bit not supported)
> + * 2. switch to HS200 mode
> + * 3. set the clock to > 52Mhz <=200MHz and
> + * 4. execute tuning for HS200
> + */
> + if ((host->caps2 & MMC_CAP2_HS200) &&
> + card->host->ops->execute_tuning)
> + err = card->host->ops->execute_tuning(card->host,
> + MMC_SEND_TUNING_BLOCK_HS200);
One less tab here.
> + if (err) {
> + pr_warning("tuning execution failed\n");
> + goto err;
> + }
Add the mmc_hostname().
> +
> + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
> + EXT_CSD_BUS_WIDTH_8 :
> + EXT_CSD_BUS_WIDTH_4;
ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
> + err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
> + if (err) {
> + pr_err("%s: power class selection to bus width"
> + "%d failed\n", mmc_hostname(card->host),
> + 1 << bus_width);
I think using one line for the format string is okay here, even though
it will go past 80 chars. It's easier to grep for strings that way.
pr_err("%s: power class selection to bus width %d failed\n",
mmc_hostname(card->host), 1 << bus_width);
> + goto err;
> + }
> + }
> +
> + /*
> * Activate wide bus and DDR (if supported).
> */
> - if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
> + if (!mmc_card_hs200(card) &&
> + (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
> (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
> static unsigned ext_csd_bits[][2] = {
> { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 6f27d35..a775131 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -661,7 +661,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
>
> /* SPI mode doesn't define CMD19 */
> if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
> - err = card->host->ops->execute_tuning(card->host);
> + err = card->host->ops->execute_tuning(card->host, \
> + MMC_SEND_TUNING_BLOCK);
\ is unnecessary here.
>
> out:
> kfree(status);
> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
> index b77f770..bd7bacc 100644
> --- a/drivers/mmc/core/sdio.c
> +++ b/drivers/mmc/core/sdio.c
> @@ -14,6 +14,7 @@
>
> #include <linux/mmc/host.h>
> #include <linux/mmc/card.h>
> +#include <linux/mmc/mmc.h>
> #include <linux/mmc/sdio.h>
> #include <linux/mmc/sdio_func.h>
> #include <linux/mmc/sdio_ids.h>
> @@ -556,7 +557,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
>
> /* Initialize and start re-tuning timer */
> if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
> - err = card->host->ops->execute_tuning(card->host);
> + err = card->host->ops->execute_tuning(card->host,
> + MMC_SEND_TUNING_BLOCK);
>
> out:
>
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 9478a6b..9f22ba5 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -216,6 +216,7 @@ struct mmc_card {
> #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */
> #define MMC_CARD_SDXC (1<<6) /* card is SDXC */
> #define MMC_CARD_REMOVED (1<<7) /* card has been removed */
> +#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
> unsigned int quirks; /* card quirks */
> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
> @@ -374,6 +375,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
> #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
> #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
> #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
> +#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200)
> #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
> #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
> #define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
> @@ -384,6 +386,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
> #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
> +#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200)
> #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
> #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
> #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 9a03d03..606c8c3 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -56,10 +56,13 @@ struct mmc_ios {
> #define MMC_TIMING_UHS_SDR50 3
> #define MMC_TIMING_UHS_SDR104 4
> #define MMC_TIMING_UHS_DDR50 5
> +#define MMC_TIMING_MMC_HS200 6
>
> #define MMC_SDR_MODE 0
> #define MMC_1_2V_DDR_MODE 1
> #define MMC_1_8V_DDR_MODE 2
> +#define MMC_1_2V_SDR_MODE 3
> +#define MMC_1_8V_SDR_MODE 4
>
> unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */
>
> @@ -148,7 +151,9 @@ struct mmc_host_ops {
> void (*init_card)(struct mmc_host *host, struct mmc_card *card);
>
> int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
> - int (*execute_tuning)(struct mmc_host *host);
> +
> + /* The tuning command opcode value is different for SD and eMMC cards */
> + int (*execute_tuning)(struct mmc_host *host, u32 opcode);
> void (*enable_preset_value)(struct mmc_host *host, bool enable);
> int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
> void (*hw_reset)(struct mmc_host *host);
> @@ -242,6 +247,10 @@ struct mmc_host {
> #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */
> #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */
> #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */
> +#define MMC_CAP2_HS200_1_8V_SDR (1 << 4) /* can support */
> +#define MMC_CAP2_HS200_1_2V_SDR (1 << 5) /* can support */
> +#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
> + MMC_CAP2_HS200_1_2V_SDR)
>
> mmc_pm_flag_t pm_caps; /* supported pm features */
> unsigned int power_notify_type;
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 665548e..2c8cc69 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -51,6 +51,7 @@
> #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
> #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
> #define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */
> +#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
>
> /* class 3 */
> #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
> @@ -339,13 +340,76 @@ struct _mmc_csd {
>
> #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
> #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
> -#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */
> +#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */
> #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
> /* DDR mode @1.8V or 3V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
> /* DDR mode @1.2V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
> | EXT_CSD_CARD_TYPE_DDR_1_2V)
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */
> + /* SDR mode @1.2V I/O */
> +
> +#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_SDR_1_2V)
> +
Normal kernel coding style is:
#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V | \
EXT_CSD_CARD_TYPE_SDR_1_2V)
> +#define EXT_CSD_CARD_TYPE_SDR_ALL (EXT_CSD_CARD_TYPE_SDR_200 \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_ALL (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_ALL (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_DDR_1_8V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_DDR_1_8V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_DDR_1_2V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_DDR_1_2V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_DDR_52 \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_DDR_52 \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_200 \
> + | EXT_CSD_CARD_TYPE_DDR_1_8V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_200 \
> + | EXT_CSD_CARD_TYPE_DDR_1_2V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52 (EXT_CSD_CARD_TYPE_SDR_200 \
> + | EXT_CSD_CARD_TYPE_DDR_52 \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
>
> #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
> #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
Thanks,
- Chris.
--
Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
