Jingoo Han wrote:
>
> By using gpio_request_one it is possible to set the direction
> and initial value in one shot. Thus, using gpio_request_one can
> make the code simpler.
>
> Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> ---
> arch/arm/mach-exynos/mach-nuri.c | 9 ++-------
> arch/arm/mach-exynos/mach-smdkv310.c | 4 +---
> arch/arm/mach-exynos/mach-universal_c210.c | 10 +++-------
> 3 files changed, 6 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-
> nuri.c
> index 236bbe1..205dfed 100644
> --- a/arch/arm/mach-exynos/mach-nuri.c
> +++ b/arch/arm/mach-exynos/mach-nuri.c
> @@ -247,13 +247,8 @@ static void nuri_lcd_power_on(struct plat_lcd_data
> *pd, unsigned int power)
>
> static int nuri_bl_init(struct device *dev)
> {
> - int ret, gpio = EXYNOS4_GPE2(3);
> -
> - ret = gpio_request(gpio, "LCD_LDO_EN");
> - if (!ret)
> - gpio_direction_output(gpio, 0);
> -
> - return ret;
> + return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
> + "LCD_LD0_EN");
> }
>
> static int nuri_bl_notify(struct device *dev, int brightness)
> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-
> exynos/mach-smdkv310.c
> index cec2afa..cbf31bd 100644
> --- a/arch/arm/mach-exynos/mach-smdkv310.c
> +++ b/arch/arm/mach-exynos/mach-smdkv310.c
> @@ -129,9 +129,7 @@ static void lcd_lte480wv_set_power(struct
> plat_lcd_data *pd,
> gpio_free(EXYNOS4_GPD0(1));
> #endif
> /* fire nRESET on power up */
> - gpio_request(EXYNOS4_GPX0(6), "GPX0");
> -
> - gpio_direction_output(EXYNOS4_GPX0(6), 1);
> + gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH,
> "GPX0");
> mdelay(100);
>
> gpio_set_value(EXYNOS4_GPX0(6), 0);
> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-
> exynos/mach-universal_c210.c
> index a2a177f..0a04cd6 100644
> --- a/arch/arm/mach-exynos/mach-universal_c210.c
> +++ b/arch/arm/mach-exynos/mach-universal_c210.c
> @@ -608,8 +608,7 @@ static void __init universal_tsp_init(void)
>
> /* TSP_LDO_ON: XMDMADDR_11 */
> gpio = EXYNOS4_GPE2(3);
> - gpio_request(gpio, "TSP_LDO_ON");
> - gpio_direction_output(gpio, 1);
> + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
> gpio_export(gpio, 0);
>
> /* TSP_INT: XMDMADDR_7 */
> @@ -669,8 +668,7 @@ static void __init universal_touchkey_init(void)
> i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
>
> gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
> - gpio_request(gpio, "3_TOUCH_EN");
> - gpio_direction_output(gpio, 1);
> + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
> }
>
> static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
> @@ -1000,9 +998,7 @@ static void __init universal_map_io(void)
> void s5p_tv_setup(void)
> {
> /* direct HPD to HDMI chip */
> - gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
> -
> - gpio_direction_input(EXYNOS4_GPX3(7));
> + gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
> s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
> s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
>
> --
> 1.7.1
OK, will apply.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
