Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) is bothersome to maintain and likely to lead to merge conflicts. This patch moves the knowledge of which platforms have a L2x0 or PL310 cache controller to the individual machines. To enable this, a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow machines to indicate that they may have such a cache controller independently of each other. Boards/SoCs which cannot reliably operate without the L2 cache controller support will need to select CACHE_L2X0 directly from their own Kconfigs instead. This applies to some TrustZone-enabled boards where Linux runs in the Normal World, for example. Signed-off-by: Dave Martin <dave.martin@xxxxxxxxxx> --- arch/arm/Kconfig | 8 ++++++++ arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-realview/Kconfig | 5 +++++ arch/arm/mach-vexpress/Kconfig | 1 + arch/arm/mm/Kconfig | 15 ++++++++------- arch/arm/plat-mxc/Kconfig | 1 + 7 files changed, 25 insertions(+), 7 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44789ef..16a4b9e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -344,6 +344,7 @@ config ARCH_HIGHBANK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU + select MIGHT_HAVE_CACHE_L2X0 select USE_OF help Support for the Calxeda Highbank SoC based boards. @@ -361,6 +362,7 @@ config ARCH_CNS3XXX select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC + select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help @@ -381,6 +383,7 @@ config ARCH_PRIMA2 select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP + select MIGHT_HAVE_CACHE_L2X0 select USE_OF select ZONE_DMA help @@ -633,6 +636,7 @@ config ARCH_TEGRA select GENERIC_GPIO select HAVE_CLK select HAVE_SCHED_CLOCK + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -703,6 +707,7 @@ config ARCH_SHMOBILE select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select SPARSE_IRQ select MULTI_IRQ_HANDLER @@ -904,6 +909,7 @@ config ARCH_U8500 select CLKDEV_LOOKUP select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ + select MIGHT_HAVE_CACHE_L2X0 help Support for ST-Ericsson's Ux500 architecture @@ -914,6 +920,7 @@ config ARCH_NOMADIK select CPU_ARM926T select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson @@ -973,6 +980,7 @@ config ARCH_ZYNQ select ARM_GIC select ARM_AMBA select ICST + select MIGHT_HAVE_CACHE_L2X0 select USE_OF help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 724ec0f..7f2347b 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -17,6 +17,7 @@ choice config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5034147..c841578 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,6 +44,7 @@ config ARCH_OMAP4 select CPU_V7 select ARM_GIC select LOCAL_TIMERS if SMP + select MIGHT_HAVE_CACHE_L2X0 select PL310_ERRATA_588369 select PL310_ERRATA_727915 select ARM_ERRATA_720789 diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dba6d0c..3dd620f 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the Cortex-A9MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -21,6 +22,7 @@ config REALVIEW_EB_ARM11MP depends on MACH_REALVIEW_EB select CPU_V6K select ARCH_HAS_BARRIERS if SMP + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the ARM11MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -39,6 +41,7 @@ config MACH_REALVIEW_PB11MP select CPU_V6K select ARM_GIC select HAVE_PATA_PLATFORM + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_BARRIERS if SMP help Include support for the ARM(R) RealView(R) Platform Baseboard for @@ -51,6 +54,7 @@ config MACH_REALVIEW_PB1176 select CPU_V6 select ARM_GIC select HAVE_TCM + select MIGHT_HAVE_CACHE_L2X0 help Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. @@ -78,6 +82,7 @@ config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" select ARM_GIC select HAVE_PATA_PLATFORM + select MIGHT_HAVE_CACHE_L2X0 select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9311484..a8aefc8 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4 select ARM_ERRATA_720789 select ARM_ERRATA_751472 select ARM_ERRATA_753970 + select MIGHT_HAVE_CACHE_L2X0 endmenu diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 67f75a0..d92aa3b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -816,14 +816,15 @@ config CACHE_FEROCEON_L2_WRITETHROUGH Say Y here to use the Feroceon L2 cache in writethrough mode. Unless you specifically require this, say N for writeback mode. +config MIGHT_HAVE_CACHE_L2X0 + bool + help + This option should be selected by machines which have a L2x0 + or PL310 cache controller. + config CACHE_L2X0 - bool "Enable the L2x0 outer cache controller" - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ - ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK - default y + bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0 + default MIGHT_HAVE_CACHE_L2X0 select OUTER_CACHE select OUTER_CACHE_SYNC help diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b3a1f2b..b30708e 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7 bool "i.MX3, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT + select MIGHT_HAVE_CACHE_L2X0 help This enables support for systems based on the Freescale i.MX3 and i.MX6 family. -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |