By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
---
arch/arm/mach-exynos/mach-nuri.c | 4 +---
arch/arm/mach-exynos/mach-smdkv310.c | 4 +---
arch/arm/mach-exynos/mach-universal_c210.c | 10 +++-------
3 files changed, 5 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe1..c96de1f 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -249,9 +249,7 @@ static int nuri_bl_init(struct device *dev)
{
int ret, gpio = EXYNOS4_GPE2(3);
- ret = gpio_request(gpio, "LCD_LDO_EN");
- if (!ret)
- gpio_direction_output(gpio, 0);
+ ret = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, "LCD_LD0_EN");
return ret;
}
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afa..cbf31bd 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -129,9 +129,7 @@ static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
gpio_free(EXYNOS4_GPD0(1));
#endif
/* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
mdelay(100);
gpio_set_value(EXYNOS4_GPX0(6), 0);
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177f..0a04cd6 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -608,8 +608,7 @@ static void __init universal_tsp_init(void)
/* TSP_LDO_ON: XMDMADDR_11 */
gpio = EXYNOS4_GPE2(3);
- gpio_request(gpio, "TSP_LDO_ON");
- gpio_direction_output(gpio, 1);
+ gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
gpio_export(gpio, 0);
/* TSP_INT: XMDMADDR_7 */
@@ -669,8 +668,7 @@ static void __init universal_touchkey_init(void)
i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
- gpio_request(gpio, "3_TOUCH_EN");
- gpio_direction_output(gpio, 1);
+ gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
}
static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
@@ -1000,9 +998,7 @@ static void __init universal_map_io(void)
void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
- gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
-
- gpio_direction_input(EXYNOS4_GPX3(7));
+ gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
