Re: [PATCH 3/4] rtc-s3c: add variants for S3C2443 and S3C2416

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9 December 2011 15:20, Heiko Stübner <heiko@xxxxxxxxx> wrote:
> Especially the TICNT registers are different from the two rtc types
> that currently exists.
>
> Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
> ---
>  arch/arm/plat-samsung/include/plat/regs-rtc.h |   24 +++++++++++++
>  drivers/rtc/rtc-s3c.c                         |   44 ++++++++++++++++++++++--
>  2 files changed, 64 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
> index d9d9bdc..fa6066a 100644
> --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
> +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
> @@ -23,14 +23,33 @@
>  #define S3C2410_RTCCON_CLKSEL  (1 << 1)
>  #define S3C2410_RTCCON_CNTSEL  (1 << 2)
>  #define S3C2410_RTCCON_CLKRST  (1 << 3)
> +#define S3C2443_RTCCON_TICSEL  (1 << 4)
>  #define S3C64XX_RTCCON_TICEN   (1 << 8)
>
>  #define S3C64XX_RTCCON_TICMSK  (0xF << 7)
>  #define S3C64XX_RTCCON_TICSHT  (7)
>
> +#define S3C2416_RTCCON_TICMSK  (0x1F << 7)
> +
>  #define S3C2410_TICNT          S3C2410_RTCREG(0x44)
>  #define S3C2410_TICNT_ENABLE   (1 << 7)
>
> +/* S3C2443: tick count is 15 bit wide
> + * TICNT[6:0] contains upper 7 bits
> + * TICNT1[7:0] contains lower 8 bits
> + */
> +#define S3C2443_TICNT_PART(x)  ((x & 0x7f00) >> 8)
> +#define S3C2443_TICNT1         S3C2410_RTCREG(0x4C)
> +#define S3C2443_TICNT1_PART(x) (x & 0xff)
> +
> +/* S3C2416: tick count is 32 bit wide
> + * TICNT[6:0] contains bits [14:8]
> + * TICNT1[7:0] contains lower 8 bits
> + * TICNT2[16:0] contains upper 17 bits
> + */
> +#define S3C2416_TICNT2         S3C2410_RTCREG(0x48)
> +#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15)
> +
>  #define S3C2410_RTCALM         S3C2410_RTCREG(0x50)
>  #define S3C2410_RTCALM_ALMEN   (1 << 6)
>  #define S3C2410_RTCALM_YEAREN  (1 << 5)
> @@ -63,4 +82,9 @@
>  #define S3C2410_RTCMON         S3C2410_RTCREG(0x84)
>  #define S3C2410_RTCYEAR                S3C2410_RTCREG(0x88)
>
> +#define S3C2443_TICKCNT                S3C2410_RTCREG(0x90)
> +
> +#define S3C2443_RTCLBAT                S3C2410_RTCREG(0x94)
> +#define S3C2443_RTCLBAT_CLEAR  (1 << 0)
> +
>  #endif /* __ASM_ARCH_REGS_RTC_H */
> diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
> index 71807a6..2a0692e 100644
> --- a/drivers/rtc/rtc-s3c.c
> +++ b/drivers/rtc/rtc-s3c.c
> @@ -35,6 +35,8 @@
>
>  enum s3c_cpu_type {
>        TYPE_S3C2410,
> +       TYPE_S3C2443,
> +       TYPE_S3C2416,
>        TYPE_S3C64XX,
>  };
>
> @@ -132,6 +134,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
>        struct platform_device *pdev = to_platform_device(dev);
>        struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
>        unsigned int tmp = 0;
> +       int val;
>
>        if (!is_power_of_2(freq))
>                return -EINVAL;
> @@ -139,12 +142,23 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
>        clk_enable(rtc_clk);
>        spin_lock_irq(&s3c_rtc_pie_lock);
>
> -       if (s3c_rtc_cpu_type == TYPE_S3C2410) {
> +       if (s3c_rtc_cpu_type != TYPE_S3C64XX) {
>                tmp = readb(s3c_rtc_base + S3C2410_TICNT);
>                tmp &= S3C2410_TICNT_ENABLE;
>        }
>
> -       tmp |= (rtc_dev->max_user_freq / freq)-1;
> +       val = (rtc_dev->max_user_freq / freq) - 1;
> +
> +       if (s3c_rtc_cpu_type == TYPE_S3C2443) {
> +               tmp |= S3C2443_TICNT_PART(val);
> +               writel(S3C2443_TICNT1_PART(val), s3c_rtc_base + S3C2443_TICNT1);
> +       } else if (s3c_rtc_cpu_type == TYPE_S3C2416) {
> +               tmp |= S3C2443_TICNT_PART(val);
> +               writel(S3C2443_TICNT1_PART(val), s3c_rtc_base + S3C2443_TICNT1);
> +               writel(S3C2416_TICNT2_PART(val), s3c_rtc_base + S3C2416_TICNT2);
> +       } else {
> +               tmp |= val;
> +       }

Can this be changed to:

if (s3c_rtc_cpu_type == TYPE_S3C2443 || (s3c_rtc_cpu_type == TYPE_S3C2416) {
       tmp |= S3C2443_TICNT_PART(val);
       writel(S3C2443_TICNT1_PART(val), s3c_rtc_base + S3C2443_TICNT1);
       if (s3c_rtc_cpu_type == TYPE_S3C2416)
                writel(S3C2416_TICNT2_PART(val), s3c_rtc_base + S3C2416_TICNT2);
} else {
      tmp |= val;
}

>
>        writel(tmp, s3c_rtc_base + S3C2410_TICNT);
>        spin_unlock_irq(&s3c_rtc_pie_lock);
> @@ -371,7 +385,9 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
>                tmp &= ~S3C2410_RTCCON_RTCEN;
>                writew(tmp, base + S3C2410_RTCCON);
>
> -               if (s3c_rtc_cpu_type == TYPE_S3C2410) {
> +               if (s3c_rtc_cpu_type == TYPE_S3C2410 ||
> +                   s3c_rtc_cpu_type == TYPE_S3C2443 ||
> +                   s3c_rtc_cpu_type == TYPE_S3C2416) {
>                        tmp = readb(base + S3C2410_TICNT);
>                        tmp &= ~S3C2410_TICNT_ENABLE;
>                        writeb(tmp, base + S3C2410_TICNT);
> @@ -441,6 +457,7 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
>        const struct of_device_id *match;
>  #endif
>        int ret;
> +       int tmp;
>
>        pr_debug("%s: probe=%p\n", __func__, pdev);
>
> @@ -543,11 +560,18 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
>                dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
>        }
>
> -       if (s3c_rtc_cpu_type == TYPE_S3C64XX)
> +       if (s3c_rtc_cpu_type != TYPE_S3C2410)
>                rtc->max_user_freq = 32768;
>        else
>                rtc->max_user_freq = 128;
>
> +       if (s3c_rtc_cpu_type == TYPE_S3C2443 ||
> +            s3c_rtc_cpu_type == TYPE_S3C2416) {
> +               tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
> +               tmp |= S3C2443_RTCCON_TICSEL;
> +               writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
> +       }
> +
>        platform_set_drvdata(pdev, rtc);
>
>        s3c_rtc_setfreq(&pdev->dev, 1);
> @@ -652,6 +676,12 @@ static const struct of_device_id s3c_rtc_dt_match[] = {
>                .compatible = "samsung,s3c2410-rtc"
>                .data = TYPE_S3C2410,
>        }, {
> +               .compatible = "samsung,s3c2443-rtc"
> +               .data = TYPE_S3C2443,
> +       }, {
> +               .compatible = "samsung,s3c2416-rtc"
> +               .data = TYPE_S3C2416,
> +       }, {
>                .compatible = "samsung,s3c6410-rtc"
>                .data = TYPE_S3C64XX,
>        },
> @@ -667,6 +697,12 @@ static struct platform_device_id s3c_rtc_driver_ids[] = {
>                .name           = "s3c2410-rtc",
>                .driver_data    = TYPE_S3C2410,
>        }, {
> +               .name           = "s3c2443-rtc",
> +               .driver_data    = TYPE_S3C2443,
> +       }, {
> +               .name           = "s3c2416-rtc",
> +               .driver_data    = TYPE_S3C2416,
> +       }, {
>                .name           = "s3c64xx-rtc",
>                .driver_data    = TYPE_S3C64XX,
>        },
> --
> 1.7.5.4

Reviewed device tree related changes in this patch.

Regards,
Thomas.

>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux