Padmavathi Venna wrote: > > SPI platform devices are defined in respective machine folder of > Samsung S3C64XX and S5P series SoCs.This patchset moves S3C64XX > and S5P series of SPI platform devices to a common place plat-samsung. > This patchset also creates SPI setup files for GPIO configurations and > platform data initialization. > > V2 Changes: > Platform data initialized in a centralized setup file as suggested-by > Mark Brown > SPI Controller number is added in SPI controller defining structure. > > Padmavathi Venna (6): > ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung > ARM: S3C64XX: Modified files for SPI consolidation work > ARM: S5PC100: Modified files for SPI consolidation work. > ARM: S5P64X0: Modified files for SPI consolidation work > ARM: S5PV210: Modified files for SPI consolidation work > > The following patch make the corresponding SPI changes required for > Wolfson Cragganmore S3C6410 variant. This patch is only build tested. > > ARM: S3C64XX: Modified according to SPI consolidation work. > > arch/arm/mach-s3c64xx/Kconfig | 8 +- > arch/arm/mach-s3c64xx/Makefile | 2 +- > arch/arm/mach-s3c64xx/dev-spi.c | 172 ----------------- > arch/arm/mach-s3c64xx/include/mach/map.h | 2 + > arch/arm/mach-s3c64xx/setup-spi.c | 47 +++++ > arch/arm/mach-s5p64x0/Kconfig | 7 +- > arch/arm/mach-s5p64x0/Makefile | 2 +- > arch/arm/mach-s5p64x0/dev-spi.c | 218 --------------------- > arch/arm/mach-s5p64x0/include/mach/map.h | 3 + > arch/arm/mach-s5p64x0/setup-spi.c | 57 ++++++ > arch/arm/mach-s5pc100/Kconfig | 5 + > arch/arm/mach-s5pc100/Makefile | 2 +- > arch/arm/mach-s5pc100/dev-spi.c | 220 ---------------------- > arch/arm/mach-s5pc100/include/mach/map.h | 3 + > arch/arm/mach-s5pc100/setup-spi.c | 68 +++++++ > arch/arm/mach-s5pv210/Kconfig | 5 + > arch/arm/mach-s5pv210/Makefile | 2 +- > arch/arm/mach-s5pv210/dev-spi.c | 169 ----------------- > arch/arm/mach-s5pv210/include/mach/map.h | 2 + > arch/arm/mach-s5pv210/setup-spi.c | 53 +++++ > arch/arm/plat-samsung/Kconfig | 14 ++- > arch/arm/plat-samsung/devs.c | 106 +++++++++++ > arch/arm/plat-samsung/include/plat/devs.h | 8 +- > arch/arm/plat-samsung/include/plat/s3c64xx-spi.h | 20 ++- > 24 files changed, 395 insertions(+), 800 deletions(-) > delete mode 100644 arch/arm/mach-s3c64xx/dev-spi.c > create mode 100644 arch/arm/mach-s3c64xx/setup-spi.c > delete mode 100644 arch/arm/mach-s5p64x0/dev-spi.c > create mode 100644 arch/arm/mach-s5p64x0/setup-spi.c > delete mode 100644 arch/arm/mach-s5pc100/dev-spi.c > create mode 100644 arch/arm/mach-s5pc100/setup-spi.c > delete mode 100644 arch/arm/mach-s5pv210/dev-spi.c > create mode 100644 arch/arm/mach-s5pv210/setup-spi.c Hi Padma, Sorry for late response. Basically, looks good to me, but need to re-submit because of following. You need to just move 'resource's and 'platform_device's from each dev-spi.c file into plat-samsung/devs.c in your 1st patch then move 'gpio setup' to each setup-spi.c files in other patches. I think, above ensures bisect of your patches :) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |