Re: [PATCH V5] mmc: core: HS200 mode support for eMMC 4.5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1 December 2011 15:33, Subhash Jadavani <subhashj@xxxxxxxxxxxxxx> wrote:
> Hi Girish,
>
>> -----Original Message-----
>> From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc-
>> owner@xxxxxxxxxxxxxxx] On Behalf Of Girish K S
>> Sent: Wednesday, November 30, 2011 2:24 PM
>> To: linux-mmc@xxxxxxxxxxxxxxx
>> Cc: patches@xxxxxxxxxx; linux-samsung-soc@xxxxxxxxxxxxxxx;
>> subhashj@xxxxxxxxxxxxxx; Girish K S; Chris Ball
>> Subject: [PATCH V5] mmc: core: HS200 mode support for eMMC 4.5
>>
>> This patch adds the support of the HS200 bus speed for eMMC 4.5
>> devices.
>> The eMMC 4.5 devices have support for 200MHz bus speed.The mmc core and
>> host modules have been touched to add support for this module.
>>
>> It is necessary to know the card type in the sdhci.c file to add
>> support
>> for eMMC tuning function. So card.h file is included to import the card
>> data structure.
>>
>> cc: Chris Ball <cjb@xxxxxxxxxx>
>> Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
>> ---
>> Changes in v5:
>>       Reduced the case statements for better code readability. Removed
>>       unused macro definitions. Modified the tuning function prototype
>>       and definition to support tuning for both SD and eMMC cards.
>> Changes in v4:
>>       Rebased onto chris-mmc/mmc-next branch. This patch is
>> successfully
>>       applied on commit with id
>> de022ed3fdc14808299b2fa66dbb1ed5ab921912.
>> Changes in v3:
>>       In the previous commits of chris-mmc/mmc-next branch, the patch
>> with
>>       commit id (c0f22a2c92e357e7cb3988b0b13034d70b7461f9) defines
>> caps2 for
>>       more capabilities. This patch version deletes the member
>> ext_caps(created
>>       in my earlier patch) from struct mmc_host and reuses already
>> accepted
>>       caps2 member.
>> Changes in v2:
>>       Rebased to latest chris-mmc/mmc-next branch. Resolved indentation
>>       problems identified in review. This patch has to be applied
>> before
>>       the patch released for modifying the printk messages.
>> Changes in v1:
>>       Case statements in switch that produce same result have
>>       been combined to reduce repeated assignments.
>>       patch recreated after rebase to chris balls mmc-next branch.
>>
>>  drivers/mmc/core/bus.c    |    3 +-
>>  drivers/mmc/core/mmc.c    |   77
>> ++++++++++++++++++++++++++++++++++++++++----
>>  drivers/mmc/core/sd.c     |    3 +-
>>  drivers/mmc/core/sdio.c   |    4 ++-
>>  drivers/mmc/host/sdhci.c  |   38 +++++++++++++++++-----
>>  include/linux/mmc/card.h  |    3 ++
>>  include/linux/mmc/host.h  |   11 ++++++-
>>  include/linux/mmc/mmc.h   |   66
>> ++++++++++++++++++++++++++++++++++++++-
>>  include/linux/mmc/sdhci.h |    1 +
>>  9 files changed, 185 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
>> index 5639fdf..83c9f8d 100644
>> --- a/drivers/mmc/core/bus.c
>> +++ b/drivers/mmc/core/bus.c
>> @@ -301,10 +301,11 @@ int mmc_add_card(struct mmc_card *card)
>>                       mmc_card_ddr_mode(card) ? "DDR " : "",
>>                       type);
>>       } else {
>> -             printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
>> +             pr_info("%s: new %s%s%s%s card at address %04x\n",
>>                       mmc_hostname(card->host),
>>                       mmc_card_uhs(card) ? "ultra high speed " :
>>                       (mmc_card_highspeed(card) ? "high speed " : ""),
>> +                     (mmc_card_hs200(card) ? "HS200 " : ""),
>>                       mmc_card_ddr_mode(card) ? "DDR " : "",
>>                       type, card->rca);
>>       }
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index a1223bd..f4124d6 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -285,6 +285,27 @@ static int mmc_read_ext_csd(struct mmc_card *card,
>> u8 *ext_csd)
>>       }
>>       card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
>>       switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL:
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V:
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V:
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52:
>> +             card->ext_csd.hs_max_dtr = 200000000;
>> +             card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
>> +             break;
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52:
>> +             card->ext_csd.hs_max_dtr = 200000000;
>> +             card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
>> +             break;
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52:
>> +             card->ext_csd.hs_max_dtr = 200000000;
>> +             card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
>> +             break;
>>       case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
>>            EXT_CSD_CARD_TYPE_26:
>>               card->ext_csd.hs_max_dtr = 52000000;
>> @@ -699,6 +720,7 @@ static int mmc_init_card(struct mmc_host *host, u32
>> ocr,
>>  {
>>       struct mmc_card *card;
>>       int err, ddr = 0;
>> +     int hs_sdr = 0;
>>       u32 cid[4];
>>       unsigned int max_dtr;
>>       u32 rocr;
>> @@ -894,11 +916,16 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>       /*
>>        * Activate high speed (if supported)
>>        */
>> -     if ((card->ext_csd.hs_max_dtr != 0) &&
>> -             (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
>> -             err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> -                              EXT_CSD_HS_TIMING, 1,
>> -                              card->ext_csd.generic_cmd6_time);
>> +     if (card->ext_csd.hs_max_dtr != 0) {
>> +             err = 0;
>> +             if ((card->ext_csd.hs_max_dtr > 52000000) &&
>> +                 (host->caps2 & MMC_CAP2_HS200))
>> +                     err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> +                                      EXT_CSD_HS_TIMING, 2, 0);
>> +             else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
>> +                     err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> +                                      EXT_CSD_HS_TIMING, 1, 0);
>> +
>>               if (err && err != -EBADMSG)
>>                       goto free_card;
>>
>> @@ -907,7 +934,11 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>                              mmc_hostname(card->host));
>>                       err = 0;
>>               } else {
>> -                     mmc_card_set_highspeed(card);
>> +                     if ((card->ext_csd.hs_max_dtr > 52000000) &&
>> +                         (host->caps2 & MMC_CAP2_HS200))
>> +                             mmc_card_set_hs200(card);
>> +                     else
>> +                             mmc_card_set_highspeed(card);
>>                       mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
>
> MMC_TIMING_MMC_HS200 is defined but still not used.
>
> So I guess it should be like this ::
>  +                      if ((card->ext_csd.hs_max_dtr > 52000000) &&
>  +                          (host->caps2 & MMC_CAP2_HS200)) {
>  +                              mmc_card_set_hs200(card);
>  +                      mmc_set_timing(card->host, MMC_TIMING_MMC_HS200)
>  +                      } else {
>  +                              mmc_card_set_highspeed(card);
>  +                              mmc_set_timing(card->host,
> MMC_TIMING_MMC_HS)
>  +                      }
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>>               }
>>       }
>> @@ -933,7 +964,7 @@ static int mmc_init_card(struct mmc_host *host, u32
>> ocr,
>>        */
>>       max_dtr = (unsigned int)-1;
>>
>> -     if (mmc_card_highspeed(card)) {
>> +     if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
>>               if (max_dtr > card->ext_csd.hs_max_dtr)
>>                       max_dtr = card->ext_csd.hs_max_dtr;
>>       } else if (max_dtr > card->csd.max_dtr) {
>> @@ -959,6 +990,18 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>       }
>>
>>       /*
>> +      * Indicate HS200 SDR mode (if supported).
>> +      */
>> +     if (mmc_card_hs200(card)) {
>> +             if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V)
>> +                     && (host->caps2 & MMC_CAP2_HS200_1_8V_SDR))
>> +                             hs_sdr = MMC_1_8V_SDR_MODE;
>> +             else if ((card->ext_csd.card_type &
>> EXT_CSD_CARD_TYPE_SDR_1_2V)
>> +                     && (host->caps2 & MMC_CAP2_HS200_1_2V_SDR))
>> +                             hs_sdr = MMC_1_2V_SDR_MODE;
>> +     }
>> +
>> +     /*
>>        * Activate wide bus and DDR (if supported).
>>        */
>>       if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
>> @@ -998,6 +1041,17 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>                       if (!err) {
>>                               mmc_set_bus_width(card->host, bus_width);
>>
>> +                             if ((host->caps2 & MMC_CAP2_HS200) &&
>> +                                 card->host->ops->execute_tuning)
>> +                                     err = card->host->ops-> \
>> +                                           execute_tuning(card->host,
>> +
> MMC_SEND_TUNING_BLOCK_HS200);
>
>
> execute_tuning should be done right after the timing is changed to HS200 and
> clock rate is changed to 200Mhz. This is not the correct sequence to call
> the execute_tuning().
> As told earlier, It is mentioned in the spec that tuning should be executed after change of buswidth (mandatory). Also it mentions that "The host may invoke the HS200 tuning sequence, by sending CMD21 to the device". It means that
 after setting the HS200 mode, Changing to freq > 52Mhz and changing
the bus width tuning can be executed anytime to identify the sampling
point to read.(By anytime i mean before actual block read Operation).
Can you please point me to the place in the spec where it specifies
tuning should be done immediately after freq change (may be i missed
to read it).
>> +
>> +                             if (err) {
>> +                                     pr_warning("tuning execution
> failed\n");
>> +                                     continue;
>> +                             }
>> +
>>                               /*
>>                                * If controller can't handle bus width
> test,
>>                                * compare ext_csd previously read in 1 bit
>> mode
>> @@ -1056,6 +1110,15 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>                       mmc_card_set_ddr_mode(card);
>>                       mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50);
>>                       mmc_set_bus_width(card->host, bus_width);
>> +             } else if (hs_sdr) {
>> +                     if (hs_sdr == EXT_CSD_CARD_TYPE_SDR_1_2V) {
>> +                             err = mmc_set_signal_voltage(host,
>> +                                     MMC_SIGNAL_VOLTAGE_120, 0);
>> +                             if (err)
>> +                                     goto err;
>> +                     }
>> +                     mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
>> +                     mmc_set_bus_width(card->host, bus_width);
>>               }
>>       }
>>
>> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
>> index 1d5a3bd..c1d3ee3 100644
>> --- a/drivers/mmc/core/sd.c
>> +++ b/drivers/mmc/core/sd.c
>> @@ -660,7 +660,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card
>> *card)
>>
>>       /* SPI mode doesn't define CMD19 */
>>       if (!mmc_host_is_spi(card->host) && card->host->ops-
>> >execute_tuning)
>> -             err = card->host->ops->execute_tuning(card->host);
>> +             err = card->host->ops->execute_tuning(card->host,       \
>> +
> MMC_SEND_TUNING_BLOCK);
>>
>>  out:
>>       kfree(status);
>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
>> index 8c04f7f..8ef8817 100644
>> --- a/drivers/mmc/core/sdio.c
>> +++ b/drivers/mmc/core/sdio.c
>> @@ -14,6 +14,7 @@
>>
>>  #include <linux/mmc/host.h>
>>  #include <linux/mmc/card.h>
>> +#include <linux/mmc/mmc.h>
>>  #include <linux/mmc/sdio.h>
>>  #include <linux/mmc/sdio_func.h>
>>  #include <linux/mmc/sdio_ids.h>
>> @@ -556,7 +557,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card
>> *card)
>>
>>       /* Initialize and start re-tuning timer */
>>       if (!mmc_host_is_spi(card->host) && card->host->ops-
>> >execute_tuning)
>> -             err = card->host->ops->execute_tuning(card->host);
>> +             err = card->host->ops->execute_tuning(card->host,
>> +
> MMC_SEND_TUNING_BLOCK);
>>
>>  out:
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index a7c2311..13d74bb 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -49,7 +49,7 @@ static void sdhci_finish_data(struct sdhci_host *);
>>
>>  static void sdhci_send_command(struct sdhci_host *, struct mmc_command
>> *);
>>  static void sdhci_finish_command(struct sdhci_host *);
>> -static int sdhci_execute_tuning(struct mmc_host *mmc);
>> +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
>>  static void sdhci_tuning_timer(unsigned long data);
>>
>>  #ifdef CONFIG_PM_RUNTIME
>> @@ -1016,7 +1016,8 @@ static void sdhci_send_command(struct sdhci_host
>> *host, struct mmc_command *cmd)
>>               flags |= SDHCI_CMD_INDEX;
>>
>>       /* CMD19 is special in that the Data Present Select should be set
>> */
>> -     if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK))
>> +     if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK) ||
>> +         (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))
>>               flags |= SDHCI_CMD_DATA;
>>
>>       sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags),
>> SDHCI_COMMAND);
>> @@ -1287,7 +1288,7 @@ static void sdhci_request(struct mmc_host *mmc,
>> struct mmc_request *mrq)
>>               if ((host->flags & SDHCI_NEEDS_RETUNING) &&
>>                   !(present_state & (SDHCI_DOING_WRITE |
>> SDHCI_DOING_READ))) {
>>                       spin_unlock_irqrestore(&host->lock, flags);
>> -                     sdhci_execute_tuning(mmc);
>> +                     sdhci_execute_tuning(mmc, mrq->cmd->opcode);
>>                       spin_lock_irqsave(&host->lock, flags);
>>
>>                       /* Restore original mmc_request structure */
>> @@ -1673,7 +1674,7 @@ static int
>> sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
>>       return err;
>>  }
>>
>> -static int sdhci_execute_tuning(struct mmc_host *mmc)
>> +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
>>  {
>>       struct sdhci_host *host;
>>       u16 ctrl;
>> @@ -1694,10 +1695,13 @@ static int sdhci_execute_tuning(struct mmc_host
>> *mmc)
>>        * Host Controller needs tuning only in case of SDR104 mode
>>        * and for SDR50 mode when Use Tuning for SDR50 is set in
>>        * Capabilities register.
>> +      * If the Host Controller supports the HS200 mode then tuning
>> +      * function has to be executed.
>>        */
>>       if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
>>           (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
>> -         (host->flags & SDHCI_SDR50_NEEDS_TUNING)))
>> +         (host->flags & SDHCI_SDR50_NEEDS_TUNING)) ||
>> +         (host->flags & SDHCI_HS200_NEEDS_TUNING))
>>               ctrl |= SDHCI_CTRL_EXEC_TUNING;
>>       else {
>>               spin_unlock(&host->lock);
>> @@ -1733,7 +1737,7 @@ static int sdhci_execute_tuning(struct mmc_host
>> *mmc)
>>               if (!tuning_loop_counter && !timeout)
>>                       break;
>>
>> -             cmd.opcode = MMC_SEND_TUNING_BLOCK;
>> +             cmd.opcode = opcode;
>>               cmd.arg = 0;
>>               cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
>>               cmd.retries = 0;
>> @@ -1748,7 +1752,17 @@ static int sdhci_execute_tuning(struct mmc_host
>> *mmc)
>>                * block to the Host Controller. So we set the block size
>>                * to 64 here.
>>                */
>> -             sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
>> SDHCI_BLOCK_SIZE);
>> +             if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) {
>> +                     if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
>> +                             sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
>> +                                          SDHCI_BLOCK_SIZE);
>> +                     else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
>> +                             sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
>> +                                          SDHCI_BLOCK_SIZE);
>> +             } else {
>> +                     sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
>> +                                  SDHCI_BLOCK_SIZE);
>> +             }
>>
>>               /*
>>                * The tuning block is sent by the card to the host
>> controller.
>> @@ -2131,12 +2145,14 @@ static void sdhci_show_adma_error(struct
>> sdhci_host *host) { }
>>
>>  static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>>  {
>> +     u32 command;
>>       BUG_ON(intmask == 0);
>>
>>       /* CMD19 generates _only_ Buffer Read Ready interrupt */
>>       if (intmask & SDHCI_INT_DATA_AVAIL) {
>> -             if (SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) ==
>> -                 MMC_SEND_TUNING_BLOCK) {
>> +             command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
>> +             if ((command == MMC_SEND_TUNING_BLOCK) ||
>> +                 (command == MMC_SEND_TUNING_BLOCK_HS200)) {
>>                       host->tuning_done = 1;
>>                       wake_up(&host->buf_ready_int);
>>                       return;
>> @@ -2741,6 +2757,10 @@ int sdhci_add_host(struct sdhci_host *host)
>>       if (caps[1] & SDHCI_USE_SDR50_TUNING)
>>               host->flags |= SDHCI_SDR50_NEEDS_TUNING;
>>
>> +     /* Does the host needs tuning for HS200? */
>> +     if (mmc->caps2 & MMC_CAP2_HS200)
>> +             host->flags |= SDHCI_HS200_NEEDS_TUNING;
>> +
>>       /* Driver Type(s) (A, C, D) supported by the host */
>>       if (caps[1] & SDHCI_DRIVER_TYPE_A)
>>               mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>> index 534974c..e76f649 100644
>> --- a/include/linux/mmc/card.h
>> +++ b/include/linux/mmc/card.h
>> @@ -209,6 +209,7 @@ struct mmc_card {
>>  #define MMC_STATE_HIGHSPEED_DDR (1<<4)               /* card is in high
>> speed mode */
>>  #define MMC_STATE_ULTRAHIGHSPEED (1<<5)              /* card is in ultra
>> high speed mode */
>>  #define MMC_CARD_SDXC                (1<<6)          /* card is SDXC */
>> +#define MMC_STATE_HIGHSPEED_200      (1<<7)  /* card is in HS200
>> mode */
>>       unsigned int            quirks;         /* card quirks */
>>  #define MMC_QUIRK_LENIENT_FN0        (1<<0)          /* allow SDIO FN0
>> writes outside of the VS CCCR range */
>>  #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func-
>> >cur_blksize */
>> @@ -365,6 +366,7 @@ static inline void __maybe_unused
>> remove_quirk(struct mmc_card *card, int data)
>>  #define mmc_card_present(c)  ((c)->state & MMC_STATE_PRESENT)
>>  #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
>>  #define mmc_card_highspeed(c)        ((c)->state & MMC_STATE_HIGHSPEED)
>> +#define mmc_card_hs200(c)    ((c)->state & MMC_STATE_HIGHSPEED_200)
>>  #define mmc_card_blockaddr(c)        ((c)->state & MMC_STATE_BLOCKADDR)
>>  #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
>>  #define mmc_card_uhs(c)              ((c)->state &
>> MMC_STATE_ULTRAHIGHSPEED)
>> @@ -374,6 +376,7 @@ static inline void __maybe_unused
>> remove_quirk(struct mmc_card *card, int data)
>>  #define mmc_card_set_present(c)      ((c)->state |= MMC_STATE_PRESENT)
>>  #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
>>  #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
>> +#define mmc_card_set_hs200(c)        ((c)->state |=
>> MMC_STATE_HIGHSPEED_200)
>>  #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
>>  #define mmc_card_set_ddr_mode(c) ((c)->state |=
>> MMC_STATE_HIGHSPEED_DDR)
>>  #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>> index 706f722..5eac57a 100644
>> --- a/include/linux/mmc/host.h
>> +++ b/include/linux/mmc/host.h
>> @@ -50,6 +50,7 @@ struct mmc_ios {
>>
>>  #define MMC_TIMING_LEGACY    0
>>  #define MMC_TIMING_MMC_HS    1
>> +#define MMC_TIMING_MMC_HS200 2
>>  #define MMC_TIMING_SD_HS     2
>>  #define MMC_TIMING_UHS_SDR12 MMC_TIMING_LEGACY
>>  #define MMC_TIMING_UHS_SDR25 MMC_TIMING_SD_HS
>> @@ -60,6 +61,8 @@ struct mmc_ios {
>>  #define MMC_SDR_MODE         0
>>  #define MMC_1_2V_DDR_MODE    1
>>  #define MMC_1_8V_DDR_MODE    2
>> +#define MMC_1_2V_SDR_MODE    3
>> +#define MMC_1_8V_SDR_MODE    4
>>
>>       unsigned char   signal_voltage;         /* signalling voltage
>> (1.8V or 3.3V) */
>>
>> @@ -148,7 +151,9 @@ struct mmc_host_ops {
>>       void    (*init_card)(struct mmc_host *host, struct mmc_card *card);
>>
>>       int     (*start_signal_voltage_switch)(struct mmc_host *host,
>> struct mmc_ios *ios);
>> -     int     (*execute_tuning)(struct mmc_host *host);
>> +
>> +     /* The tuning command opcode value is different for SD and eMMC
>> cards */
>> +     int     (*execute_tuning)(struct mmc_host *host, u32 opcode);
>>       void    (*enable_preset_value)(struct mmc_host *host, bool enable);
>>       int     (*select_drive_strength)(unsigned int max_dtr, int
>> host_drv, int card_drv);
>>       void    (*hw_reset)(struct mmc_host *host);
>> @@ -242,6 +247,10 @@ struct mmc_host {
>>  #define MMC_CAP2_CACHE_CTRL  (1 << 1)        /* Allow cache control */
>>  #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)    /* Notify poweroff
>> supported */
>>  #define MMC_CAP2_NO_MULTI_READ       (1 << 3)        /* Multiblock reads
>> don't work */
>> +#define MMC_CAP2_HS200_1_8V_SDR      (1 << 4)        /* can support */
>> +#define MMC_CAP2_HS200_1_2V_SDR      (1 << 5)        /* can support */
>> +#define MMC_CAP2_HS200               (MMC_CAP2_HS200_1_8V_SDR | \
>> +                              MMC_CAP2_HS200_1_2V_SDR)
>>
>>       mmc_pm_flag_t           pm_caps;        /* supported pm features */
>>       unsigned int        power_notify_type;
>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>> index 0e71356..7996272 100644
>> --- a/include/linux/mmc/mmc.h
>> +++ b/include/linux/mmc/mmc.h
>> @@ -51,6 +51,7 @@
>>  #define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1
>> */
>>  #define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1
>> */
>>  #define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1
>> */
>> +#define MMC_SEND_TUNING_BLOCK_HS200  21      /* adtc R1  */
>>
>>    /* class 3 */
>>  #define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1
>> */
>> @@ -333,13 +334,76 @@ struct _mmc_csd {
>>
>>  #define EXT_CSD_CARD_TYPE_26 (1<<0)  /* Card can run at 26MHz */
>>  #define EXT_CSD_CARD_TYPE_52 (1<<1)  /* Card can run at 52MHz */
>> -#define EXT_CSD_CARD_TYPE_MASK       0xF     /* Mask out reserved bits */
>> +#define EXT_CSD_CARD_TYPE_MASK       0x3F    /* Mask out reserved bits */
>>  #define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz
>> */
>>                                            /* DDR mode @1.8V or 3V I/O */
>>  #define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz
>> */
>>                                            /* DDR mode @1.2V I/O */
>>  #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
>>                                       | EXT_CSD_CARD_TYPE_DDR_1_2V)
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V   (1<<4)  /* Card can run at
>> 200MHz */
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V   (1<<5)  /* Card can run at
>> 200MHz */
>> +                                             /* SDR mode @1.2V I/O */
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_200    (EXT_CSD_CARD_TYPE_SDR_1_8V     \
>> +                                     | EXT_CSD_CARD_TYPE_SDR_1_2V)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL    (EXT_CSD_CARD_TYPE_SDR_200      \
>> +                                     | EXT_CSD_CARD_TYPE_52          \
>> +                                     | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define      EXT_CSD_CARD_TYPE_SDR_1_2V_ALL
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V     \
>> +                                     | EXT_CSD_CARD_TYPE_52          \
>> +                                     | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define      EXT_CSD_CARD_TYPE_SDR_1_8V_ALL
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V     \
>> +                                     | EXT_CSD_CARD_TYPE_52          \
>> +                                     | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_8V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_8V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_2V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_2V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V
>>       (EXT_CSD_CARD_TYPE_SDR_200   \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_8V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V
>>       (EXT_CSD_CARD_TYPE_SDR_200   \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_2V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52     (EXT_CSD_CARD_TYPE_SDR_200
>> \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>>
>>  #define EXT_CSD_BUS_WIDTH_1  0       /* Card is in 1 bit mode */
>>  #define EXT_CSD_BUS_WIDTH_4  1       /* Card is in 4 bit mode */
>> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
>> index e4b6935..d9a2222 100644
>> --- a/include/linux/mmc/sdhci.h
>> +++ b/include/linux/mmc/sdhci.h
>> @@ -121,6 +121,7 @@ struct sdhci_host {
>>  #define SDHCI_AUTO_CMD23     (1<<7)  /* Auto CMD23 support */
>>  #define SDHCI_PV_ENABLED     (1<<8)  /* Preset value enabled */
>>  #define SDHCI_SDIO_IRQ_ENABLED       (1<<9)  /* SDIO irq enabled */
>> +#define SDHCI_HS200_NEEDS_TUNING (1<<10)     /* HS200 needs tuning */
>>
>>       unsigned int version;   /* SDHCI spec. version */
>>
>> --
>> 1.7.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux