Hello. This patch series adds USB OHCI device and initial driver for Samsung S5P SoCs and is based from Linux 3.2-rc1. I have tested on SMDKV310 board using EXYNOS4. Thanks. Jingoo Han (4): ARM: SAMSUNG: Add USB OHCI device ARM: EXYNOS: Add USB OHCI support to SMDKV310 board USB: Add S5P OHCI diver arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-exynos/mach-smdkv310.c | 13 +++++++++++++ arch/arm/mach-exynos/include/mach/map.h | 2 + arch/arm/plat-s5p/Kconfig | 5 ++++ arch/arm/plat-samsung/devs.c | 34 +++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/devs.h | 1 + arch/arm/plat-samsung/include/plat/ohci.h | 21 +++++++++++++++++ drivers/usb/Kconfig | 1 + drivers/usb/host/Kconfig | 6 + drivers/usb/host/ohci-hcd.c | 5 + drivers/usb/host/ohci-s5p.c | 273 +++++++++++++++++++++++++++++++++++++++++++ 11 files changed, 362 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-samsung/include/plat/ohci.h create mode 100644 drivers/usb/host/ohci-s5p.c ÿ淸º{.nÇ+돴윯돪†+%듚ÿ깁負¥Šwÿº{.nÇ+돴¥Š{깸튐꿴筬Êþ)í끾èw*jgП¨¶‰šŽ듶¢jÿ¾?G«앶ÿ◀◁¦j:+v돣ŠwèjØm¶Ÿÿ?®w?듺þf"·hš뤴얎ÿ녪¥