Here is my boot log including some u-boot stuff. The trace in my boot
log is concerning a
still broken GPIO bank M access that appears broken.
Thanks,
Paul Schilling
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 12:23:34:88:99:00
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 10.5.16.68
TFTP from server 10.5.16.63; our IP address is 10.5.16.68
Filename 'schilpa/uImage-dev.bin'.
Load address: 0xc0008000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##################################
done
Bytes transferred = 2501760 (0x262c80)
get_format
-------- 1 --------
## Booting kernel from Legacy Image at c0008000 ...
Image Name: Linux-3.2.0-rc1+
Created: 2011-11-09 23:23:05 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2501696 Bytes = 2.4 MB
Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
get_format
-------- 1 --------
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 3.2.0-rc1+ (####) (gcc version 4.3.3 (GCC) ) #53 PREEMPT
Wed Nov 9 17:23:00 CST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: CONDOR2416
Memory policy: ECC disabled, Data cache writeback
CPU S3C2416/S3C2450 (id 0x32450003)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
CPU: MPLL on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 MHz
CPU: EPLL on 96.000 MHz, usb-bus 48.000 MHz
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat c050955c, node_mem_map c053e000
Normal zone: 384 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 32384 pages, LIFO batch:7
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32384
Kernel command line: console=ttySAC0,115200 loglevel=8
s3cfb=dev:0,depth:16,xres:480,yres:272,vslen:60,hslen:17,left:41,right:68,upper:26,lower:6,pixclock:0
root=/dev/mtdblock4 rw rootfstype=jffs2 ethaddr=12:23:34:88:99:00
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB 64MB = 128MB total
Memory: 124544k/124544k available, 6528k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xcc800000 - 0xf6000000 ( 664 MB)
lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc04992b8 (4677 kB)
.init : 0xc049a000 - 0xc04dd000 ( 268 kB)
.data : 0xc04de000 - 0xc0509c00 ( 175 kB)
.bss : 0xc0509c24 - 0xc053d764 ( 207 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:99
irq: clearing subpending status 00000003
irq: clearing subpending status 00000002
timer tcon=00500000, tcnt 2b66, tcfg 00000200,00000000, usec 0000170a
Console: colour dummy device 80x30
Calibrating delay loop... 197.88 BogoMIPS (lpj=98944)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
------------[ cut here ]------------
WARNING: at arch/arm/mach-s3c2416/mach-condor2416.c:875
condor2416_machine_init+0xbc/0x700()
Modules linked in:
[<c000de08>] (unwind_backtrace+0x0/0xec) from [<c001f6e0>]
(warn_slowpath_common+0x48/0x60)
[<c001f6e0>] (warn_slowpath_common+0x48/0x60) from [<c001f714>]
(warn_slowpath_null+0x1c/0x24)
[<c001f714>] (warn_slowpath_null+0x1c/0x24) from [<c049ea9c>]
(condor2416_machine_init+0xbc/0x700)
[<c049ea9c>] (condor2416_machine_init+0xbc/0x700) from [<c049bd64>]
(customize_machine+0x20/0x30)
[<c049bd64>] (customize_machine+0x20/0x30) from [<c00087c0>]
(do_one_initcall+0xa4/0x16c)
[<c00087c0>] (do_one_initcall+0xa4/0x16c) from [<c049a21c>]
(kernel_init+0x7c/0x11c)
[<c049a21c>] (kernel_init+0x7c/0x11c) from [<c0009d94>]
(kernel_thread_exit+0x0/0x8)
---[ end trace 1b75b31a2719ed1c ]---
s3c_fb_setup: option dev:0
s3c_fb_setup: option depth:16
s3c_fb_setup: option xres:480
s3c_fb_setup: option yres:272
s3c_fb_setup: option vslen:60
s3c_fb_setup: option hslen:17
s3c_fb_setup: option left:41
s3c_fb_setup: option right:68
s3c_fb_setup: option upper:26
s3c_fb_setup: option lower:6
s3c_fb_setup: option pixclock:0
Condor2416: Start Set DM9K
S3C Power Management, Copyright 2004 Simtec Electronics
S3C2416: Initializing architecture
S3C2416: IRQ Support
S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
DMA channel 0 at cc804000, irq 88
DMA channel 1 at cc804100, irq 89
DMA channel 2 at cc804200, irq 90
DMA channel 3 at cc804300, irq 91
DMA channel 4 at cc804400, irq 92
DMA channel 5 at cc804500, irq 93
s3c24xx-pwm s3c24xx-pwm.0: tin at 33333333, tdiv at 33333333, tin=divclk, base 0
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2410-i2c: slave address 0x10
s3c-i2c s3c2410-i2c: bus frequency set to 65 KHz
s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.24.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
s3c-adc s3c24xx-adc: attached adc driver
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 243
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
Console: switching to colour frame buffer device 60x34
s3c-fb s3c-fb: window 0: fb
s3c2440-uart s3c2440-uart.0: port TX GPIO (-1)
s3c2440-uart s3c2440-uart.0: port TX GPIO (-1)
s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
console [ttySAC0] enabled
s3c2440-uart s3c2440-uart.1: port TX GPIO (13)
s3c2440-uart s3c2440-uart.1: port TX GPIO (12)
s3c2440-uart s3c2440-uart.1: Enable Hi Res Timer
s3c2440-uart s3c2440-uart.1: Port (1) 485 Enabled
s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart s3c2440-uart.1: Initialize TX(1) GPIO
s3c2440-uart s3c2440-uart.1: Initialize RX(1) GPIO
s3c2440-uart s3c2440-uart.2: port TX GPIO (42)
s3c2440-uart s3c2440-uart.2: port TX GPIO (41)
s3c2440-uart s3c2440-uart.2: Enable Hi Res Timer
s3c2440-uart s3c2440-uart.2: Port (2) 485 Enabled
s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
s3c2440-uart s3c2440-uart.2: Initialize TX(2) GPIO
s3c2440-uart s3c2440-uart.2: Initialize RX(2) GPIO
s3c2440-uart s3c2440-uart.3: port TX GPIO (-1)
s3c2440-uart s3c2440-uart.3: port TX GPIO (-1)
s3c2440-uart.3: ttySAC3 at MMIO 0x5000c000 (irq = 94) is a S3C2440
brd: module loaded
at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
mtdoops: mtd device (mtddev=name/number) must be supplied
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c24xx-nand s3c2412-nand: Tacls=3, 22ns Twrph0=8 60ns, Twrph1=3 22ns
s3c24xx-nand s3c2412-nand: System booted from NAND
s3c24xx-nand s3c2412-nand: NAND soft ECC
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB
3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 0 at 0x000000000000
Bad eraseblock 1 at 0x000000020000
Bad eraseblock 864 at 0x000006c00000
Bad eraseblock 1304 at 0x00000a300000
Bad eraseblock 1336 at 0x00000a700000
Creating 5 MTD partitions on "NAND":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000060000 : "u-boot-env"
0x000000060000-0x000000560000 : "kernel"
0x000000560000-0x000000660000 : "log"
0x000000660000-0x000010000000 : "root"
dm9000 Ethernet Driver, V1.31
eth0: dm9000a at cc85e300,cc860308 IRQ 53 MAC: 12:23:34:88:99:00 (platform data)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
mousedev: PS/2 mouse device common for all mice
input: matrix-keypad as /devices/platform/matrix-keypad/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc-if (96000000 Hz)
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
sdhci-pltfm: SDHCI platform and OF driver helper
Registered led device: led1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
samsung_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: uda134x-hifi <-> samsung-i2s.0 mapping ok
ALSA device list:
#0: SAMSUNG_UDA134X
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
s3c-rtc s3c2410-rtc: setting system clock to 2011-11-04 19:30:44 UTC
(1320435044)
usb 1-1: new full-speed USB device number 2 using s3c2410-ohci
VFS: Mounted root (jffs2 filesystem) on device 31:4.
Freeing init memory: 268K
On Thu, Nov 10, 2011 at 1:59 AM, Heiko Stübner <heiko@xxxxxxxxx> wrote:
> Hi Paul,
>
> Am Donnerstag, 10. November 2011, 01:14:59 schrieb Thomas Abraham:
>> On 10 November 2011 05:00, Paul Schilling <paul.s.schilling@xxxxxxxxx>
> wrote:
>> > Boot past init slow - stalled when using jffs2 also.
>> >
>> > On Wed, Nov 9, 2011 at 4:12 PM, Paul Schilling
>> >
>> > <paul.s.schilling@xxxxxxxxx> wrote:
>> >> Latest kernel 3.2.0-rc1 appears to break the following processors
>> >> s3c2440 and s3c2416
>> >>
>> >> both appear to stall when init is executed on NFS. Also I lost HSMMC
>> >> on the s3c2416.
>>
>> Could you post a boot log of the kernel on the s3c2440 and s3c2416 boards?
>
> Also, is your out-of-tree kernel code available somewhere? [1]
>
> As my S3C2416 based platform didn't show any problems and has working hsmmc
> with 3.2-rc1 it would be cool to be able to compare both and see if we differ
> somehow.
>
>
> Heiko
>
>
> [1] Mine's at https://gitorious.org/oyo-hack/kernel/commits/topic/board/sg060
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
