Hi Jamie, On 9 November 2011 16:55, Thomas Abraham <thomas.abraham@xxxxxxxxxx> wrote: > Hi Jamie, > > On 4 November 2011 06:40, Jamie Iles <jamie@xxxxxxxxxxxxx> wrote: >> Now that there is a generic IRQ handler for multiple VIC devices use it >> for s3c64xx to help building multi platform kernels. >> >> Cc: Ben Dooks <ben-linux@xxxxxxxxx> >> Signed-off-by: Jamie Iles <jamie@xxxxxxxxxxxxx> >> --- >> arch/arm/Kconfig | 1 + >> arch/arm/mach-s3c64xx/include/mach/entry-macro.S | 7 ++++--- >> arch/arm/mach-s3c64xx/mach-anw6410.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-hmt.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-mini6410.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-ncp.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-real6410.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-smartq5.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-smartq7.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-smdk6400.c | 2 ++ >> arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 ++ >> 12 files changed, 25 insertions(+), 3 deletions(-) >> > > I have tested this patch series on smdk6410 board (s3c64xx) using the > following repositorty and branch > > https://github.com/jamieiles/linux-2.6-ji.git branch: vic-dt > > There is a crash while booting. Am I using the right tree and branch? > The following is the boot log. Is there any other config option to be > enabled? > > By hard resetting to commit id > 'f7bf800e2c0c2947e9b5839f7d2702a36ddfb71a' (ARM: omap2plus: convert to > CONFIG_MULTI_IRQ_HANDLER), the board boots up fine. There is similar issue on smdkv210 (s5pv210) board as well. Thanks, Thomas. > > Thanks, > Thomas. > > > U-Boot 1.3.4-00009-g9da84bd (Jun 8 2010 - 09:46:01) for SMDK6410 > > > CPU: S3C6410@532MHz > Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART > (SYNC Mode) > Board: SMDK6410 > DRAM: 128 MB > Flash: 0 kB > SD/MMC: SD/MMC channel0 is selected for booting device. > 1886MB > NAND: 0 MB > do not support this address : 57e7c008 > In: serial > Out: serial > Err: serial > Net: smc911x > Hit any key to stop autoboot: 0 > SMDK6410 # > SMDK6410 # > SMDK6410 # > SMDK6410 # setenv bootargs; setenv serverip 192.168.0.1; tftp 51000000 > small_root_v3.6.cramfs; tftp 50008000 zImage; bootm > smc911x: initializing > smc911x: detected LAN9115 controller > smc911x: phy initialized > smc911x: MAC 00:40:5c:26:0a:5b > Using smc911x device > TFTP from server 192.168.0.1; our IP address is 192.168.0.20 > Filename 'small_root_v3.6.cramfs'. > Load address: 0x51000000 > Loading: T ################################################################# > ################################################################# > ################################################################ > done > Bytes transferred = 2842624 (0x2b6000) > smc911x: initializing > smc911x: detected LAN9115 controller > smc911x: phy initialized > smc911x: MAC 00:40:5c:26:0a:5b > Using smc911x device > TFTP from server 192.168.0.1; our IP address is 192.168.0.20 > Filename 'zImage'. > Load address: 0x50008000 > Loading: T ################################################################# > ######################################## > done > Bytes transferred = 1534176 (0x1768e0) > Boot with zImage > do not support this address : 50008000 > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > <5>Linux version 3.2.0-rc1-00031-gcbd9857-dirty > (thomas@localhost.localdomain) (gcc version 4.4.1 (Sourcery G++ Lite > 2009q3-67) ) #7 Wed Nov 9 16:35:12 IST 2011 > CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f > CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache > Machine: SMDK6410 > <4>Ignoring unrecognised tag 0x41001099 > Memory policy: ECC disabled, Data cache writeback > CPU S3C6410 (id 0x36410100) > <7>s3c6410_init_clocks: initialising clocks > <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics > <3>camera: no parent clock specified > <7>s3c6400_setup_clocks: registering clocks > <7>s3c6400_setup_clocks: clkdiv0 = 01043310 > <7>s3c6400_setup_clocks: xtal is 12000000 > <6>S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000 > <6>S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000 > <6>mout_apll: source is fout_apll (1), rate is 532000000 > <6>mout_epll: source is epll (1), rate is 24000000 > <6>mout_mpll: source is mpll (1), rate is 532000000 > <7>s3c64xx_clk_doutmpll_get_rate: parent is 532000000 > <6>mmc_bus: source is dout_mpll (1), rate is 24181818 > <6>mmc_bus: source is mout_epll (0), rate is 24000000 > <6>mmc_bus: source is mout_epll (0), rate is 24000000 > <6>usb-bus-host: source is clk_48m (0), rate is 48000000 > <7>s3c64xx_clk_doutmpll_get_rate: parent is 532000000 > <6>uclk1: source is dout_mpll (1), rate is 66500000 > <6>spi-bus: source is mout_epll (0), rate is 24000000 > <6>spi-bus: source is mout_epll (0), rate is 24000000 > <6>audio-bus: source is mout_epll (0), rate is 24000000 > <6>audio-bus: source is mout_epll (0), rate is 24000000 > <6>audio-bus: source is mout_epll (0), rate is 24000000 > <6>irda-bus: source is mout_epll (0), rate is 24000000 > <3>camera: no parent clock specified > <7>On node 0 totalpages: 8192 > <7>free_area_init_node: node 0, pgdat c02ce184, node_mem_map c0300000 > <7> Normal zone: 64 pages used for memmap > <7> Normal zone: 0 pages reserved > <7> Normal zone: 8128 pages, LIFO batch:0 > <6>CPU: found DTCM0 8k @ 0c002000, enabled > <6>CPU: moved DTCM0 8k to fffe8000, enabled > <6>CPU: found DTCM1 8k @ 0c004000, enabled > <6>CPU: moved DTCM1 8k to fffea000, enabled > <6>CPU: found ITCM0 8k @ 00000000, not enabled > <6>CPU: moved ITCM0 8k to fffe0000, enabled > <6>CPU: found ITCM1 8k @ 00000000, not enabled > <6>CPU: moved ITCM1 8k to fffe2000, enabled > <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > <7>pcpu-alloc: [0] 0 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 > <5>Kernel command line: root=/dev/ram0 rw ramdisk=8192 > initrd=0x51000000,8M console=ttySAC0,115200 init=/linuxrc mem=32M > <6>PID hash table entries: 128 (order: -3, 512 bytes) > <6>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) > <6>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) > <6>Memory: 32MB = 32MB total > <5>Memory: 21164k/21164k available, 11604k reserved, 0K highmem > <5>Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > DTCM : 0xfffe8000 - 0xfffec000 ( 16 kB) > ITCM : 0xfffe0000 - 0xfffe4000 ( 16 kB) > fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > vmalloc : 0xc2800000 - 0xf6000000 ( 824 MB) > lowmem : 0xc0000000 - 0xc2000000 ( 32 MB) > modules : 0xbf000000 - 0xc0000000 ( 16 MB) > .text : 0xc0008000 - 0xc028c9a8 (2579 kB) > .init : 0xc028d000 - 0xc02a9000 ( 112 kB) > .data : 0xc02aa000 - 0xc02ce7e0 ( 146 kB) > .bss : 0xc02cf024 - 0xc02ff68c ( 194 kB) > <6>SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > <6>NR_IRQS:246 > <7>s3c64xx_init_irq: initialising interrupts > <6>VIC @f6000000: id 0x00041192, vendor 0x41 > <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000 > <1>pgd = c0004000 > <1>[00000000] *pgd=00000000 > <0>Internal error: Oops: 5 [#1] > <d>Modules linked in: > CPU: 0 Not tainted (3.2.0-rc1-00031-gcbd9857-dirty #7) > PC is at irq_domain_add+0x10/0x158 > LR is at s3c64xx_init_irq+0x2c/0x60 > pc : [<c005aa10>] lr : [<c0293660>] psr: 800001d3 > sp : c02abfa8 ip : ffffffff fp : 00000000 > r10: 502a3620 r9 : 410fb766 r8 : 50004008 > r7 : 00000000 r6 : 8fffffff r5 : ffffff7f r4 : c02cf284 > r3 : 00000000 r2 : 00000000 r1 : c02cf260 r0 : c02cf284 > Flags: Nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel > Control: 00c5387f Table: 50004008 DAC: 00000017 > <0>Process swapper (pid: 0, stack limit = 0xc02aa268) > <0>Stack: (0xc02abfa8 to 0xc02ac000) > <0>bfa0: ffffffff ffffff7f 8fffffff c02ae77c 50004008 c0293660 > <0>bfc0: c02cf040 c02a4afc 8fffffff c028ff74 00000c00 c028d660 c028d2c0 00000000 > <0>bfe0: 00000000 c02a4afc 00c5387d c02ac084 c02a4af8 50008040 00000000 00000000 > [<c005aa10>] (irq_domain_add+0x10/0x158) from [<c0293660>] > (s3c64xx_init_irq+0x2c/0x60) > [<c0293660>] (s3c64xx_init_irq+0x2c/0x60) from [<c028ff74>] (init_IRQ+0x14/0x1c) > [<c028ff74>] (init_IRQ+0x14/0x1c) from [<c028d660>] (start_kernel+0x15c/0x2c0) > [<c028d660>] (start_kernel+0x15c/0x2c0) from [<50008040>] (0x50008040) > <0>Code: e92d41f0 e1a04000 e5903014 e5907010 (e5933000) > <4>---[ end trace 1b75b31a2719ed1c ]--- > <0>Kernel panic - not syncing: Attempted to kill the idle task! > [<c0014978>] (unwind_backtrace+0x0/0xf4) from [<c01e9780>] (panic+0x58/0x188) > [<c01e9780>] (panic+0x58/0x188) from [<c00297a0>] (do_exit+0x664/0x694) > [<c00297a0>] (do_exit+0x664/0x694) from [<c0012728>] (die+0x11c/0x1d4) > [<c0012728>] (die+0x11c/0x1d4) from [<c00161dc>] (__do_kernel_fault+0x64/0x84) > [<c00161dc>] (__do_kernel_fault+0x64/0x84) from [<c0016340>] > (do_page_fault+0x144/0x1e8) > [<c0016340>] (do_page_fault+0x144/0x1e8) from [<c00084a0>] > (do_DataAbort+0x34/0x98) > [<c00084a0>] (do_DataAbort+0x34/0x98) from [<c000e6f8>] (__dabt_svc+0x38/0x60) > Exception stack(0xc02abf60 to 0xc02abfa8) > bf60: c02cf284 c02cf260 00000000 00000000 c02cf284 ffffff7f 8fffffff 00000000 > bf80: 50004008 410fb766 502a3620 00000000 ffffffff c02abfa8 c0293660 c005aa10 > bfa0: 800001d3 ffffffff > [<c000e6f8>] (__dabt_svc+0x38/0x60) from [<c005aa10>] > (irq_domain_add+0x10/0x158) > [<c005aa10>] (irq_domain_add+0x10/0x158) from [<c0293660>] > (s3c64xx_init_irq+0x2c/0x60) > [<c0293660>] (s3c64xx_init_irq+0x2c/0x60) from [<c028ff74>] (init_IRQ+0x14/0x1c) > [<c028ff74>] (init_IRQ+0x14/0x1c) from [<c028d660>] (start_kernel+0x15c/0x2c0) > [<c028d660>] (start_kernel+0x15c/0x2c0) from [<50008040>] (0x50008040) > > > [...] > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |