Hi Girish,
On 10/18/2011 10:35 AM, Girish K S wrote:
This patch adds the support for power off notify feature, available in
eMMC 4.5 devices. If the the host has support for this feature, then the
mmc core will notify it to the device by setting the POWER_OFF_NOTIFICATION
byte in the extended csd register with a value 1(POWER_ON).
For suspend mode short timeout is used, whereas for the normal poweroff long
timeout is used.
cc: Chris Ball<cjb@xxxxxxxxxx>
Signed-off-by: Girish K S<girish.shivananjappa@xxxxxxxxxx>
Signed-off-by: Jaehoon Chung<jh80.chung@xxxxxxxxxxx>
---
Changes in V9:
Removed the macros not related with the PowerOff notify feature.
The previous patch with commit id
bd3151f6c55c553bed2c0df72792841457b75bb5 should be deleted before
applying this patch.
Changes in V8:
Updated with review comments of Chris Ball and rebased to
chris-mmc/mmc-next branch.
Changes in V7:
Rebased to chris-mmc/mmc-next branch. merged to patches to single
patch.
Changes in V6:
Fixes checkpatch errors. The patches are generated after rebasing to
chris's mmc-next branch.
Changes in V5:
This patch version fixes the problem with power off notify function,
when called for the first time and card is not yet initialised.
Changes in V4:
Updated with review comments of Jeon
Changes in V2:
Adds poweroff notification handling in suspend/normal.
drivers/mmc/core/core.c | 34 ++++++++++++++++++++++++++++++++++
drivers/mmc/core/mmc.c | 23 +++++++++++++++++++++--
drivers/mmc/host/sdhci.c | 9 +++++++++
include/linux/mmc/card.h | 6 ++++++
include/linux/mmc/host.h | 5 +++++
include/linux/mmc/mmc.h | 6 ++++++
6 files changed, 81 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 61d7730..b1eca96 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1212,11 +1212,43 @@ static void mmc_power_up(struct mmc_host *host)
void mmc_power_off(struct mmc_host *host)
{
+ struct mmc_card *card;
+ unsigned int notify_type;
+ unsigned int timeout;
+ int err;
+
mmc_host_clk_hold(host);
+ card = host->card;
host->ios.clock = 0;
host->ios.vdd = 0;
+ if (card&& mmc_card_mmc(card)&&
+ card->poweroff_notify_state == MMC_POWERED_ON) {
+
+ if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
+ notify_type = EXT_CSD_POWER_OFF_SHORT;
+ timeout = card->ext_csd.generic_cmd6_time;
+ card->poweroff_notify_state = MMC_POWEROFF_SHORT;
+ } else {
+ notify_type = EXT_CSD_POWER_OFF_LONG;
+ timeout = card->ext_csd.power_off_longtime;
+ card->poweroff_notify_state = MMC_POWEROFF_LONG;
+ }
+
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_POWER_OFF_NOTIFICATION,
+ notify_type, timeout);
During suspend, the device can already be in sleep state (CMD5) before
mmc_power_off()
is called from mmc_suspend_host(). As per eMMC specification, when the
device is in sleep state,
it can only respond to RESET commands (CMD0 with argument of either
0x00000000 or
0xF0F0F0F0 or H/W reset) and awake command (CMD5). So, how does this
switch going
to happen (CMD6) if it is in sleep state?
Thanks,
Sahitya.
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
