Adds support for HSMMC for S5P64X0 platform, performs
setup for host controller and related GPIO.
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@xxxxxxxxxxx>
---
arch/arm/mach-s5p64x0/Kconfig | 24 +++++++
arch/arm/mach-s5p64x0/Makefile | 1 +
arch/arm/mach-s5p64x0/cpu.c | 9 +++
arch/arm/mach-s5p64x0/setup-sdhci-gpio.c | 104 ++++++++++++++++++++++++++++
arch/arm/plat-samsung/include/plat/sdhci.h | 42 +++++++++++
5 files changed, 180 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 4de625a..4d6154e 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -41,6 +41,11 @@ config S5P64X0_SETUP_SPI
help
Common setup code for SPI GPIO configurations
+config S5P64X0_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
# machine support
config MACH_SMDK6440
@@ -50,12 +55,16 @@ config MACH_SMDK6440
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6440
@@ -66,13 +75,28 @@ config MACH_SMDK6450
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6450
+menu "Use 8-bit SDHCI bus width"
+
+config S5P64X0_SD_CH1_8BIT
+ bool "SDHCI Channel 1 (Slot 1)"
+ depends on MACH_SMDK6450 || MACH_SMDK6440
+ help
+ Support SDHCI Channel 1 8-bit bus.
+ If selected, Channel 2 is disabled.
+
+endmenu
+
endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f473de..084f436 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o
+obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index ecab40c..f6e24f3 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -40,6 +40,7 @@
#include <plat/s5p6450.h>
#include <plat/adc-core.h>
#include <plat/fb-core.h>
+#include <plat/sdhci.h>
/* Initial IO mappings */
@@ -112,6 +113,10 @@ void __init s5p6440_map_io(void)
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s5p64x0_default_sdhci0();
+ s5p64x0_default_sdhci1();
+ s5p6440_default_sdhci2();
+
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
init_consistent_dma_size(SZ_8M);
@@ -123,6 +128,10 @@ void __init s5p6450_map_io(void)
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s5p64x0_default_sdhci0();
+ s5p64x0_default_sdhci1();
+ s5p6450_default_sdhci2();
+
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
init_consistent_dma_size(SZ_8M);
diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
new file mode 100644
index 0000000..8410af0
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
@@ -0,0 +1,104 @@
+/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
+#include <plat/cpu.h>
+
+void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set all the necessary GPG pins to special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+
+ /* Set GPG[6] pin to special-function 2 - MMC0 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (soc_is_s5p6450()) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
+ }
+ }
+}
+
+void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
+
+ switch (width) {
+ case 8:
+ /* Set data pins GPH[6:9] special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ case 4:
+ /* set data pins GPH[2:5] special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ default:
+ break;
+ }
+
+ /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (soc_is_s5p6450()) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
+ }
+ }
+}
+
+void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
+
+ /* Set data pins GPH[6:9] pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
+}
+
+void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index ae23555..b43999c 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -118,6 +118,10 @@ extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C2416 SDHCI setup */
@@ -329,4 +333,42 @@ static inline void s3c_sdhci_setname(int id, char *name)
#endif
}
}
+
+/* S5P64X0 SDHCI setup */
+#ifdef CONFIG_S5P64X0_SETUP_SDHCI
+static inline void s5p64x0_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC */
+}
+
+static inline void s5p64x0_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+}
+
+static inline void s5p6440_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+}
+
+static inline void s5p6450_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+}
+
+#else
+static inline void s5p64x0_default_sdhci0(void) { }
+static inline void s5p64x0_default_sdhci1(void) { }
+static inline void s5p6440_default_sdhci2(void) { }
+static inline void s5p6450_default_sdhci2(void) { }
+#endif /* CONFIG_S5P64X0_SETUP_SDHCI */
+
#endif /* __PLAT_S3C_SDHCI_H */
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
