As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine file.
SPI platform specific data is initialized in the corresponding
machine file.
Signed-off-by: Padmavathi Venna <padma.v@xxxxxxxxxxx>
---
arch/arm/mach-s3c64xx/Kconfig | 3 ++-
arch/arm/mach-s3c64xx/mach-crag6410.c | 9 +++++++++
2 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 4388186..90b34ab 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -281,6 +281,7 @@ config MACH_WLF_CRAGG_6410
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SPI
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_USB_HOST
@@ -291,7 +292,7 @@ config MACH_WLF_CRAGG_6410
select S3C_DEV_I2C1
select S3C_DEV_WDT
select S3C_DEV_RTC
- select S3C64XX_DEV_SPI
+ select S3C64XX_DEV_SPI0
select S3C24XX_GPIO_EXTRA128
select I2C
help
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index d04b654..aa3fe8f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -669,6 +669,15 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
.cfg_gpio = crag6410_cfg_sdhci0,
};
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+static struct s3c64xx_spi_info crag6410_spi0_pdata __initdata = {
+ .cfg_gpio = s3c64xx_spi0_cfg_gpio,
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+};
+#endif
+
static void __init crag6410_machine_init(void)
{
/* Open drain IRQs need pullups */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
