[PATCH 6/6] mmc: sdhci-s3c: Add device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree based discovery support for Samsung's sdhci controller

Cc: Ben Dooks <ben-linux@xxxxxxxxx>
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
---
 .../devicetree/bindings/mmc/samsung-sdhci.txt      |   75 ++++++++++
 drivers/mmc/host/sdhci-s3c.c                       |  152 +++++++++++++++++++-
 2 files changed, 221 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/samsung-sdhci.txt

diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
new file mode 100644
index 0000000..a6dd6bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
@@ -0,0 +1,75 @@
+* Samsung's SDHCI Controller device tree bindings
+
+Samsung's SDHCI controller is used as a connectivity interface with external
+MMC, SD and eMMC storage mediums.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+  - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
+    controller.
+  - "samsung,exynos4210-sdhci": For controller compatible with Exynos4 sdhci
+    controller.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+  depends on the interrupt controller.
+
+
+Required Board Specific Properties:
+- gpios: Should specify the gpios used for clock, command and data lines. The
+  gpio specifier format depends on the gpio controller. Note: There is no
+  particular order in which the gpio's have to be listed.
+
+
+Optional Board Specific Properties:
+- samsung,sdhci-bus-width: Number of data lines connected to the controller.
+  Note: This excludes the clock,command and card detect lines. If this property
+  is not specified, default value is 1.
+
+- samsung,cd-gpio-invert: If 'samsung,sdhci-cd-gpio' card detect method is
+  selected, this property can be optionally specified to invert the value of
+  external card detect gpio line.
+
+- One of the following properties for card detect type.
+  - samsung,sdhci-cd-internal: Card detect line from the card slot  is
+    connected to the card detect pad of the sdhci controller. A gpio is
+    used for this connection (with possible pin function settings).
+  - samsung,sdhci-cd-gpio: A gpio line (with possible pin function settings)
+    is used a card detect line. This gpio line is not connected to card detect
+    pad of the sdhci controller.
+  - samsung,sdhci-cd-none: There is no card detect line. Polling is used to
+    detect the presence of the card. (DEFAULT, if no card detect property
+    is specified).
+  - samsung,sdhci-cd-permanent: There is no card detect line. The card is
+    permanently connected to the sdhci controller.
+
+- gpio-cd: The gpio to be used as card detect line for
+  'samsung,sdhci-cd-internal' or 'samsung,sdhci-cd-gpio' card detection method.
+  The gpio specifier format depends on the gpio controller.
+
+- One or more of the linux specific mmc host bindings.
+  See Documentation/devicetree/bindings/mmc/linux-mmc-host.txt for all the
+  linux mmc host controller specific bindings.
+
+Example:
+	sdhci@12530000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12530000 0x100>;
+		interrupts = <139>;
+		samsung,sdhci-bus-width = <4>;
+		linux,mmc_cap_4_bit_data;
+		samsung,sdhci-cd-internal;
+		gpio-cd = <&gpk2 2 2 3 3>;
+		gpios = <&gpk2 0 2 0 3>,  /* clock line */
+			<&gpk2 1 2 0 3>,  /* command line */
+			<&gpk2 3 2 3 3>,  /* data line 0 */
+			<&gpk2 4 2 3 3>,  /* data line 1 */
+			<&gpk2 5 2 3 3>,  /* data line 2 */
+			<&gpk2 6 2 3 3>;  /* data line 3 */
+	};
+
+	Note: This example shows both SoC specific and board specific properties
+	in a single device node. The properties can be actually be seperated
+	into SoC specific node and board specific node.
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index c77ec42..e77e301 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <linux/mmc/host.h>
 
@@ -29,6 +31,8 @@
 #include "sdhci.h"
 
 #define MAX_BUS_CLK	(4)
+/* Number of gpio's used is max data bus width + command and clock lines */
+#define NUM_GPIOS(x)	(x + 2)
 
 /**
  * struct sdhci_s3c - S3C SDHCI instance
@@ -48,6 +52,7 @@ struct sdhci_s3c {
 	unsigned int		cur_clk;
 	int			ext_cd_irq;
 	int			ext_cd_gpio;
+	int			*gpios;
 
 	struct clk		*clk_io;
 	struct clk		*clk_bus[MAX_BUS_CLK];
@@ -415,9 +420,112 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
 	}
 }
 
+#ifdef CONFIG_OF
+static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	struct device_node *node = dev->of_node;
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	u32 max_width;
+	int gpio, cnt, ret;
+
+	/* if the bus-width property is not specified, assume width as 1 */
+	if (of_property_read_u32(node, "samsung,sdhci-bus-width",
+				&max_width))
+		max_width = 1;
+	pdata->max_width = max_width;
+
+	ourhost->gpios = devm_kzalloc(dev, NUM_GPIOS(pdata->max_width) *
+				sizeof(int), GFP_KERNEL);
+	if (!ourhost->gpios)
+		return -ENOMEM;
+
+	mmc_of_parse_host_caps(node, (unsigned long *)&pdata->host_caps);
+
+	/* get the card detection method */
+	if (of_get_property(node, "samsung,sdhci-cd-internal", NULL))
+		pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+	else if (of_get_property(node, "samsung,sdhci-cd-gpio", NULL))
+		pdata->cd_type = S3C_SDHCI_CD_GPIO;
+	else if (of_get_property(node, "samsung,sdhci-cd-none", NULL))
+		pdata->cd_type = S3C_SDHCI_CD_NONE;
+	else if (of_get_property(node, "samsung,sdhci-cd-permanent", NULL))
+		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
+	else
+		pdata->cd_type = S3C_SDHCI_CD_NONE;
+
+	/* get the gpio used for card detection */
+	if (pdata->cd_type == S3C_SDHCI_CD_GPIO ||
+			pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		gpio = of_get_named_gpio(node, "gpio-cd", 0);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(dev, "invalid card detect gpio specified\n");
+			return -EINVAL;
+		}
+	}
+
+	if (pdata->cd_type == S3C_SDHCI_CD_GPIO) {
+		pdata->ext_cd_gpio = gpio;
+		ourhost->ext_cd_gpio = -1; /* invalid gpio number */
+		if (of_get_property(node, "samsung,cd-gpio-invert", NULL))
+			pdata->ext_cd_gpio_invert = 1;
+	} else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		ret = gpio_request(gpio, "sdhci-cd");
+		if (ret) {
+			dev_err(dev, "card detect gpio request failed\n");
+			return -EINVAL;
+		}
+		ourhost->ext_cd_gpio = gpio;
+	}
+
+	/* get the gpios for command, clock and data lines */
+	for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
+		gpio = of_get_gpio(node, cnt);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(dev, "invalid gpio[%d]\n", cnt);
+			goto err_free_dt_cd_gpio;
+		}
+		ourhost->gpios[cnt] = gpio;
+	}
+
+	for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
+		ret = gpio_request(ourhost->gpios[cnt], "sdhci-gpio");
+		if (ret) {
+			dev_err(dev, "gpio[%d] request failed\n", cnt);
+			goto err_free_dt_gpios;
+		}
+	}
+
+	return 0;
+
+ err_free_dt_gpios:
+	while (--cnt >= 0)
+		gpio_free(ourhost->gpios[cnt]);
+ err_free_dt_cd_gpio:
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
+		gpio_free(ourhost->ext_cd_gpio);
+	return -EINVAL;
+}
+#else
+static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	return -EINVAL;
+}
+#endif
+
+static const struct of_device_id sdhci_s3c_dt_match[];
+
 static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
 			struct platform_device *pdev)
 {
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
+		return (struct sdhci_s3c_drv_data *)match->data;
+	}
+#endif
 	return (struct sdhci_s3c_drv_data *)
 			platform_get_device_id(pdev)->driver_data;
 }
@@ -432,7 +540,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret, irq, ptr, clks;
 
-	if (!pdev->dev.platform_data) {
+	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
 		dev_err(dev, "no device data specified\n");
 		return -ENOENT;
 	}
@@ -454,21 +562,28 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 		dev_err(dev, "sdhci_alloc_host() failed\n");
 		return PTR_ERR(host);
 	}
+	sc = sdhci_priv(host);
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata) {
 		ret = -ENOMEM;
-		goto err_io_clk;
+		goto err_pdata;
+	}
+
+	if (pdev->dev.of_node) {
+		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
+		if (ret)
+			goto err_pdata;
+	} else {
+		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+		sc->ext_cd_gpio = -1; /* invalid gpio number */
 	}
-	memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
 
 	drv_data = sdhci_s3c_get_driver_data(pdev);
-	sc = sdhci_priv(host);
 
 	sc->host = host;
 	sc->pdev = pdev;
 	sc->pdata = pdata;
-	sc->ext_cd_gpio = -1; /* invalid gpio number */
 
 	platform_set_drvdata(pdev, host);
 
@@ -626,6 +741,12 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	clk_put(sc->clk_io);
 
  err_io_clk:
+	for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
+		gpio_free(sc->gpios[ptr]);
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
+		gpio_free(sc->ext_cd_gpio);
+
+ err_pdata:
 	sdhci_free_host(host);
 
 	return ret;
@@ -633,9 +754,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 
 static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 {
-	struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
 	struct sdhci_host *host =  platform_get_drvdata(pdev);
 	struct sdhci_s3c *sc = sdhci_priv(host);
+	struct s3c_sdhci_platdata *pdata = sc->pdata;
 	int ptr;
 
 	if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
@@ -662,6 +783,11 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 	release_resource(sc->ioarea);
 	kfree(sc->ioarea);
 
+	if (pdev->dev.of_node) {
+		for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
+			gpio_free(sc->gpios[ptr]);
+	}
+
 	sdhci_free_host(host);
 	platform_set_drvdata(pdev, NULL);
 
@@ -707,9 +833,22 @@ static struct platform_device_id sdhci_s3c_driver_ids[] = {
 		.name		= "exynos4-sdhci",
 		.driver_data	= EXYNOS4_SDHCI_DRV_DATA,
 	},
+	{},
 };
 MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
 
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_s3c_dt_match[] = {
+	{ .compatible = "samsung,s3c6410-sdhci", },
+	{ .compatible = "samsung,exynos4210-sdhci",
+		.data = &exynos4_sdhci_drv_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+#else
+#define sdhci_s3c_dt_match NULL
+#endif
+
 static struct platform_driver sdhci_s3c_driver = {
 	.probe		= sdhci_s3c_probe,
 	.remove		= __devexit_p(sdhci_s3c_remove),
@@ -719,6 +858,7 @@ static struct platform_driver sdhci_s3c_driver = {
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "s3c-sdhci",
+		.of_match_table = sdhci_s3c_dt_match,
 	},
 };
 
-- 
1.6.6.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux