Kukjin Kim wrote:
>
> From: Jongpill Lee <boyko.lee@xxxxxxxxxxx>
>
> This patch removes code for bus on cpufreq because the code
> for bus frequency changing moves to busfreq driver.
> So code about bus on cpufreq is not necessary.
>
> Signed-off-by: Jongpill Lee <boyko.lee@xxxxxxxxxxx>
> Signed-off-by: SangWook Ju <sw.ju@xxxxxxxxxxx>
> Signed-off-by: Jaecheol Lee <jc.lee@xxxxxxxxxxx>
> Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> ---
> drivers/cpufreq/exynos4210-cpufreq.c | 174
> +---------------------------------
> 1 files changed, 1 insertions(+), 173 deletions(-)
>
> diff --git a/drivers/cpufreq/exynos4210-cpufreq.c
> b/drivers/cpufreq/exynos4210-cpufreq.c
> index b7c3a84..6ff3993 100644
> --- a/drivers/cpufreq/exynos4210-cpufreq.c
> +++ b/drivers/cpufreq/exynos4210-cpufreq.c
> @@ -31,16 +31,8 @@ static struct clk *mout_mpll;
> static struct clk *mout_apll;
>
> static struct regulator *arm_regulator;
> -static struct regulator *int_regulator;
>
> static struct cpufreq_freqs freqs;
> -static unsigned int memtype;
> -
> -enum exynos4_memory_type {
> - DDR2 = 4,
> - LPDDR2,
> - DDR3,
> -};
>
> enum cpufreq_level_index {
> L0, L1, L2, L3, CPUFREQ_LEVEL_END,
> @@ -93,87 +85,24 @@ static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2]
> =
> {
> { 3, 0 },
> };
>
> -static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = {
> - /*
> - * Clock divider value for following
> - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
> - * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
> - */
> -
> - /* DMC L0: 400MHz */
> - { 3, 1, 1, 1, 1, 1, 3, 1 },
> -
> - /* DMC L1: 400MHz */
> - { 3, 1, 1, 1, 1, 1, 3, 1 },
> -
> - /* DMC L2: 266.7MHz */
> - { 7, 1, 1, 2, 1, 1, 3, 1 },
> -
> - /* DMC L3: 200MHz */
> - { 7, 1, 1, 3, 1, 1, 3, 1 },
> -};
> -
> -static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = {
> - /*
> - * Clock divider value for following
> - * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133,
> DIVONENAND }
> - */
> -
> - /* ACLK200 L0: 200MHz */
> - { 3, 7, 4, 5, 1 },
> -
> - /* ACLK200 L1: 200MHz */
> - { 3, 7, 4, 5, 1 },
> -
> - /* ACLK200 L2: 160MHz */
> - { 4, 7, 5, 7, 1 },
> -
> - /* ACLK200 L3: 133.3MHz */
> - { 5, 7, 7, 7, 1 },
> -};
> -
> -static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = {
> - /*
> - * Clock divider value for following
> - * { DIVGDL/R, DIVGPL/R }
> - */
> -
> - /* ACLK_GDL/R L0: 200MHz */
> - { 3, 1 },
> -
> - /* ACLK_GDL/R L1: 200MHz */
> - { 3, 1 },
> -
> - /* ACLK_GDL/R L2: 160MHz */
> - { 4, 1 },
> -
> - /* ACLK_GDL/R L3: 133.3MHz */
> - { 5, 1 },
> -};
> -
> struct cpufreq_voltage_table {
> unsigned int index; /* any */
> unsigned int arm_volt; /* uV */
> - unsigned int int_volt;
> };
>
> static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END]
> =
> {
> {
> .index = L0,
> .arm_volt = 1200000,
> - .int_volt = 1100000,
> }, {
> .index = L1,
> .arm_volt = 1100000,
> - .int_volt = 1100000,
> }, {
> .index = L2,
> .arm_volt = 1000000,
> - .int_volt = 1000000,
> }, {
> .index = L3,
> .arm_volt = 900000,
> - .int_volt = 1000000,
> },
> };
>
> @@ -242,80 +171,6 @@ static void exynos4_set_clkdiv(unsigned int
div_index)
> do {
> tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
> } while (tmp & 0x11);
> -
> - /* Change Divider - DMC0 */
> -
> - tmp = __raw_readl(S5P_CLKDIV_DMC0);
> -
> - tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK |
> S5P_CLKDIV_DMC0_ACPPCLK_MASK |
> - S5P_CLKDIV_DMC0_DPHY_MASK |
> S5P_CLKDIV_DMC0_DMC_MASK |
> - S5P_CLKDIV_DMC0_DMCD_MASK |
> S5P_CLKDIV_DMC0_DMCP_MASK |
> - S5P_CLKDIV_DMC0_COPY2_MASK |
> S5P_CLKDIV_DMC0_CORETI_MASK);
> -
> - tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) |
> - (clkdiv_dmc0[div_index][1] <<
> S5P_CLKDIV_DMC0_ACPPCLK_SHIFT)
> |
> - (clkdiv_dmc0[div_index][2] <<
> S5P_CLKDIV_DMC0_DPHY_SHIFT) |
> - (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT)
> |
> - (clkdiv_dmc0[div_index][4] <<
> S5P_CLKDIV_DMC0_DMCD_SHIFT) |
> - (clkdiv_dmc0[div_index][5] <<
> S5P_CLKDIV_DMC0_DMCP_SHIFT) |
> - (clkdiv_dmc0[div_index][6] <<
> S5P_CLKDIV_DMC0_COPY2_SHIFT) |
> - (clkdiv_dmc0[div_index][7] <<
> S5P_CLKDIV_DMC0_CORETI_SHIFT));
> -
> - __raw_writel(tmp, S5P_CLKDIV_DMC0);
> -
> - do {
> - tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
> - } while (tmp & 0x11111111);
> -
> - /* Change Divider - TOP */
> -
> - tmp = __raw_readl(S5P_CLKDIV_TOP);
> -
> - tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK |
> S5P_CLKDIV_TOP_ACLK100_MASK |
> - S5P_CLKDIV_TOP_ACLK160_MASK |
> S5P_CLKDIV_TOP_ACLK133_MASK |
> - S5P_CLKDIV_TOP_ONENAND_MASK);
> -
> - tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT)
> |
> - (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT)
> |
> - (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT)
> |
> - (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT)
> |
> - (clkdiv_top[div_index][4] <<
> S5P_CLKDIV_TOP_ONENAND_SHIFT));
> -
> - __raw_writel(tmp, S5P_CLKDIV_TOP);
> -
> - do {
> - tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
> - } while (tmp & 0x11111);
> -
> - /* Change Divider - LEFTBUS */
> -
> - tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
> -
> - tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK |
> S5P_CLKDIV_BUS_GPLR_MASK);
> -
> - tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT)
> |
> - (clkdiv_lr_bus[div_index][1] <<
> S5P_CLKDIV_BUS_GPLR_SHIFT));
> -
> - __raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
> -
> - do {
> - tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
> - } while (tmp & 0x11);
> -
> - /* Change Divider - RIGHTBUS */
> -
> - tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
> -
> - tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK |
> S5P_CLKDIV_BUS_GPLR_MASK);
> -
> - tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT)
> |
> - (clkdiv_lr_bus[div_index][1] <<
> S5P_CLKDIV_BUS_GPLR_SHIFT));
> -
> - __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
> -
> - do {
> - tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
> - } while (tmp & 0x11);
> }
>
> static void exynos4_set_apll(unsigned int index)
> @@ -404,7 +259,7 @@ static int exynos4_target(struct cpufreq_policy
*policy,
> unsigned int relation)
> {
> unsigned int index, old_index;
> - unsigned int arm_volt, int_volt;
> + unsigned int arm_volt;
>
> freqs.old = exynos4_getspeed(policy->cpu);
>
> @@ -424,7 +279,6 @@ static int exynos4_target(struct cpufreq_policy
*policy,
>
> /* get the voltage value */
> arm_volt = exynos4_volt_table[index].arm_volt;
> - int_volt = exynos4_volt_table[index].int_volt;
>
> cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
>
> @@ -432,7 +286,6 @@ static int exynos4_target(struct cpufreq_policy
*policy,
> if (freqs.new > freqs.old) {
> /* Voltage up */
> regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
> - regulator_set_voltage(int_regulator, int_volt, int_volt);
> }
>
> /* Clock Configuration Procedure */
> @@ -442,7 +295,6 @@ static int exynos4_target(struct cpufreq_policy
*policy,
> if (freqs.new < freqs.old) {
> /* Voltage down */
> regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
> - regulator_set_voltage(int_regulator, int_volt, int_volt);
> }
>
> cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
> @@ -519,27 +371,6 @@ static int __init exynos4_cpufreq_init(void)
> goto out;
> }
>
> - int_regulator = regulator_get(NULL, "vdd_int");
> - if (IS_ERR(int_regulator)) {
> - printk(KERN_ERR "failed to get resource %s\n", "vdd_int");
> - goto out;
> - }
> -
> - /*
> - * Check DRAM type.
> - * Because DVFS level is different according to DRAM type.
> - */
> - memtype = __raw_readl(S5P_VA_DMC0 +
> S5P_DMC0_MEMCON_OFFSET);
> - memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT);
> - memtype &= S5P_DMC0_MEMTYPE_MASK;
> -
> - if ((memtype < DDR2) && (memtype > DDR3)) {
> - printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__,
> memtype);
> - goto out;
> - } else {
> - printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__,
> memtype);
> - }
> -
> return cpufreq_register_driver(&exynos4_driver);
>
> out:
> @@ -558,9 +389,6 @@ out:
> if (!IS_ERR(arm_regulator))
> regulator_put(arm_regulator);
>
> - if (!IS_ERR(int_regulator))
> - regulator_put(int_regulator);
> -
> printk(KERN_ERR "%s: failed initialization\n", __func__);
>
> return -EINVAL;
> --
> 1.7.1
Dave,
Sorry, since my git send-email has some problem, I used mail clients...so
automatically line changed :(
Please just review this series then will re-submit.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
