Hatim Ali wrote:
>
> Add support for TVOUT on SMDKV310 board.
>
> Signed-off-by: Hatim Ali <hatim.rv@xxxxxxxxxxx>
> ---
> Changes since v2:
> Incorporated review comments by Tomasz Stanislawski & Sylwester Nawrocki.
> - Used gpio_request_one to request for gpio line.
> - Added WARN_ON to check gpio_request is successful.
>
> Changes since v1:
> Incorporated changes as suggested by Tomasz Stanislawski
> - Added GPIO settings for hot-plug detection.
> - Added setting hdmi and mixer's parent for TV power domain.
>
> arch/arm/mach-exynos4/Kconfig | 2 ++
> arch/arm/mach-exynos4/mach-smdkv310.c | 18 ++++++++++++++++++
> 2 files changed, 20 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index 690bf6f..2857ab0 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -139,7 +139,9 @@ config MACH_SMDKV310
> select S3C_DEV_RTC
> select S3C_DEV_WDT
> select S3C_DEV_I2C1
> + select S5P_DEV_I2C_HDMIPHY
> select S5P_DEV_MFC
> + select S5P_DEV_TV
> select S3C_DEV_HSMMC
> select S3C_DEV_HSMMC1
> select S3C_DEV_HSMMC2
> diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-
> exynos4/mach-smdkv310.c
> index 5f62b2b..fa3f9d7 100644
> --- a/arch/arm/mach-exynos4/mach-smdkv310.c
> +++ b/arch/arm/mach-exynos4/mach-smdkv310.c
> @@ -173,6 +173,7 @@ static struct platform_device *smdkv310_devices[]
> __initdata = {
> &s3c_device_hsmmc2,
> &s3c_device_hsmmc3,
> &s3c_device_i2c1,
> + &s5p_device_i2c_hdmiphy,
> &s3c_device_rtc,
> &s3c_device_wdt,
> &exynos4_device_ac97,
> @@ -194,6 +195,8 @@ static struct platform_device *smdkv310_devices[]
> __initdata = {
> &samsung_asoc_idma,
> &smdkv310_smsc911x,
> &exynos4_device_ahci,
> + &s5p_device_hdmi,
> + &s5p_device_mixer,
> };
>
> static void __init smdkv310_smsc911x_init(void)
> @@ -230,6 +233,18 @@ static struct platform_pwm_backlight_data
> smdkv310_bl_data = {
> .pwm_period_ns = 1000,
> };
>
> +static void s5p_tv_setup(void)
> +{
> + /* direct HPD to HDMI chip */
> + WARN_ON(gpio_request_one(EXYNOS4_GPX3(7),GPIOF_IN, "hpd-
> plug"));
ERROR: space required after that ',' (ctx:VxV)
#64: FILE: arch/arm/mach-exynos4/mach-smdkv310.c:239:
+ WARN_ON(gpio_request_one(EXYNOS4_GPX3(7),GPIOF_IN, "hpd-plug"));
Hmm...
OK, applied even though I don't think we really need to add WARN_ON here
because the board manager already knows the gpio pin is used for it.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> + s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
> + s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
> +
> + /* setup dependencies between TV devices */
> + s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
> + s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
> +}
> +
> static void __init smdkv310_map_io(void)
> {
> s5p_init_io(NULL, 0, S5P_VA_CHIPID);
> @@ -254,6 +269,9 @@ static void __init smdkv310_machine_init(void)
> s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
> s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
>
> + s5p_tv_setup();
> + s5p_i2c_hdmiphy_set_platdata(NULL);
> +
> samsung_keypad_set_platdata(&smdkv310_keypad_data);
>
> samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
> --
> 1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
