RE: [PATCH V5 0/6] ARM: S5P64X0: Add Framebuffer support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ajay Kumar wrote:
> 
>  The patches are created against "for-next" branch of Kukjin Kim's tree
at:
>  git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> 
>  Changes since V1:
> 	- Remove mach/regs-fb.h, instead use plat/regs-fb.h.
> 	- Add common pdata for FB and LCD in SMDK6440 and SMDK6450.
> 	- Modify names(s5p-->smdk), max_bpp and refresh rate.
> 	- Modify variable name(cfg-->chipid).
> 	- Use __raw_readl, __raw_writel instead of readl and writel.
> 
>  Changes since V2:
> 	-Change name of the config-COMMON_FB to SMDK64X0_COMMON_FB.
> 	-Change filename common-fb.h to smdk64x0-common-fb.h.
> 	-Change filename common-fb.c to smdk64x0-common-fb.c.
> 
>  Changes since V3:
> 	-Add FB and LCD plat-data in corresponding machine files
> 	 instead of creating common file smdk64x0-common-fb.c.
> 	-Modify name S5P64X0_SETUP_FB to S5P64X0_SETUP_FB_24BPP.
> 	-Modify file name setup-fb.c to setup-fb-24bpp.c.
> 	-Move SPCON settings to machine file.
> 	-Use soc_is_s5p6440()/soc_is_s5p6450() to check CPU ID.
> 
>  Changes since V4:
> 	-Removed refresh rate from plat data(s3c_fb_pd_win)
> 	-Fixed complation warning:"function declaration isn't a prototype"
> 	 for s5p6440_set_lcd_interface() and s5p6450_set_lcd_interface().
> 
> 
>   These patches have dependency on the patch:
>   "ARM: S5P64X0: Fix mask value for S5P64X0 CPU IDs",
>   at http://www.spinics.net/lists/arm-kernel/msg138990.html
> 
> o To Kukjin,
>   [PATCH RESEND V5 1/6] video: s3c-fb: Add S5P64X0 specific
> s3c_fb_driverdata
>   [PATCH RESEND V5 2/6] ARM: S5P64X0: Add register base and IRQ for
> Framebuffer
>   [PATCH RESEND V5 3/6] ARM: S5P64X0: Set s3c_device_fb name
>   [PATCH RESEND V5 4/6] ARM: S5P64X0: Add GPIO setup for LCD
>   [PATCH V5 5/6]ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer
> support
>   [PATCH V5 6/6]ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer
> support
> 
>  arch/arm/mach-s5p64x0/Kconfig                  |   10 +++
>  arch/arm/mach-s5p64x0/Makefile                 |    1 +
>  arch/arm/mach-s5p64x0/cpu.c                    |    3 +
>  arch/arm/mach-s5p64x0/include/mach/irqs.h      |    4 +
>  arch/arm/mach-s5p64x0/include/mach/map.h       |    3 +
>  arch/arm/mach-s5p64x0/include/mach/regs-gpio.h |    4 +
>  arch/arm/mach-s5p64x0/mach-smdk6440.c          |   74
> +++++++++++++++++++++++
>  arch/arm/mach-s5p64x0/mach-smdk6450.c          |   75
> ++++++++++++++++++++++++
>  arch/arm/mach-s5p64x0/setup-fb-24bpp.c         |   29 +++++++++
>  arch/arm/plat-samsung/include/plat/fb.h        |    7 ++
>  drivers/video/s3c-fb.c                         |   27 +++++++++
>  11 files changed, 237 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-s5p64x0/setup-fb-24bpp.c

Looks ok to me, will apply.

But as I said, the 'video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata'
should be sent to Florian's tree.

I think, it's enough to re-send it to Florian Tobias Schandina.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux